Only show results available in Virginia? Ok

Toxicity Monitoring Applications

  • Premium

    Early Warning Systems for Waste water industry

    Physico-chemical parameters alone are not sufficient in obtaining reliable information on treated wastewater. Online toxicity monitoring must be performed in combination with routine chemical analysis. The assessment of biological effects of wastewater discharges in the ecosystems is today considered relevant and ecotoxicological tests identifying the ecological hazard are useful tools for the identification of environmental impacts.

    By microLAN B.V. based in Waalwijk, NETHERLANDS.

  • Premium

    Waste water treatment plants Personnel Safety & H2S filter management

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. As a result of the confinement of the waste water stations, toxic components such as H2S and Methylmercaptan increased. Safety of employees on such working sites has therefore become of major problem. To fight this hazardous pollution, air filtering systems have been installed. For the station managers, personal safety coupled with the need for constant air quality control and filter change has been a heavy task.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Waste water treatment plants Screening area: stripping

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. To ensure the safety of operatives in the screening building/area of waste water treatment works an H2S analyzer has been installed in the main building to complement the protection provided by individual monitors. Chromatographic measurements show that other sulfurous compounds including Methylmercaptans are present in the air in addition to H2S.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    PTR-MS systems for security and safety purpose

    Illicit substances real-time detection with IONICON PTR-MS. PTR-MS combines all features that are needed for analyzing dangerous and illicit substances like explosives, chemical warfare agents (CWA), toxic industrial chemicals (TIC) and drugs.

    By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.

  • Premium

    Seawater Biotoxicity monitoring to protect the coastal waters of Italy

    The recorded death of fish in the river that flows out of the industrial zone of Scarlino has created the need of the installation of a biological alarm system. The decision was made to work with an automatic system, iTOXcontrol created by microLAN-The Netherlands represented in Italy by Ecotox Lds, which uses marine bacteria. The system compares the values of the light emission from these organisms at the entrance and exit of the canal, generating alarms in the presence of toxic substances.

    By microLAN B.V. based in Waalwijk, NETHERLANDS.

  • Premium

    Oxygen monitoring from aerobic and anaerobic for toxicity test

    Toxicity of pure chemicals is assessed using respirometers by adding increasing concentrations to an active culture. The concentration at which oxygen uptake or gas production begins to decrease is known as the “threshold toxicant concentration.”

    By Respirometer Systems and Applications, LLC based in Springdale, ARKANSAS (USA).

  • Premium

    Environmental testing & compliance screening for energy/environmental sector

    Compliance screening and testing is often carried out during the manufacturing phase of a product, and all the way through its disposal or recycling process. It ensures that products and materials meet specific standards or comply with international and local directives or regulations. These standards and regulations are introduced to ensure the quality and safety of a product, and to minimise or eliminate its negative impact on the environment and people. Examples of products or materials tested are: electrical and electronic equipment (for compliance with the Restriction of Hazardous Substances (RoHS) directive), waste oils, soil (soil remediation depending on contents of toxic metals), children’s products (for compliance with Consumer Product Safety Improvement Act of 2008), etc.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Green chemistry scoring

    Through GreenWERCS, manufacturers can now drive greener formulations. GreenWERCS analyzes the composition of individual products using ingredient data to examine its potential impact on human health and the environment. It can utilize multiple and configurable pre-identified scoring and weighting algorithms to provide information on the chemical ingredients of the products and indicate whether or not they include:

    By UL The WERCS based in Latham, NEW YORK (USA).

  • Premium

    EDXRF spectrometers for forensics industry

    Fingerprinting all kinds of materials analyzed in forensic analysis

    Forensic scientists generally require fast and non-destructive analysis of a very wide range of materials. Often these materials are presented in very small quantity, as evidence collected from a crime scene. Using ED-XRF allows to measure a wide range of elements and concentrations: C(6)-Fm(100), without any need of sample preparations. Samples can be measured in many different formats such as powder, solid, liquid or in thin films.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • Premium

    Water Treatment Solutions for Arsenic Removal

    Compliance with the USEPA’s new maximum contaminant level (MCL) of 10 parts per billion (ppb) for arsenic affects thousands of small public water systems in the U.S. Among treatment options available, few are simple, proven, affordable, and reliable. AdEdge offers a line of packaged, pre-engineered drinking water treatment systems which are ideal for small public water systems such as schools, mobile home parks, shopping centers, subdivisions, and more.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Premium

    Online Monitoring for the Drinking Water Industry

    AppliTek manufactures wet-chemical analyzers specifically designed for measuring on a continuous base the quality indices of drinking water, from raw water intake up to distribution level. Our systems have a small footprint, reduced reagent consumption and show excellent levels of detection in compliance with modern standards.

