Toxicity Sampling (Toxicity Monitoring) Equipment
-
based in USA
Dual channel compatibility allows the R-3557-P to monitor one or two low cost, disposable Delrin sensors that can be easily replaced by the user. The “ECHEM” channel supports any of the 20+ toxic sensors, and the “BRIDGE” channel accepts inputs from SmartIR infrared LEL and CO2 sensors as well as the ...
-
Manufactured by Shang Hai WHB Biotech Co,.Ltdbased in CHINA
release agents, plasticizers and bacteriostats, does not contain any heavy metal ions 8.High centrifugal stability, centrifugal endurance of up to 20000xg. When dealing with toxic samples, the staff and work environment to provide security 9.Temperature tolerance: -80 ºC to + 121 ºC temperature range, no deformation. 10.Selection of ...
-
Manufactured by Aboatox Oybased in FINLAND
21338) is comparable to any other method with the same organism. From toxic samples the results are available in minutes but if you need to know that the sample is non toxic, you must waith as in any other test! For instructional video please contact Aboatox. It is possible to measure the result from the control ...
-
Manufactured by IKA-Werke GmbH & Co. KGbased in GERMANY
The new IKA UTTD power control disperser gets its name from an even more powerful motor. The disperser assures the best stirring, dispersing, grinding and homogenisation results and has been devised in particular for the safe processing of infectious, toxic or odour-intensive ...
-
Manufactured by IKA-Werke GmbH & Co. KGbased in GERMANY
The new IKA UTTD power control disperser gets its name from an even more powerful motor. The disperser assures the best stirring, dispersing, grinding and homogenisation results and has been devised in particular for the safe processing of infectious, toxic or odour-intensive ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis. For emission and process monitoring. For adaption of the sample gas concentration to the measuring range of the analyser. For dilution of toxic sample gas below the maximum allowable concentration (MAC). For dilution of the water vapour concentration in the sample gas to a low dew point. ...
-
Manufactured by Environmental Bio-Detection Products Inc. (EBPI)based in CANADA
A microplate toxicity bioassay to determine acute and chronic toxicity in water, effluents, and other liquids.The Toxi-ChromoTestTM procedure exposes the bacteria to the toxicants in the sample for a short (90-minute) incubation period. After the incubation period, a chromogenic substrate is added. If the sample ...
-
Manufactured by Aboatox Oybased in FINLAND
The BioTox Kit is used for the determination of toxicity of water soluble samples. The inhibitory effect of the sample on the light emission of luminescent bacteria, Aliivibrio fischeri (formerly Vibrio fischeri), is measured with a luminometer. The BioTox Kit provides a rapid, easy to use method for measuring toxicity of aqueous ...
-
Manufactured by Assured Bio Labs, LLCbased in USA
certified. This test identifies molds that are highly correlated with water damage, high moisture levels, and toxic molds. Sampling is easy – simply select a room, find some undisturbed dust, and swab it. Then place the samples in the provided mailer and drop in the mailbox. Once received by the lab, you will receive an email in less than ...
-
Manufactured by Changsha Yong Le Kang Co., Ltd.based in CHINA
The Automatic Rotary Agitators are sample agitation devices developed for use during the Extraction Procedure, Toxicity Characteristic Leaching Procedure (TCLP) US EPA Method 1311 and the Synthetic Precipitation Leaching Procedure (SPL). Widely applied in the related industry of solid waste toxicity identification, sample ...
-
Manufactured by Aboatox Oybased in FINLAND
This method employs a novel, patent pending sampling and test device called the LumoStix™ to rapidly screen samples for toxicity in the field. Swabs at each end of the device provide both a sampling and test location and the prepared BioTox™ reagent is employed to assess toxicity using a portable ...
-
Manufactured by Changsha Yong Le Kang Co., Ltd.based in CHINA
The Plate Type Rotary Agitators are sample agitation devices developed for use during the Extraction Procedure, Toxicity Characteristic Leaching Procedure (TCLP) US EPA Method 1311 and the Synthetic Precipitation Leaching Procedure (SPL). Widely applied in the related industry of solid waste toxicity identification, sample ...
-
Manufactured by SYSTEA S.p.A.based in ITALY
State-of-the-art Direct Read Discrete routine laboratory Analyzer for automated determination of acute toxicity in water samples based on bioluminescent bacteria, up to 30 tests per hour throughput. ...
-
based in USA
Municipal waste water treatment facilities and government agencies are increasingly concerned with the existence of bacteria, viruses and emerging contaminants such as hormones and pharmaceuticals in drinking water. To effectively concentrate these toxic constituents during sampling and rapidly remove them, WRI has developed a ...
-
Manufactured by Mechatest Sampling Solutionsbased in NETHERLANDS
for emission free sampling of toxic, dangerous or volatile liquids. For Spot Grab Sampling of Hydrocarbons liquids, closed sampling, On-Off Liquid Bottle Sampler, Bypass Sampler, Back Purge Sampler, Needle Purge sampler, Flow Thru Inline Sampler, Piston Valve Liquid Sampler and GC Vial Sampler ...
-
Manufactured by Mechatest Sampling Solutionsbased in NETHERLANDS
Mechatest design liquid sampling systems for spot liquid sampling, suitable to take spot samples of liquids under vacuum, atmospheric circumstances, low or high pressure. This typical “needle” bottle sampler for liquids is closed loop and suitable for emission free sampling of toxic, dangerous or ...
-
Manufactured by PIKE Technologiesbased in USA
The PIKE MIRacle is a universal ATR sampling accessory for analysis of solids, liquids, pastes, gels, and intractable materials. In its most popular configuration, it is a single reflection ATR accessory with high IR throughput which makes it ideal for sample identification and QA/QC applications. Easily changeable crystal plate design ...
-
Manufactured by Exposmeter ABbased in SWEDEN
EWL15-Tox with canister samplers characteristics are the same as EWL15-Tox with exception that the membrane is delivered mounted on spider and placed in the aliumina canister. Aliumina canister for EWL15 with canister series samplers. Dimensions: 9cm x 3cm x 3 ...
-
Manufactured by SYSTEA S.p.A.based in ITALY
As a result of years of intensive research and development activities, EASYCHEM TOX Early Warning is an original direct reading on-line analyzer based on discrete analysis technology, for fully automated toxicity measurements of water samples using live cultures of luminescent bacteria. EASYCHEM TOX Early Warning is a on-line automated ...
-
Manufactured by ATECbased in USA
The Model 3400 Toxic Air Sampler is designed to sample both toxic gases and particulates using one easy to use instrument. The Model 3400 can be ordered with up to 4 sample channels. The sample is ideally suited for use in the NATTS program, since it can simultaneously sample one canister, one ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you