Thickness Monitoring Services For Monitoring And Testing Available In Luxembourg
-
Manufactured by McPhersonbased in USA
McPherson certifies parts and assemblies for use in high vacuum and UHV. We have capabilities to machine, weld, Helium leak test and RGA certify. We control all the critical aspects of vacuum fabrication. We have made thousands of vacuum ...
-
Manufactured by Pure Technologies - a Xylem brandbased in CANADA
Historically, there have been few assessment solutions available for metallic pipe materials, making them challenging to manage safely. Our suite of metallic pipe solutions can determine the actual condition of pipes by identifying pipe wall stress, corrosion and wall loss. With a strong dedication to research and development, Pure has developed a variety of tools that offer different resolution ...
-
Manufactured by Sensory Analytics LLCbased in USA
SpecMetrix offline systems set a higher standard for non-contact, non-destructive film layer and coating QA analysis. Global companies in a wide range of industries use our technology as the preferred forensic tool based on its unmatched ability to identify and quantify thin coating or layer thickness defects with nanometric ...
-
based in CANADA
Ground penetrating radar (GPR) offers safe and comprehensive scanning for a wide range of applications and is is arguably Earth Scan's most versatile tool. This powerful, yet non-destructive, tool is perfect for many jobs including; identifying and locating geologic structures, locating abandoned infrastructure such as pipelines or landfills, mapping bedrock profiles on future highway ...
-
Manufactured by Plastichem Limitedbased in UNITED KINGDOM
Plastichem is equipped to provide a range of site services including : Installation of pipe systems. Lining of tanks and vessels. Inspection of existing linings. Spark testing . GRP Thickness testing. Repairs to existing GRP equipment. Repair of sheet thermoplastic and fluoropolymer ...
-
based in POLAND
The company operates the Factory Production Control System in accordance with the PN-EN 1090-1 + A1: 2012 and PN-EN ISO 3834-2: 2007 standards. The Factory Production Control (FPC) specifies the requirements for the conformity assessment of the properties of steel elements and sets of structural elements. The FPC is a permanent internal control of production carried out at all stages of product ...
-
Manufactured by Kurt J. Lesker Companybased in USA
The Kurt J. Lesker Company (KJLC) has been providing customers with high quality and technologically advanced products and services since 1954. Through our manufacturing, distribution and support facilities in North America, Europe and Asia, KJLC has become a world leader in the distribution, design, manufacture and support of vacuum products and deposition systems. The Process Equipment ...
-
Manufactured by Huatec Group Corporationbased in CHINA
HUATEC Group products are composed of all kinds of metal and non-metal testing equipments, such as portable hardness tester, micro hardness tester, shore durometer, vickers hardness tester, Rockwell hardness tester, Brinell hardness tester, portable X-ray flaw detector, mobile X-ray flaw detector, Real-time X-ray image flaw system, holiday detector, digital portable eddy current electrical ...
-
based in USA
Underwater structural inspections for dams are critical to identify any signs of degradation or loss of functionality. With more than 29 years of experience, Hibbard Inshore’s inspections have included penstocks, face of dam, lower outlets, toe of dam, intakes, head gates and seals, trash racks, turbines, and turbine shut off valves. Hibbard Inshore can equip each of their ROVs with ...
-
Manufactured by TG-Machines Sp. z o.o.based in POLAND
CAD/CAM/CFD/FEM design; Analysis of the existing machine layout in the plant; Modernization of technological lines in order to reduce saturated steam consumption; Strength calculations of machines, ...
-
by GPR Data LLCbased in USA
We can see into concrete before drilling, cutting or coring: Rebar placement, depth, position, Rebar inspection, Slab thickness, Inspect walls, floors, decks, slabs, tunnels, balconies and garages, Post tension mapping, Concrete, asphalt, masonry block, grouted cells, ICF ...
-
based in NETHERLANDS
Visser & Smit Hanab is a specialist in inspecting and cleaning pipes, or ‘pigging', as it is known, doing everything from make pipelines ‘piggable' to performing inspections and cleaning. We make it our goal to prevent disruptions and unnecessary maintenance. ...
-
based in FINLAND
Moisture mapping in concrete structures. Structure and problem mapping: Roadscanners does concrete surveys where it is possible to locate for example. Locate metallic and non-metallic targets in walls, floors and ceilings (rebar, conduits, post-tension cables). Measure slab thickness. Structure inspection and condition assessment. Moisture mapping, voids and crack ...
-
based in TURKEY
Deniz Quality provides Ultrasonic Testing (UT) services for the detection and location of discontinuities, material composition anlysis and thickness measurement. In ultrasonic testing (UT), ultrasonic probes move on a straight line and at a constant speed until they come across a surface and send ultrasonic waves into the material. While these ultrasonic waves are transmitting, they cause ...
-
based in USA
Complete inspection following API-653 In-Service inspection checklist. Thickness reading on shell plates. Thickness reading on roof plates. Visual inspection with photographs and/or a record of any visible defects. Thickness reading on all accessible nozzles. Shell layout drawings. Nozzle layout drawings. Layout of defects. Settlement survey. Post inspection meeting to discuss findings. ...
-
based in UNITED KINGDOM
In recent years, it has become commonplace for buildings in the UK to have some form of air conditioning system installed. Whether this be a large air handling system serving fresh air throughout a complex network of ducts or a simple split unit serving one small room, they all have one thing in common; to provide the building users with clean, fresh air. Over time these systems can become ...
-
by Testmerbased in TURKEY
A) Control of Lifting and Transport Equipment Lifting Machines and vehicles shall be checked by the operators before operation, and steel cables, chains, hooks, straps, pulleys, brakes and automatic stoppers shall be checked entirely once in every three months by an authorized technician, and a control document shall be prepared and kept in a special file at the work place. Lifting Machines ...
-
Manufactured by Aptest NDT Servicesbased in INDIA
UT - Ultrasonic Testing: Ultrasonic nondestructive testing, also known as ultrasonic NDT or simply UT, is a method of characterizing the thickness or internal structure of a test piece through the use of high frequency sound waves. The frequencies, or pitch, used for ultrasonic testing are many times higher than the limit of human hearing, most commonly in the range from 500 KHz to 20 ...
-
by Fugrobased in NETHERLANDS
Some of the most demanding applications of NDT (nondestructive testing) are found in nuclear energy, power generation, petrochemicals, mining, construction and the oil and gas industries. To meet the stringent requirements of these applications, Fugro has developed a range of professional services that use a complete suite of equipment, operated by highly qualified technical ...
-
Manufactured by Zetec, Incbased in USA
Improve inspection confidence without compromising productivity: A successful corrosion mapping inspection is the result of the combination of a high probability of detection on corrosion damages like pitting, with the confidence that the full area of interest has been totally covered. In recent years, the situation has changed with the availability of off-the-shelf phased array equipment. These ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you