Only show results available in Virginia? Ok

trace metal removal Equipment

  • Modern Water - Model UVI 4000 - Bench Top UV Digester

    Modern Water’s UVI 4000 digester is ideal for aqueous samples with slight to medium contamination from organic material. The unit provides a quick and easy way to remove this interference to achieve more accurate sample analysis. The UVI 4000 is a compact, bench-top device which needs no special set-up or protective arrangements to use.

    By Modern Water - Monitoring Division based in Cambridge, UNITED KINGDOM. from Trace Metal Monitoring Product line

  • Model OVA 7000 Dual Cell - On-line Metal Monitor

    Measuring trace metals in water, soil and food has always been a vital part of modern environmental monitoring. Voltammetry offers an internationally accepted alternative to laboratory analysis or automatic samplers. Modern Water’s range of OVA products are cost effective, accurate, simple to use and easy to integrate into existing systems.

    By Modern Water - Monitoring Division based in Cambridge, UNITED KINGDOM. from Trace Metal Monitoring Product line

  • Model PDV 6000 Ultra - Portable Metal Monitor

    Measuring trace metals in water, soil and food has always been a vital part of modern environmental monitoring. Voltammetry offers an internationally accepted alternative to laboratory analysis. Modern Water’s PDV provides better on-site characterisation, with pollution hot spots and contamination sources more easily identified.

    By Modern Water - Monitoring Division based in Cambridge, UNITED KINGDOM. from Trace Metal Monitoring Product line

  • SmartBlock - Model 125 - Trace Metals Disgestion Block

    The SmartBlock 125 is a trace metals disgestion block which can digest 56 water, wastewater, TCLP digestion extracts, soils and other sample types. Two transport racks are included which can quickly and safely insert and remove the 50-ml centrifuge tubes which serve as digestion containers. Two sizes are available, 56- and 28-position SmartBlocks ...

    By Columbia Analytical Instruments Inc. based in Irmo, SOUTH CAROLINA (USA).

  • Metals Removal Systems

    Industries are under increasing pressure from water quality regulators to clean up dissolved metals, nitrate and other inorganic contaminants. Waste streams and water bodies with even trace amounts of certain inorganic compounds are attracting more and more attention of the public and of government agencies.

    By Plymouth Technology, Inc. based in Rochester Hills, MICHIGAN (USA). from Equipment Product line

  • Model METL-X - Heavy Metal Removal System

    Most metal finishing operations still use some form of metal hydroxide precipitation with one or more polymers, coagulants, etc. to remove metal ions to acceptable levels.  The primary problem with this method is that ions of different metals precipitate at different pH levels.  So, if you have more than one regulated metal you have to ...

    By CleanEarth Corporation based in Gallatin, TENNESSEE (USA).

  • SMART SPONGE - Model HM - Heavy Metal Removal Technology

    Many industrial plants have new tighter wastewater regulations being imposed.  This can be observed with lower acceptable levels of phosphorus and heavy metals to which a plant can send to a POTW or to surface discharge under a NPDES permit.  AbTech’s Smart Sponge HM (heavy metals) technology is an excellent phosphorus and metals ...

    By AbTech Industries Inc based in Scottsdale, ARIZONA (USA).

  • Model 433-A - Polarographic Trace Analyser

    Trace analysis have never been important than today where detection of heavy metals and other pollutant compounds requires a continuos surveillance in many samples like water, food, beverages etc. For the first time a high performance static mercury drop electrode and a COMPLETE COMPUTERISED TRACE ANALYSER have been put together in a single, ...

    By Amel Srl based in Milano, ITALY. from Analysis Product line

  • GISCO - Model TW-6 - Pipe And Cable Locator

    The Model TW-6 'Two-Box' metal-detector finds underground pipes, cables, manhole covers, vaults, valve boxes and other metallic objects. Like earlier models, the TW-6 is used primarily by water departments, telephone companies, power companies, gas companies and petroleum pipe line companies when making repairs and rearranging lines.

  • Premium

    Ahlstrom Disruptor - Water Filtration

    Ahlstrom Disruptor is an electrodsorptive technology for water purification and filtration. Disruptor filter media removes a wide range of submicron particulates, pathogens, trace pharmaceuticals and cellular debris with its naturally occurring electropositive charge. Disruptor is specifically engineered to have this charge field cover the entire ...

