Tritium Monitoring Equipment For Monitoring And Testing Near Nunavut
-
Manufactured by Overhoff Technology Corporationbased in USA
True, unambiguous measurement to low levels combined with a fast response (10 sec. electronic time constant), not matched by any other portable tritium survey ...
-
Manufactured by Overhoff Technology Corporationbased in USA
Model 593 is sensitive only to tritium. A semipermeable membrane is used to isolate tritium oxide for passage into the instrument measuring system. All other sample constituents, including pollutants, radioisotopes, aerosols or particulates are removed and eliminated from the ...
-
Manufactured by Overhoff Technology Corporationbased in USA
This monitor has been designed for real time low-level detection of tritium in water in the industrial environment of nuclear power plants. Low MDA, reliability, ruggedness (suitable for HWR, PWR, BWR) and simplicity of operation is what sets this monitor apart from laboratory type of the equipment. The initial purpose of the Model 1925 series was to detect the leak of heavy water in nuclear ...
-
Manufactured by Overhoff Technology Corporationbased in USA
The Overhoff Technology Corporation 200SB portable tritium survey monitor is a low cost light weight survey meter. The front panel features only three controls, an ON - OFF - SAMPLE switch and the switch for setting the alarm level. Zero adjustment is unnecessary, the 200SB shows no zero drift over a temperature range of 0° C to +50° C. A large pump and fast electronics are combined to ...
-
Manufactured by Overhoff Technology Corporationbased in USA
This wide range tritium monitoring station is designed to meet monitoring requirements established by NESHAP and EPA 40CFR or for DOE establishments for the determination of ultra low levels of airborne ...
-
Manufactured by Overhoff Technology Corporationbased in USA
A completely self contained passive sample collector for airborne radioactive material. The self-contained instrument consists of a pump, mass flow controller and regulated oxidizer. Two sets of vials are used to ensure that whatever may be missed by one vial is virtually certain to be trapped by a second and third. One set vials is used to collect tritium oxide, the air stream exiting from this ...
-
Manufactured by Overhoff Technology Corporationbased in USA
The FF-27 Tritium Contamination Monitors are portable gas flow proportional counters sensitive to betas of H-3. The windowless probes slide over flat surfaces on poly tape which gives repeatable spacing from surface as well as easy scratch-free movement. The poly tape is easily cleaned but may also be replaced if contaminated. P-10 counting gas utilized in the FF-27 probes is non-combustible and ...
-
Manufactured by Sartrex Incbased in CANADA
The Sartrex Model 209L is one of the world’s premiere Tritium-In-Air monitors. Users worldwide appreciate its functionality, portability and reliability. The rugged aluminum housing ensures reliable operation in the most demanding of environments. The clear digital readout allows the operator to take error-free readings at a ...
-
Manufactured by Sartrex Incbased in CANADA
The Model 309B (LD) Portable Tritium-In-Air monitor adds a new dimension to the versatility of monitoring instrumentation for the Nuclear Industry. The only true dual purpose instrument in the industry, Model 309B (LD) enables you to use the monitor as both a continuous remote area monitor and as a hand-held unit ensuring absolute ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
This apparatus uses catalyst assisted combustion techniques to give a clean and precise approach to extracting carbon-14 & organically bound tritium or ‘fixed tritium’, eg tritium contained in concretes, steels and graphites, as well as ‘free water’. A catalyst is used to ensure complete combustion of all thermal decomposition products. These are captured for liquid ...
-
Manufactured by Tyne Engineering Inc.based in CANADA
The 1000 cc Ion Chamber is designed to be an in-line radiation in a process gas detector with the most typical application being Tritium. The inlet and outlet VCR 8 connectors allow the chamber to be easily mounted into an existing process line. The internal anode is connected to a floating BNC which can be biased up to 100 V. The high resistance ceramic of the feed through allows the ionization ...
-
Manufactured by Tyne Engineering Inc.based in CANADA
The Tritium Controller carries out the signal processing for multi-range tritium detector heads (ionization chamber with preamplifier). It is operated by a large, touch screen mounted on the front panel, it has an easy-to-read display and a full set of menu ...
-
Manufactured by Tyne Engineering Inc.based in CANADA
Tyne's In-Core Amplifier Model 7007 provides the same functionality and form factor as existing In-Core Amplifiers, and at the same time improves the performance by using upgraded military components. Higher accuracy / linearity and higher reliability have been proved by the successfully completed functionality tests (results available on ...
-
Manufactured by Tyne Engineering Inc.based in CANADA
This equipment is based on two molecular sieve packed columns, each cryogenically cooled with liquid nitrogen, and can alternatively be heated in small increments along their length. Mixed isotopes of hydrogen from an electrolyzer are batch injected into the system and deposited onto one of the two cooled columns. Temperatures are regulated to allow the isotopes to come off the first column in ...
-
Manufactured by Tyne Engineering Inc.based in CANADA
Tyne's strength lies in its ability to both design and build tritium systems. For complex tritium systems it is this combination of skills which makes Tyne a better more practical designer, and a cautious and understanding manufacturer that is more aware of the consequences of inadequate manufacturing or ...
-
Manufactured by Tyne Engineering Inc.based in CANADA
This plant was designed and built by Tyne to take hydrocarbons containing tritium, and to separate out the carbon. This is done by first heating the hydrocarbons to high temperature over a catalyst with an abundance of oxygen to reduce the organics to carbon dioxide and water. The carbon dioxide together with excess oxygen will be filtered, dried, monitored for tritium and released to ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The MRB500H3E Tritium Bubbler is the state-of-the-art discriminating tritium collection instrument. Sample gas enters the instrument and flows through two (2) standard scintillation counter ready vials filled with ethylene glycol, which retain the HTO component. The sample gas, now less the tritiated water vapor, flows through a heated palladium sponge catalyst bed, which oxidizes the sample gas. ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-3L-BL-8 is a lightweight, small footprint, DC voltage powered air sampling system operable from (1) on-board 4500 mAH NiMH batteries, (2) line power, or (3) automobile cigarette lighter ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-5L-BL-8 is a lightweight, small footprint, DC voltage powered air sampling system operable from (1) on-board 4500 mAH NiMH batteries, (2) line power, or (3) automobile cigarette lighter ...
-
Manufactured by Mound Technical Solutionsbased in USA
The MRB500 Tritium Bubbler Collection Instrument provides the accurate and sensitive tritium measurements that are needed for environmental measurements, analytical research, and regulatory reporting. The MRB500 autonomously manages sample collection and flow/volume measurements and collects tritium in separate sets of standard liquid scintillation vials for measurement in your facilities ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you