Only show results in Virginia? Ok

Tritium Monitoring Applications

  • Premium

    Power Generation

    MEGTEC is actively involved in providing Power Generation solutions for many applications ranging from utilizing process heat recovery systems to utilization with boilers, to recovering and utilizing Ventilation Air Methane (VAM) from coal mines. MEGTEC has developed VAM processing technologies for either abatement only and in combination with energy recovery and utilization. MEGTEC’s proven technologies are destroying methane while generating high quality carbon credits, electricity for coal mines and heating...

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Formaldehyde and Acetaldehyde Determination in Air Using Fully Automated On-Line Desorption and Analysis of DNPH Cartridges

    Airborne aldehydes and ketones are collected by passing air through a cartridge containing 2,4-dinitrophenylhydrazine (DNPH). Carbonyl compounds react with the DNPH to form hydrazones, which are immobilized on the cartridge. These compounds can be easily eluted from the cartridge with acetonitrile and analyzed by HPLC with UV detection. Traditionally, this analysis including the workup contains a series of manual steps, which can become time-consuming and could incur experimental error. Automating the extraction...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Composites and Carbon Fiber

    For Thermoplastic Composites customers MEGTEC offer process development in our R&D Center, customized roll-to-roll lines for R&D or production, in addition to our environmental compliance solutions. MEGTEC supports the development of new thermoplastic materials by providing customers a flexible pilot line for initial tests and process definition. Once a process is defined, MEGTEC will design and build the production line to meet the unique process.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Capabilities of the Adsorbent Tube Injector System (ATIS™)

    The Adsorbent Tube Injector System (ATIS) was developed at Supelco® by R&D Scientists, as a tool to assist in our comprehensive adsorbent research for thermal desorption tubes. The ATIS provides an efficient means of transferring calibration standards in either the gas or liquid phase onto the adsorbent packed tubes. The ATIS employs the technique of flash vaporization to vaporize the sample in a continuous flow of inert gas; the inert gas carries the sample to the tube. The sample pathway of the ATIS is construct...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Industrial Weighing - In Motion Weighing

    METTLER TOLEDO`s Garvens and Hi-Speed companies offer many in-line dynamic checkweighing solutions for homogenius packages which are processed at very high rates of speed. However, many of our customers weigh heavier mixed goods such as, post or freight, at slower speeds.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    radiello™ Passive Sampler as a Tool for the Measurement of Atmospheric Ammonia Concentrations and Dry Deposition

    The radiello ammonia sampler impregnated with phosphoric acid represents a low-cost, reliable and simple tool for assessing the atmospheric deposition of ammonia at parts per billion (ppb) concentration levels.

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Cement

    MEGTEC's extensive scrubber experience applies to the cement manufacturing process for the effective control of SO2 and HCl by the injection of lime slurry. Our customers can achieve up to 90% reduction of SO2 and 98% reduction of HCl using microfine or standard lime. The TurboSorb Spray Dryer Absorber (SDA) can often retrofit into an existing gas conditioning tower, or downcomer duct, to avoid the high cost of new capital equipment.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Special orders for air purification equipment

    We are able to offer custom solutions for air purification and odor control. We can design new equipment for special orders or offer branding for existing equipment.

    By International Ozone Technologies Group, Inc. based in Delray Beach, FLORIDA (USA).

  • Premium

    Odor Eliminator

    Titan Hydroxyl Generators and Total Zone Ozone Generators are used to eliminate odors.

    By International Ozone Technologies Group, Inc. based in Delray Beach, FLORIDA (USA).

  • Premium

    Baseline® 9100 Residual Solvent Analysis — Ethanol, Isopropanol, and Acetone

    MOCON’s Baseline® Series 9100 Gas Chromatograph equipped with a photoionization detector (PID) provides a quick, cost effective quantitative analysis of IPA and acetone in air at levels in the ppb and sub-ppb range with no preconcentration necessary. Isopropanol and acetone are detected and accurately quantified to sub-ppb levels in under 3 minutes with ethanol producing no interference. The instrument is sensitive to below 5 ppb for both IPA and acetone employing the MOCON Baseline® standard PID or 0.1 ppb...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Air combustion for chemical plants

    By AEREON based in Austin, TEXAS (USA).

  • Premium

    Cigarette Smoke Odor Control

    Total Zone Ozone Generators and Titan Hydroxyl Generators will eliminate odors associated with cigarette smoke in homes, businesses, warehouses, cars, hotels, and restaurants.

    By International Ozone Technologies Group, Inc. based in Delray Beach, FLORIDA (USA).

  • Premium

    Compressed air & gas solutions for vacuum technology

    Whether in foodstuff or pharmaceutical industry, in the chemistry or process engineering, metall processing or in automotive industry: in many branches of industry most different manufacturing processes require gas conditions with a pressure considerably below atmospheric pressure. A pressure of -700 mbar (300 mbar abs.) is considered as negative pressure. Below 300 mbar absolute the vacuum range begins, subdivided in rough, fine, high and ultra high vacuum.

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.

  • Premium

    Air quality monitoring

    To estimate the effects of aerosols on health and climate, it is essential to know their chemical composition. Sampling is done using two different types of aerosol collector. The first type are filter collectors that are based on the deposition of suspended particles on surfaces; the second type are powerful aerosol collectors.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Flow meters for steam measurement solutions

    As an innovative steam flow meter manufacturer, Sierra’s InnovaMass brand was the first multivariable mass vortex flow meter to launch to market in the late 1990s. Today our flow meter steam technology is successfully used across numerous applications. Sierra`s multivariable product line features an in-line version, the InnovaMass 240 vortex flow meter; a unique immersible version, the InnovaMass 241; and the InnovaMass cryogenic version.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Gas and vacuum solutions for compressed-air technology

    You are looking for a compressed-air station which is specially optimized for your case of application?  Beside of innovative and customized product solutions we offer with our compressed-air specialist AERZEN SYSTEMS a competent partner supporting you in the whole development cycle from conception up to realization and commissio...

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you