    By Ahlstrom Corporation based in Helsinki, FINLAND. from Energy and Environment Product line

  • Model 60 1 GPM or 1,440 GPD - Liquid Separation System

    Liquid/Liquid Separation removes free oils, most emulsified oils, complex heavy metals, PCB laden oil, trace BTEX, suspended solids. Reduces BOD, COD and many other contaminants.

    By Environmental Process Systems Inc. (EPSI) based in Willow Spring, NORTH CAROLINA (USA). from Liquid/Liquid Separation Product line

  • Dry Scrubbing

    In 'dry scrubbing' a solid sorbent is injected into the gas stream which reacts with the contaminant and is removed on a filter, together with any other particulates. This produces a dry powder for disposal. Alkalis such as lime or sodium bicarbonate are injected for the removal of acid gases such as sulphur dioxide and hydrogen chloride. Powdered ...

    By ACWA Services Ltd based in Skipton, UNITED KINGDOM. from Air Product line

  • Commercial Water Softeners

    The Water Softening process is primarily designed to remove calcium ions from the water. The calcium in the water causes scale in water heaters and plumbing, develops soap scum and creates unwanted precipitates. The resin that is used for this process will also remove magnesium, ferrous (clear) iron, and traces of metals such as copper, aluminum, ...

    By Clarity Water Products based in Vista, CALIFORNIA (USA).

  • FumeGard - Model NU-156 - Vertical Laminar Airflow Fume Hood

    The FumeGard 156 Vertical Laminar Airflow Fume Hood for high acid and trace metal analysis meets NSF / ANSI Standards for personnel, product, and environmental protection through HEPA filtration. Durable polypropylene construction is rust resistant.

    By NuAire, Inc. based in Plymouth, MINNESOTA (USA). from Polypropylene Laboratory Equipment Product line

  • Decationizer - Model DMP CES Series - Sub / ION Exchange System

    The DMP CES Series Decationizer is a sub-system for treating wastewater. The system consists of vertical columns of ion exchange resin through which the prepared wastewater is pumped. The sole function of the Decationizer is to extract from water the trace metals Ions controlled by environmental guidelines. The CES Series Decationizer can be ...

    By DMP Corporation based in Rock Hill,, SOUTH CAROLINA (USA). from Other Products Product line

  • MicroMist - Scrubbers

    Developed and applied by experienced process engineers, the EnviroCare MicroMist Scrubber was specifically designed to collect sub-micron particulate at very high efficiencies with low energy input. It removes condensables, such as trace metals, while reducing liquid effluent waste streams. EnviroCare's MicroMist Scrubber is the logical choice ...

    By Envirocare International, Inc. based in American Canyon, CALIFORNIA (USA). from Scrubbers Product line

  • Model BX-700 - Compact Geochemical Box Corer for Marine Geological Sampling

    The BX-700AL Compact Geochemical Box Corer is a modification on an original design developed by Andy Soutar of Scripps Institution of Oceanography, La Jolla, California that has been extensively used in organic carbon, texture and trace metals research since the mid 1970′s. A number of unique modifications and changes have been in the design ...

    By Ocean Instruments, Inc. based in San Diego, CALIFORNIA (USA). from Box Corers Product line

  • OdaLock - Model WP-1 Plus - Buffered Mineral Adsorption Technology

    WP-1™ PLUS is a convenient and innovative water and soil amendment specifically formulated for phosphorus and trace element e.g. Zn, Cu, Cd, Cr, Fe etc. removal and water clarification in a variety of natural aquatic systems e.g. ponds, lakes, reservoirs, lagoons, rivers, estuaries, dams, ornamental ponds and natural wetlands.

    By Applied Remediation, llc based in Sioux Falls, SOUTH DAKOTA (USA).

  • Model ERI - Ferrous Sulfate and Ferrous Chloride

    ERI contains a blend of ferrous sulfate or ferrous chloride with micronutrients, vitamins, minerals, trace elements, & small amounts of catalytic cofactors. These ingredients work together as catalytic cofactors to increase the rate of enzymatic reactions within a system.

    By BioCOPE Inc. based in Canyon, TEXAS (USA).

  • Premium

    AQUOX - Potassium Permanganate

    AQUOX® Potassium Permanganate, offered only in Europe, Middle East and Africa, brand of potassium permanganate, is a versatile oxidant used to treat drinking water, wastewater, industrial process chemicals, plus numerous other applications.

    By Carus Corporation based in Peru, ILLINOIS (USA). from Water Treatment Products Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you