    On top of that, the delivery of safe water throughout the water cycle will raise the need for efficient monitoring systems detecting in real-time contaminations. `Broadband toxicity`, a non-specific parameter defined by AppliTek, is a prodigiously new and clean technology for safeguarding drinking water.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Mercury monitoring for on-site remediation

    Fugitive emissions can be a health concern during removal and disposal of mercury-contaminated material at remediation sites. Thus, remediation projects either indoors or outdoors often require on-site, real-time mercury air monitoring with a Tekran 2537. This assures permitted levels are not exceeded during waste processing and human exposure levels are below government regulated toxicity thresholds. Often multiple sites must be monitored continuously. The Tekran 1115 Multi-Port Sampler is the ideal tool for multiplexing the Tekran 2537 for real-time continuous on-site monitoring of mercury fugitive emissions.

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).

  • Premium

    Precision moisture analysis instruments for mercury detection for first responders

    Working on a hazardous materials team means being prepared for the unexpected, from toxic chemicals to unidentified powders to overturned trucks. Should “the unexpected” ever include mercury and mercury vapor contamination incident response, trust Jerome mercury vapor analyzers to keep your team and your community safe.

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • Premium

    Precision moisture analysis instruments for rapid solids testing for pulp and paper

    Durable, reliable analysis for black liquor. Black liquor is a difficult substance to work with. It’s caustic, it’s toxic, and it emits poisonous gases such as hydrogen sulfide. But the efficient use of black liquor is critical to the profitable operation of any pulp and paper mill. In order to use black liquor efficiently, you need to test it for solids. Make sure your solids analyzer is up to the task.

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • Premium

    Gas Detection for the Gas Industry for the Indoor Air Industry

    Sewerin manufacture a wide range of gas warning detectors suitable for many different gas monitoring, detection and warning applications.
    Sewerin gas detectors are used to monitor and warn of the dangers from explosive, toxic and asphyxiating gases.

    By Hermann Sewerin GmbH based in Gütersloh, GERMANY.

  • Premium

    Waste Water

    Waste water, especially industrial waste water, is the most challenging water for instrumentation. Mostly, this water is characterized by highly fluctuating loads, very high salt concentrations as well as a high particle density. Hence, the accurancy and speed of measurements depends on the measurement system itself and the oxidation technique used. Obviously, application-specific analyzers provide huge advantages against standard analyzers that are used for all applications.

    By LAR Process Analysers AG based in Berlin, GERMANY.

  • Smoke generator device for oil mist generation

    Concept’s OMG is used by many of the worlds leading specialists in Oil Mist Detection including Specs, Dr Horn , Honeywell, Kidde, Valcom, Daihatsu, Schaller and Kwangsan.

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Pesticide and toxin screening for the food industry

    The number of pesticides and other potentially dangerous toxins is increasing constantly, posing special analytical challenges. It is crucial to screen food for the presence of toxins accurately and reliably, and to ensure the safety and quality of nutrition. To do so, we have to have the knowledge about how to deal with several hundreds of different poisonous matters. Bruker delivers solutions that meet the requirements for the identification and quantification of toxicants during the screening of each sample. Bruker’s high-performance TOF-MS is ideally suited for all screening tasks. And Bruker’s SCION series sets a new industry standard for GC-MS. Their easy usability, sensitivisty, robustness and performance make SCION solutions a major technology in food safety.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Industrial dedusting

    The industrial dedusting field is very varied and branches out in numerous specialized branches. For a preliminary examination of the problem it is necessary to dispose of two series of data: characteristics of the system which emits the pollutants; nature of pollutants and their characteristics.

    By GGE srl based in Rio Saliceto, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you