Total Mercury Monitoring Equipment For Monitoring And Testing Available In Nunavut
-
ShowcaseManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran 2537 performs continuous long-term, unattended analysis of gaseous elemental mercury with unmatched accuracy, sensitivity, and reliability. The Tekran 2537 is easy to setup, use, and maintain and has long been known for its stable performance in rugged conditions. Our instruments have been installed at both Polar Regions, on ocean research vessels and hundreds of locations in between. ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Mercury CEM (HgCEM) Systems are currently operating at over 130 sources to comply with strict US EPA regulations. In addition, there are numerous installations in Asia and Europe. For every installation, we have met and exceeded all performance requirements for our customer’s state and federal regulations. The Series 3400 is designed to measure total gaseous mercury emissions, ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Key Features: Class 1 Div 2 cabinet for use in hazardous environments. ASTM-6350 and ISO-6978 method compliant. Dual-bed gold sample trap design avoids analytical gold cartridge exposure to complex sample gas. Multiple automated QA routines validate method performance. Range of 1 ng/m3 to 2 mg/m3. Network enabled for remote operation. Cabinet integration and design by Tekran Partner: Orbital Gas ...
-
PremiumManufactured by ENVEAbased in FRANCE
Beneficiary of over 20 years of experience in mercury measurement, the new SM-5 CEMS Hg analyzer is designed to provide extremely accurate and reliable continuous measurements of very low concentrations of Hg in flue gas emissions. The SM-5 features short response times, dynamic ranges and stable measurement under all ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
The Xact 640 system uses reel-to-reel filter tape sampling and nondestructive X-ray fluorescence (XRF) analysis to monitor stack hazardous air pollutant (HAP) metal emissions. An isokinetic sub-sample of stack gas goes into the stilling chamber and then drawn through a chemically reactive filter tape. Vapor phase metals, including mercury, are deposited along with particulate-phase metals on the ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Sorbent trapsprovide total mercury measurement as well as speciated mercury measurement (oxidized and elemental mercury phases). The flue gas sample is collected using a heated sample probe and calibrated pumping system. Mercury is captured by adsorption in sorbent traps media. The material in these traps is later analyzed using Zeeman mercury analyzer RA-915M and PYRO-915+ attachment. Traps are ...
-
PremiumManufactured by ENVEAbased in FRANCE
Measuring of Total Gaseous Mercury (TGM) in air and other gases. Reliable for measurements at ultra-trace levels (sub-ng/m³) according to EN 15852. The UT-3000 operates automatically. All functions are controlled by an embedded microprocessor. When measurements are carried out, all parameters and results are stored in the integrated data logger. With standard settings the data logger has a ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
System 400HWE Hot Wet Extractive is based on OPSIS UV/FTIR DOAS system giving fast response and best possible performance for all gases. The high resolution FTIR system is free from interference from all gases including ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Series 2600 system allows the analysis of ultra-trace levels of total mercury in laboratory prepared environmental samples (water, biota, soil, sediments, gas cartridges, effluents and more). It offers unparalleled sensitivity and flexibility for those who require truly sensitive total mercury analysis. The Series 2600 is capable of providing a fully automated implementation of EPA ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The New Tekran 3300Xi has the same proven components of the successful Tekran 3300. The Tekran 3300Xi is modular, simpler to install and maintain, includes the new Tekran 2537Xi detector and is operated with updated CEM+ software (Tekran 3321 pictured). The 3300Xi is the ideal platform for inlet- outlet control technology optimization, regulatory monitoring of mercury emissions and bench-scale ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Sorbent traps provide total mercury measurement as well as speciated mercury measurement (oxidized and elemental mercury phases). The flue gas sample is collected using a heated sample probe and calibrated pumping system. Mercury is captured by adsorption in sorbent traps media. The material in these traps is later analyzed using Zeeman mercury analyzer RA-915M and PYRO-915+ attachment. Traps are ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Cold Vapor Atomic Fluorescence (CVAF) is a powerful technique based on detecting fluorescence light emitted by the sample. Below the principle of the technique is explained in a ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Based upon our highly successful 2537 platform, the 2537Xi-NG on-line natural gas analyzer provides an automated application of ASTM D6340 and ISO 6978 methods. Working with an industry partner, we provide a fully integrated sampling solution including probes, pressure let-down, integrated purge cabinets, and analysis. The Tekran Model 2537Xi-NG Natural Gas Mercury Monitor is designed for ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.). With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of wet chemistry. The SM-4 Mercury Monitor is QAL1 certified ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.). With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of wet chemistry. The SM-4 Mercury Monitor is QAL1 certified ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Electronics Platform: Network enabled. Touch screen interface. Local data storage and front panel USB port. Remote access (troubleshooting, control and configuration). Improved data and instrument parameter logging. Additional functionality via optional s/w plugins (std. additions, remote valve control, and much ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Waste incinerators, cement plants and power plants need good and reliable measurements of total gaseous mercury. The measurement of total gaseous mercury (TGM) is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintanence still not giving reliable ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Continuous Mercury Monitoring systems CMM AutoQAL and CMM systems are the perfect solutions for monitoring mercury continuously from hot, wet and corrosive gas streams. These future-proof systems have the lowest certified range in the world (0-5 µg/m3) and CMM AutoQAL has an automatic and integrated QAL3 validation ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Series 3300Xi Mercury CEM is in place at over 130 sources in the U.S. For every installation, we have met and exceeded all performance requirements for our customer’s state and federal regulations. Tekran® is the most experienced mercury monitoring resource in the world and continues to lead in mercury compliance monitoring, abatement system control and mobile testing ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model NG-80 Mercury Monitor is designed for automated analysis of natural gas streams. The system contains an atomic fluorescence detector, dual stage thermal desorption, with digital data acquisition and control systems. The system complies fully with ASTM-D6350 and ISO 6978 methods with built-in automated QA/QC method protocols. This integrated solution uses specialized sampling ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you