Tomography Software For Monitoring And Testing Near Ontario
-
by W_GeoSoftbased in SWITZERLAND
This very user-fnendly program has been designed for the crosshole seismic interpretation using SIRT ...
-
by W_GeoSoftbased in SWITZERLAND
TomTime allows the user to pick traveltimes and amplitudes, and save those data with source and receiver 3-D coordinates in the format used as input by the tomography program ...
-
by GeoTom, LLCbased in USA
GeoTomCG can process and display 2-D and 3-D crosshole or VSP seismic or radar data. The display below shows calculated seismic velocities from a dam in Taiwan being investigated for earthquake damage1. S and R indicate source and receiver positions, respectively. The crosshatch pattern indicates areas with few raypaths. The investigators reported that the seismic velocities were consistent with ...
-
by W_GeoSoftbased in SWITZERLAND
This software works under Windows 32 and 64 bits It takes benefit of its display qualities, uses all the peripherals for printing and allows the transfer of the graphs by copy-and-paste and as metafiles. The use of the software is easy and intuitive. ...
-
by GeoTom, LLCbased in USA
Display features. The display below shows traces 34 to 51 from a 146-trace seismograph file. Red squares are auto-picks. Blue dots and arrows are final picks, which usually can be left at the auto-pick positions with good data. Green and blue-green amplitude dots (hard to see in this display) are on the three peaks following the time pick. Trace 35 was labeled dead, so the time is 0. The ...
-
by W_GeoSoftbased in SWITZERLAND
The only data files that the demo version can read are the data files included with the program set. Trying to read any other data files will make the program ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
ZondST3D is designed for 3-D data processing and interpretation for seismic tomography by method of refracted waives. There are several options: Ground profiles (3D); Down hole; Water ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
ZondST2D is designed for 2D data processing and interpretation of seismic tomography by method of refracted waives. There are several options: Ground profiles; Water surface; Downhole; ...
-
Manufactured by Industrial Tomography Systems Ltd. (ITS)based in UNITED KINGDOM
.ITS’s P2+ tomography software enables customers to get the most out of their P2+ ERT instrumentation, empowering users to understand, monitor and control their processes. As well as driving the P2+ instrument, our latest Version 9 software covers all the essential features of the previous ITS tomography software, providing: Real-time tomography images, both as individual planes and ...
-
Manufactured by LighTopTech Corpbased in USA
3D image registration tool for motion correction that minimizes image distortions. FrameAlign™ key features: compatible with Optical Coherence Tomography TIFF stacks and .OCT stacks. traditional stack registration available. proprietary algorithm for volume registration minimizes distortions. batch mode processing ...
-
Manufactured by LighTopTech Corpbased in USA
3D image visualization and annotation for life sciences, research and manufacturing. Viewer 4D™ key features: compatible with Optical Coherence Tomography TIFF stacks and .OCT stacks. sagittal, coronal, and transverse plane displays. 3D rendering with rotation and z-cropping. real time adjacent slice averaging in all dimensions. full control of color balance, brightness, and contrast. user ...
-
based in USA
Medical imaging technologies such as MRI, ultrasound, and computed tomography have revolutionized medicine. We believe that risk analysts, regulators, decision makers, and the public would benefit if analogous imaging techniques were available to penetrate the cloud of uncertainty and disagreement surrounding risk data. RAMAS® Risk Imaging software provides visualizations of risk in the ...
-
based in USA
2DynaEIT is a suite of efficient and accurate algorithms for solution of the two-dimensional forward and inverse Electrical Impedance Tomography (EIT) problems. The forward problem is the problem of determination of voltage and current distribution for known conductivity distribution in the imaged domain, while the inverse problem is the problem of image reconstruction using the measured voltages ...
-
based in CANADA
Highly interactive first-break picking and automatic phantom to derive layered velocity structures with ...
-
based in CANADA
Derive three-dimensional subsurface velocity structures with efficient first-break picking and fast 3D shortest path ray ...
-
based in CANADA
Estimate subsurface velocity structures with efficient first-break picking and fast shortest path ray ...
-
based in CANADA
Efficiently derive velocity structures among vertical or deviated wells with fast and robust ray ...
-
by GeoTomo, LLCbased in USA
TomoPlus is a comprehensive near-surface solutions package. It is designed to obtain an accurate near-surface velocity model , and derive accurate long and short wavelength statics solution to help seismic data ...
-
by GeoTomo, LLCbased in USA
GeoThrust has been designed with a workflow architecture to obtain an accurate earth model and earth image in time and in depth from data recorded with irregular geometry in areas with rough topography, complex near-surface, and complex subsurface, with uncompromisingly high technical specifications for data analysis and quality control, but easy to learn and easy to ...
-
Manufactured by PASI s.r.l.based in ITALY
Data Inversion Software For Electrical Imaging And Induced Polarization (Ip) Res3dinv. Arization (Ip) Res3dinv. This software has been developped for the inversion of data collected as to an electrode grid with rectangular meshes (Loke & Barker, 1996). The spreadings being supported include Pole-Pole, Pole-Dipole, line Dipole-Dipole, equatorial Dipole-Dipole and Wenner-Schlumberger. RES3DINV ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you