Total Petroleum Hydrocarbons (TPH) Monitoring Applications available in Sudan
-
Premium
Determination of total petroleum hydrocarbons (TPH) in water by fluorimetric method
Total petroleum hydrocarbons (TPH) is a term used to describe a large family of several hundred chemical compounds that originally come from crude oil; the main and most specific part of these compounds are non-polar and slightly polar hydrocarbons of the aliphatic, aromatic and alicyclic structure. These compounds are harmful to humans and animals if absorbed through the skin, ingested, and inhaled thus claiming the analytical control of THP content in water as a global issue. Quantification of TPH in water is ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
TPH in Soil Remediation
InfraCal TOG/TPH Analyzers allow for TPH (Total Petroleum Hydrocarbons) in soil testing at remediation sites such as leaking underground storage tanks and produced water evaporation ponds. Site managers can avoid having costly soil remediation equipment sit idle while waiting for off-site lab results. Sampling requires a few simple steps that can be performed by non-technical personnel. The soil is mixed with the extraction solvent, shaken, filtered, and then presented to the InfraCal Analyzer for measurement. ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
ppm Measurement of Oil in Water for the Petrochemical Industry
Measuring the oil content in water or soil is a specialty of Wilks Enterprise. InfraCal TOG/TPH Analyzers provide on-site ppm measurements to help ensure upstream or downstream wastewater complies with discharge permits to avoid potentially costly fines. There are over 3,000 InfraCal TOG/TPH Analyzers in operation today around the world measuring the oil and grease levels in produced water on drilling platforms, oil content in FRAC water, hydrocarbons in wastewater effluents from refineries, and TPH in soil at ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Determination of total petroleum hydrocarbons (TPH) in soil by fluorimetric method
Introduction: Total petroleum hydrocarbons (TPH) is a term used to describe a large family of several hundred chemical compounds that originally come from crude oil; the main and most specific part of these compounds are non-polar and slightly polar hydrocarbons of the aliphatic, aromatic, and alicyclic ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Machine condition monitoring for oil in water/soil
Overview Being able to trust your instruments to make quick, easy and accurate measurements in the field is key when dealing with regulatory requirements. The InfraCal2 infrared analyzer is the choice of experts for measuring oil in produced water; oil contamination in soil; and fats oil and greases in waste ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Measuring Fats, Oil and Grease (FOG) in Wastewater
It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oil and Grease (FOG). With significant growth in the commercial food sector on top of other high FOG producing industries such as metal processors, meat packers, cosmetic manufacturers and industrial laundry establishments, the need for publicly owned treatment plants (POTWs) and industries to regulate and monitor FOG is crucial to public health. Besides clogged sewer lines, high FOG levels also disrupt the effective operation of a ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Oil in Water Analysis for Flowback or Produced Water
The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that can ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
UVF-Trilogy Analyzer for TPH Oil & Grease Range Hydrocarbons
Sitelab's UVF-Trilogy analyzer, model no. 7200-004-TPH, includes TPHOIL UV module used to detect total petroleum hydrocarbons in the C15 to C50 "Oil and Grease" range. The analyzer is factory calibrated using Sitelab's TPH-Oil calibration kits for testing low and high concentrations of hydrocarbons in soil or water. This test matches well to U.S. EPA 1664, 9071B and similar gravimetric methods for oil in water, oil in soil applications. ...
By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).
-
Analytical laboratory solutions for petrochemical industry
Teledyne Tekmar is the laboratory's choice for the analysis of gasoline additives, sight evaluation to determine underground storage tank integrity, and oil profiling. The complex processes involved in the petrochemical industry result in the production and management of Volatile Organic Compounds (VOCs) and Total Organic Carbon. Teledyne Tekmar is there to make sure the measuring and monitoring of these compounds is indisputable, accurate and ...
By Teledyne Tekmar based in Mason, OHIO (USA).
-
Optimization of volatile petroleum hydrocarbons analysis by automated headspace using method development tools
This application note will outline the use of the SCION Instruments HT3 and MOM to develop a method for running VPH compounds by dynamic headspace. Because the HT3 is equipped with a dynamic trapping system (sweep) it is capable of detecting low ppb ...
By Scion Instruments - Techcomp Group based in Livingston, UNITED KINGDOM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you