Trace Oxygen Monitoring Equipment For Monitoring And Testing Available In Indiana
-
PremiumManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model ZR1000 is a trace oxygen analyzer used for the measurement of trace oxygen in all types of inert environments. The ultra-fast zirconia sensor will respond from 1000 to 10 ppm in about 23 seconds, as opposed to other instruments which may take minutes to reach 10ppm. This unit is powered by an AC to 12Vdc power supply/adapter, or an optional Ni-MH rechargeable battery pack, with ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
IMR 6400 High Temp intelligent oxygen analyzer uses an advanced anti-interference circuit and an anti-volatile data protection function. The display will automatically switch to any range for the set limit concentration on the ...
-
Manufactured by PyroScience GmbHbased in GERMANY
Oxygen sensor spots allow oxygen measurements in closed sample containers with contactless read-out through a transparent window (glass, acryl glass) with special adapters and optical fibers for all types of fiber-optic meters from PyroScience. This enables incubations in closed systems, preventing potential contamination and simplifying oxygen monitoring without sampling, also in combination ...
-
Manufactured by Advanced Micro Instruments, Inc. (AMI)based in USA
The MODEL 2001RS and 2001RSP are advanced Trace Oxygen Analyzers loaded with a full suite of standard features. The Analyzers’ compact design includes AMI’s patented ELIMINATOR CELL BLOCK™ technology, incorporating a complete sample system, and combines it with our industry-leading trace O2 sensors. This combination delivers accurate, reliable and extremely fast response times ...
-
Distributed by Air Sampling Devicesbased in USA
This trace oxygen analyzer is capable of sampling ambient air and measuring the oxygen content. Sampling rate is between 1 and 3 liters per hour. Operating temperature range of 0 to 55 degrees centigrade. Humidity range 5% to ...
-
Manufactured by PyroScience GmbHbased in GERMANY
Oxygen sensor spots allow oxygen measurements in closed sample containers with contactless read-out through a transparent window (glass, acryl glass) with special adapters and optical fibers for all types of fiber-optic meters from PyroScience. This enables incubations in closed systems, preventing potential contamination and simplifying oxygen monitoring without sampling, also in combination ...
-
Manufactured by Southland Sensing Ltdbased in USA
The OMD-677 is designed to measure trace oxygen in the sub 1 ppm region. The unit combines an advanced set of electronic features with our, industry-leading, precision electrochemical oxygen sensor technology. The result is a highly reliable and cost-effective design with easy-to-use user ...
-
Manufactured by PyroScience GmbHbased in GERMANY
The flow-through cells have an integrated oxygen sensor for contactless oxygen measurements of gaseous or aqueous liquid samples flowing through the cell. The cell is equipped with Luer-lock connectors on both tubing ends. The included set of Luer-lock adapters allows direct connection of tubings with ca. 3-4 mm inner diameter. With an optical fiber the flow-through cell is connected to an ...
-
Manufactured by Knick Elektronische Messgeräte GmbH & Co. KGbased in GERMANY
Reliable measurement of oxygen traces also under sterile and hygienic conditions; signal-stable and robust. ...
-
Manufactured by PyroScience GmbHbased in GERMANY
PyroScience stands for intriguing optical sensor technology: simple, compact & flexible sensor systems with expert customer support. With the new AquapHOx technology, we also offer a unique all-in-one flexible underwater solution to monitor the health of our oceans. The AquapHOx-LX is a flexible multi-analyte long-term logger for stand-alone underwater operation down to 4000m water depth. It ...
-
based in USA
A panel mounted oxygen analyser with a remote sensor allows flexibility of installation. The GPR-1900 gas analyzer is suitable for trace oxygen measurements as low as 0-1 ppm; the GPR-2900 measures O2 up to 100%. The remote sensor block allows a very easy oxygen sensor replacement for simple and fast maintenance and low cost of ownership. All versions can be locked manually to a single range or ...
-
Manufactured by Teledyne Analytical Instrumentsbased in USA
FM approved intrinsically safe for use in Class I, Division 1, Groups B, C, and D.Analysis of oxygen has become a part of every industry that uses or produces gas or gas mixtures. Teledyne’s complete line of portable gas analyzers provides this vital analysis in a compact package operating without an external power ...
-
Manufactured by PyroScience GmbHbased in GERMANY
The flow-through cells have an integrated oxygen sensor for contactless oxygen measurements of gaseous or aqueous liquid samples pumped through the cell. The cell is equipped with Luer-lock connectors on both tubing ends. The included set of Luer-lock adapters allows direct connection of tubings with ca. 1-2 mm inner diameter. With an optical fiber the flow-through cell is connected to an optical ...
-
Manufactured by Advanced Micro Instruments, Inc. (AMI)based in USA
AMI has developed a Class 1, Div. II Group C,D Sample Pump Module suitable for a wide range of previously impossible applications. Our high quality pump uses a unique diaphragm that diffuses less than 0.5ppm of oxygen while drawing from pressures as low as 14”Hg. It pushes the sample gas through the trace oxygen analyzer allowing the sensor to operate at atmospheric pressure. ...
-
Manufactured by Clariant International Ltd.based in GERMANY
Clariant’s EnviCat catalysts and Actisorb adsorbents address the high quality demands of technical gases, reducing the level of substances such as hydrocarbons, hydrogen, oxygen, carbon monoxide or sulphur compounds to minimal levels of a few ppm or even ppb. Building on decades of research and practical application, Clariant has developed products providing mechanical stability and ...
-
Manufactured by Dikma Technologies Inc.based in USA
DM-5MS / LB (low bleed) column is coated with a 5% diphenyl / 95% phenyl arylene dimethyl polysiloxane phase, which can inhibit the formation of ring-shaped fragments of siloxane skeleton, thereby reducing column bleed and increasing the thermal stabilty. The stationary phase has better stability; and will not exhibit oxidative degradation when there is trace oxygen in the carrier ...
-
Manufactured by Dalian Haixin Chemical Co., Ltd.based in CHINA
HC-6 deoxidizing agent is used to remove oxygen from propylene for propylene polymerization. It is also used to deeply remove trace oxygen form non-acidic gas. Characteristics:high adsorption capacity, high crush ...
-
Manufactured by SWAN Analytische Instrumente AGbased in SWITZERLAND
High precision monitor with three electrode Oxytrace G sensor for the continuous measurement of trace levels of dissolved oxygen in high purity ...
-
Manufactured by Sheldon Manufacturing Incbased in USA
Model BACTRON300, 17.6 Cu.Ft. (498 L) Anaerobic Chamber, 300 Plate Capacity. An economical anaerobic environment system with air lock, a 17.6 cu.ft. workspace and a 300 plate capacity incubator allows the BACTRON300 to deliver optimum productivity in a compact space. The operator has total command of the work area, yet enjoys ample bench space for efficient performance of all procedures requiring ...
-
Manufactured by Teledyne Analytical Instrumentsbased in USA
FM/FMc or ATEX approved intrinsically safe for use in Class I, Division 1, Groups A-D and Zone 0 areas . Analysis of oxygen has become a part of every industry that uses or produces gas or gas mixtures. Teledyne's complete line of portable gas analyzers provides this vital analysis in a compact package operating without an external power source. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you