Toxic Gas Monitoring Equipment For Monitoring And Testing In Colorado
-
Manufactured by AMETEK MOCONbased in USA
The Baseline 9000 Hydrocarbon Analyzer is a microprocessor-based instrument designed for continuous ambient or process hydrocarbon gas measurement in environmental or industrial settings. The analyzer can be purchased in a variety of configurations with internal components for single or multi-point sampling (with or without a sample pump) for pre-filtered non-condensing ...
-
Manufactured by Highvac Corporationbased in USA
The EcoGuard™ abatement system is an integration of a thermal pyrolytic / oxidizer, two-stage water absorber (scrubber) and gas cooler. It uses a liquid re-circulation pump and a holding tank with an auto top-off feature. The system is controlled and monitored by a PLC and touch panel interface module. It will run up to four process tools. Fuel-on-demand feature and flashback controller are ...
-
Manufactured by AMETEK MOCONbased in USA
The Baseline 9000 MNME uses a flame ionization detector (FID) in conjunction with an oxidation catalyst switched in and out of the sample stream. The catalyst oxidizes all hydrocarbons except methane to produce a methane only measurement. This catalytic reaction relies on the presence of oxygen (O2) in the sample. The methane value is then subtracted from the total hydrocarbon concentration to ...
-
Manufactured by Conspec Controls Limitedbased in CANADA
CONSPEC’s CX Series is an economical choice for toxic, combustible, and Oxygen gas monitoring. The CX Series is a simple and “smart” gas detector designed for use in hazardous or classified locations. An industry standard 4-20mA Analog output signal can be connected to any existing PLC, DCS, or EMS system. A simplified calibration procedure allows for a quick, non-intrusive, ...
-
Manufactured by AMETEK MOCONbased in USA
The Baseline® 9200 gas analyzer combines the selective detection of a gas chromatograph (GC) with another simultaneous GC application or with the continuous monitoring abilities of a total hydrocarbon analyzer (THA) in a single, compact, sensitive and stable instrument. Building on decades of experience, this instrument has been designed with key features to meet your application ...
-
Manufactured by AMETEK MOCONbased in USA
As one of the most widely used gas detection techniques, the Photoionization Detector (PID), is commonly applied in both portable and fixed instruments for detection of a wide variety of organic compounds and some inorganic gases in ambient air. MOCON’s patented, award-winning piD-TECH eVx plug-in sensor provides complete photoionization detection capabilities and is designed to be ...
-
Manufactured by AMETEK MOCONbased in USA
The Baseline 9100 on-line gas chromatograph blends state-of-the-art technology with the reliability and flexibility of gas chromatography. Building on decades of experience, this instrument has been designed with key features to meet your application requirements. The GC is specifically designed for sub-part-per billion (sub-ppb) to percent level detection, dependent upon the application, to ...
-
Manufactured by Conspec Controls Limitedbased in CANADA
CONSPEC’s CN Series is an economical choice for toxic, combustible, and Oxygen gas monitoring. The CN Series is a simple and “smart” gas detector. An industry standard 4-20mA Analog output signal can be connected to any existing PLC, DCS, or EMS system. A simplified calibration procedure allows for a quick, non-intrusive, adjustment free ...
-
Manufactured by Conspec Controls Limitedbased in CANADA
CONSPEC’s Single Channel Controllers are single point monitoring and control processors, which are housed in a NEMA 4-4X weatherproof non-metallic enclosure and are designed to monitor and display any voltage or current input signal from any instrument, including CONSPEC’s EZ-CAL Toxic and Combustible Gas Sensors. The Series P2065 provides state-of-the-art versatility in monitoring of ...
-
Manufactured by Conspec Controls Limitedbased in CANADA
CONSPEC’s Single Channel Controllers are single point monitoring and control processors, which are housed in a NEMA 4-4X weatherproof non-metallic enclosure and are designed to monitor and display any voltage or current input signal from any instrument, including CONSPEC’s EZ-CAL Toxic and Combustible Gas Sensors. The Series P2065-D provides state-of-the-art versatility in monitoring ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
Compact, reliable and easy-to-use, the ToxiRAE Pro doesn’t get in the way of workers doing their job and provides unmistakable five-way local and remote alarms if a threat is detected or a man is down. Plus, it offers the flexibility of easily swappable sensors to monitor for different gases in different situations. This personal, wireless monitor for toxic gases and oxygen keeps workers ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
Deploy a fixed MeshGuard wireless gas-monitoring network quickly with this complete, turnkey solution. The MeshGuard RDK includes a controller and your choice of a combination of toxic and combustibles gas monitors. This kit provides a complete self-forming, self-healing gas detection network system. Certified for Class I, Division 1 environments, the MeshGuard RDK comes in a ruggedized, ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
This industry-leading wireless device monitors both chemical threats and gamma radiation and is the only multi-threat monitor with parts per billion precision. With the ability to wirelessly transmit threat and alarm data in real time to a central command station, the MultiRAE Pro offers improved visibility and awareness. It also gives you the flexibility to swap out 25 different sensors for a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you