Only show results available in Virginia? Ok

Total Petroleum Hydrocarbons (TPH) Monitoring Applications

  • Premium

    Determination of total petroleum hydrocarbons (TPH) in soil by fluorimetric method

    Introduction

    Total petroleum hydrocarbons (TPH) is a term used to describe a large family of several hundred chemical compounds that originally come from crude oil; the main and most specific part of these compounds are non-polar and slightly polar hydrocarbons of the aliphatic, aromatic, and alicyclic structure.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    ppm Measurement of Oil in Water for the Petrochemical Industry

    Measuring the oil content in water or soil is a specialty of Wilks Enterprise. InfraCal TOG/TPH Analyzers provide on-site ppm measurements to help ensure upstream or downstream wastewater complies with discharge permits to avoid potentially costly fines. There are over 3,000 InfraCal TOG/TPH Analyzers in operation today around the world measuring the oil and grease levels in produced water on drilling platforms, oil content in FRAC water, hydrocarbons in wastewater effluents from refineries, and TPH in soil at...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Oil in Water Analysis for Flowback or Produced Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    TPH in Soil Remediation

    InfraCal TOG/TPH Analyzers allow for TPH (Total Petroleum Hydrocarbons) in soil testing at remediation sites such as leaking underground storage tanks and produced water evaporation ponds. Site managers can avoid having costly soil remediation equipment sit idle while waiting for off-site lab results. Sampling requires a few simple steps that can be performed by non-technical personnel. The soil is mixed with the extraction solvent, shaken, filtered, and then presented to the InfraCal Analyzer for measurement....

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Mining Applications Testing TPH in Soil

    Testing contaminated soils on-site for total petroleum hydrocarbons (TPH) is performed to monitor the progress of bioremediation activities at mining sites. Results only take a few minutes.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Monitoring TPH in Produced Sand for Overboard Discharge

    Sitelab's TD-500D analyzer is used on offshore oil platforms to test TPH in produced sand. The sand is contaminated by crude oil and must be treated prior to overboard discharge in order to meet regulatory limits.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you