Tritium Monitoring Equipment For Monitoring And Testing Available In New Brunswick
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-3L-BL-8 is a lightweight, small footprint, DC voltage powered air sampling system operable from (1) on-board 4500 mAH NiMH batteries, (2) line power, or (3) automobile cigarette lighter ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q’s Mobile Air Sampling Station can be supplied with controllable flow rates from as little as 2 SCCM up to, as high as 200 SLPM. The unit can be equipped as either a single or dual flow sampling system – you make the call. Have an existing Stack Flow Rate Monitor? HI-Q’s MASS Unit can easily be linked together with an existing stack-flow monitor to achieve real-time ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-5L-BL-8 is a lightweight, small footprint, DC voltage powered air sampling system operable from (1) on-board 4500 mAH NiMH batteries, (2) line power, or (3) automobile cigarette lighter ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The MRB500H3E Tritium Bubbler is the state-of-the-art discriminating tritium collection instrument. Sample gas enters the instrument and flows through two (2) standard scintillation counter ready vials filled with ethylene glycol, which retain the HTO component. The sample gas, now less the tritiated water vapor, flows through a heated palladium sponge catalyst bed, which oxidizes the sample gas. ...
-
Manufactured by Overhoff Technology Corporationbased in USA
True, unambiguous measurement to low levels combined with a fast response (10 sec. electronic time constant), not matched by any other portable tritium survey ...
-
Manufactured by Tyne Engineering Inc.based in CANADA
The 1000 cc Ion Chamber is designed to be an in-line radiation in a process gas detector with the most typical application being Tritium. The inlet and outlet VCR 8 connectors allow the chamber to be easily mounted into an existing process line. The internal anode is connected to a floating BNC which can be biased up to 100 V. The high resistance ceramic of the feed through allows the ionization ...
-
Manufactured by US Nuclear Corporationbased in USA
The TRIATHALON model series are highly-sensitive yet rugged stack/effluent monitors built for continuous duty, designed for measuring the Tritium concentration in air. ...
-
Manufactured by US Nuclear Corporationbased in USA
Tritium Heavy Water Leak Detector; This monitor has been designed for real time low-level detection of Tritium in water in the industrial environment of nuclear power plants. The HWLD-1925 is distinguished with low MDA, reliability, ruggedness (suitable for Heavy Water Reactors (HWR), Pressurized Water Reactors (PWR), and Boiling Water Reactors ...
-
Manufactured by Tyne USA, Inc.based in USA
Used by Active Waste Facilities , Research Establishments, Nuclear Facilities and Fusion Laboratories. Model: 7030-OXZR-001 (Catalytic Oxidizer) was designed for converting organics containing tritium, to water that contains the tritium. This conversion is necessary for tritium removal processes because it is easier to extract tritium for safe storage from water than from ...
-
Manufactured by Technical Associatesbased in USA
This monitor was originally designed for real time low-level detection of tritium in water in the industrial environment of nuclear power plants and has now been updated and adapted for environmental and scientific applications. Low MDA, reliability, ruggedness and simplicity of operation is what sets this monitor apart from less durable laboratory type of the equipment. ...
-
Manufactured by Tyne Engineering Inc.based in CANADA
The Tritium Controller carries out the signal processing for multi-range tritium detector heads (ionization chamber with preamplifier). It is operated by a large, touch screen mounted on the front panel, it has an easy-to-read display and a full set of menu ...
-
Manufactured by Technical Associatesbased in USA
MSTR-H2O Model is a multi detector water monitor /controller for simultaneous measuring of alpha, beta and gammaemitting radio nuclides. The electronics are microprocessor with color LCD display. The pre-amps are plug in modules allowing change or addition of functions at a later date, and allow rapid repair by module replacement in the field. Gamma Spec shield can be opened for cleaning with ...
-
Manufactured by Technical Associatesbased in USA
The SSS-12P Manual Liquid Scintillation Counting System accurately quantitatively measures Carbon-14, Tritium and most other radioactive materials. But for measuring low levels of Tritium and C-14, Model # SSS-22P is recommended. Optionally, gamma ray counting is achieved by inserting and optically coupling an Nal(Tl) scintillation well crystal on the PM ...
-
Manufactured by Overhoff Technology Corporationbased in USA
Model 593 is sensitive only to tritium. A semipermeable membrane is used to isolate tritium oxide for passage into the instrument measuring system. All other sample constituents, including pollutants, radioisotopes, aerosols or particulates are removed and eliminated from the ...
-
Manufactured by Technical Associatesbased in USA
Technical Associates PTG-9 is a Tritium Air monitor; a highly sensitive, rugged, and portable instrument. A subtractive balanced chamber electrometer circuit decreases background effects to negligible levels and its deionized and filtered intake reduces spurious effects from smoke dust and existing ionization in the air. It is line operated with nominal 20 hour battery back-up. Optional inlet and ...
-
Manufactured by US Nuclear Corporationbased in USA
High Performance Tritium In Air Portable Survey Monitor. The Model 400SBDyC is a high-performance Tritium in air monitor, useful for measurements as low as 2µCi/m3. This model features an OTC electrometer, which measures below 10-16 amperes, and combines low noise and high zero stability. Unlike other instruments, the Model 400SBDyC no longer requires front panel zero control. The thermally ...
-
Manufactured by Tyne Engineering Inc.based in CANADA
Tyne's strength lies in its ability to both design and build tritium systems. For complex tritium systems it is this combination of skills which makes Tyne a better more practical designer, and a cautious and understanding manufacturer that is more aware of the consequences of inadequate manufacturing or ...
-
Manufactured by Overhoff Technology Corporationbased in USA
This wide range tritium monitoring station is designed to meet monitoring requirements established by NESHAP and EPA 40CFR or for DOE establishments for the determination of ultra low levels of airborne ...
-
Manufactured by Imspex Diagnostics Ltd.based in UNITED KINGDOM
The GC-IMS-ODOR is a fully automated, standalone instrument developed for at-site, on-line sampling and delivers quantification and reporting of Gasodor-S-Free (methyl acrylate and ethyl acrylate) and THT concentrations in natural ...
-
Manufactured by Tyne Engineering Inc.based in CANADA
This plant was designed and built by Tyne to take hydrocarbons containing tritium, and to separate out the carbon. This is done by first heating the hydrocarbons to high temperature over a catalyst with an abundance of oxygen to reduce the organics to carbon dioxide and water. The carbon dioxide together with excess oxygen will be filtered, dried, monitored for tritium and released to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you