Only show results available in Virginia? Ok

Total Organic Carbon (TOC) Monitoring Applications

  • Premium

    Process Analytics - Water Purification (THORNTON)

    THORNTON specializes in measurements for pure and ultrapure water treatment with parameters of resistivity, conductivity, total organic carbon (TOC), flow, pH, ORP, dissolved oxygen and ozone. THORNTON products are frequently used in semiconductor and microelectronics manufacturing, pharmaceutical and biotechnology processing, and power and steam generation, as well as food and beverage production.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Determination of TOC in stack

    PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyser which uses hydrogen and other reference gases in pressurized cylinder. Operators must then approach the sampling point, often placed several meters from the ground, climbing chimneys of industrial settlements with...

    By Pollution Analytical Equipment based in Budrio (Bologna), ITALY.

  • Premium

    UV fluorescence technology for raw water intake monitoring industry

    Naturally occurring organics in raw water are typically removed with chemicals. Total Organic Carbon (TOC) analyzers in the water treatment system can alert technicians when generic organic material is present but cannot differentiate between natural organics, such as algae or decomposed plant matter, and hydrocarbons. Using UV fluorescence technology, a properly configured TD-4100XD can alert operators to upsets caused by hydrocarbons such as gasoline, diesel, fuel oil, and crude oil.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Analytical instruments for elemental analysis

    Elemental analysis is a generic term for a group of applications which deal with the analysis of a variety of materials (chemicals, liquids, polymers, waste material, etc.) for their elemental or isotopic properties. Typical examples of elemental analysis techniques where mass flow control plays a key role are Total Organic Carbon (TOC) or Total Organic Halides (TOX).

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    Online Monitoring for the Demi-Water Production Industry

    Demineralization is the process of removing mineral salts as well as organic impurities from water by means of ion-exchange and can be found in various industries such as the chemical, food & beverage, irrigation and filtration industries. The consuming side of the industry relies on ever increasing quality and availability of demi-water while the manufacturers have to balance cost/output. AppliTek provides high quality analytical tools to increase process efficiency and quality control. Continuous measureme...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Ultraviolet disinfection systems for the total organic carbon (TOC) reduction sector

    Total Organic Carbon (TOC) is found in all water supplies as naturally occurring organic matter. Over many years of experience, medium or low pressure UV treatment has become recognised as an effective process step in the breakdown and reduction of TOC in water intended for use in pharmaceutical, health care, power generation and micro-electronics applications. In the latter case, ultra-pure water is used to wash silicon wafers on which even small deposits of carbon compounds on the wafers can severely affect...

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    High quality gas sensor solutions for total organic carbon (TOC)

    Minimising costs through measurement of CO2 concentration. Both water suppliers and water users need to know the quality of the water they are supplying, using and disposing of so as to minimise their costs. One measure of water quality is the organic carbon content (TOC). TOC is measured by oxidising the organic carbon to produce CO2 which is then measured and the value converted into a TOC measurement. Edinburgh Sensors supply sensors to measure the CO2 concentration produced by oxidising the organic carbon...

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Filtration for water testing

    Chemical purity of water is assessed for a wide variety of different chemicals depending on the type of water and applicable local legislation. 

    Chemical analysis of water can include testing for nitrogen compounds, dissolved heavy metals, and total and dissolved organic carbon.

    Common water monitoring applications include:

    • Determination of suspended solids in waterusing for example glass fiber filters.
    • Chemical analyses of for example heavy metals, dissolved...

    By GE Healthcare Life Sciences based in Marlborough, MASSACHUSETTS (USA).

  • Water quality monitoring for semiconductor industry

    Water is fundamental to the manufacturing process in a semiconductor facility. Electronic components are rinsed or washed several times during the producing process with ultrapure water (UPW) to remove residue. Continuous monitoring of organic constituents (TOC) on the influent city water assist with UPW production. Good quality waste streams for the manufacturing process can also be monitored for reuse potential.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water intake protection monitoring for wastewater treatment industry

    Intake protection systems have been extensively installed to protect water treatment works, from ingress of polluted water and waste-water plants from toxic chemical loads. A suitable system typically comprises a suit of instrumentation, measuring key chemical, physical and indicator parameters dependant upon the identified risks, associated with the individual site activity or discharges from neighbouring industry.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • TOC Correlation to BOD or COD

    Challenge: Biochemical Oxygen Demand (BOD) and Chemical Oxygen Demand (COD) are traditional parameters analyzed in the laboratory to determine organic matter in water and wastewater. Wastewater facility operators need to have constant data to monitor their discharges and optimize treatment processes (biological treatment, chemical dosing, etc). The requirements of BOD and COD analysis prevent them from being implemented as control parameters, however. The BOD five-day analysis time requirement...

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

  • Monitoring industrial trade discharge for wastewater treatement industry

    Industry has had to respond to the requirements of progressive environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide trade discharge monitoring and perform...

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Disinfection solutions for water treatment industry

    Ballast Water Solutions. Ship ballasts often carry aquatic organisms that can cause a significant problem when transported from one body of water to another. In fact, the invasion of non-native species via ballast water has been described by maritime and environmental authorities as `one of the greatest threats to the world`s waterways.`

    By Calgon Carbon Corporation based in Moon Township, PENNSYLVANIA (USA).

  • Chemical Oxygen Demand (COD) Analyzer for Cleaner and Safer Drinking Water

    MANTECH’s chemical oxygen demand (COD) analyzer is breaking new ground in the science of monitoring source and treated drinking water. In addition to providing 15-minute COD results and biochemical oxygen demand (BOD) estimates, MANTECH’s PeCOD® Analyzer measures natural organic matter (NOM) in raw and treated drinking water. The NOM Analyzer™  — which is the drinking-water application of MANTECH’s novel PeCOD® COD-testing system — does what no other...

    By MANTECH Inc. based in Guelph, ONTARIO (CANADA).

  • Hydrocarbons monitoring

    Hydrocarbons are a family of organic chemicals consisting of carbon and hydrogen atoms arranged in a variety of ways. Hydrocarbons are found naturally in crude oil and are released into the environment with its combustion (power plants, home heaters etc).

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Water quality monitoring for dairy industry

    Continuous monitoring of process streams and waste streams in a dairy industry setting can provide various benefits to the operators. One major benefit is that it is possible to minimize product lost to the waste stream by means of reliable online monitoring of organics (TOC) at various points in the plant. In addition, due to the nitrogen deficient nature of milk wastes it is possible to optimize ammonia dosing by accurately and continuously monitoring the organic loads entering the waste stream.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you