Applications
-
Premium
Determination of fatty acid methyl ester (fame) content in diesel fuel or domestic heating fuel by MID-IR spectroscopy
Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN 14078:2014. Lumex Instruments provides user-friendly analytical ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Visual inspection solutions for the borescope for engine inspection
Visual inspections of engines and other hard to visualize places are an important part of ongoing automotive maintenance. Rigid and flexible borescopes are a great way to visually inspect engines without having to dismantle the engine block, as they allow you to remotely visualize dark, small, and hard to reach places. Routine inspection with a borescope will allow you identify problem areas and to replace or repair parts before they are causing problem. Flexible borescopes can also be used to track through parts ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Fully-automated gas chromatographs solutions for food storage monitoring sector
The use of Controlled Atmosphere (CA) and Ultra Low Oxygen (ULO) storage in the cool cells mean fruits and vegetables can be kept, in general, up to 2-4 times longer than usual. If at the same time the ethylene (a ripening/rotting agent) level is monitored in the cool cells, you will also know about the quality of the fruits and vegetables in cooling cells. This way you can select the appropriate cooling cell from which to deliver the produce with the best flavour and ...
By Synspec BV based in Groningen, NETHERLANDS.
-
Premium
Monitors, gas analyzers solutions for semiconductor / microelectronics sector
Particle Measuring Systems (PMS) has the application expertise and particle monitoring instruments with the industry leading sensitivity you need to reduce yield loss. Particle Measuring Systems PMS can provide you with particle monitoring solutions to determine how clean your semiconductor or microelectronics manufacturing is. By continuously counting particles when and where products (water, chemicals, air) are at risk, we provide the global expertise and high-performance laser particle counters you count ...
By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).
-
Premium
Flood Defense Barriers for Ponds & Water Retention
Flood Defense Group takes great pride in providing excellent solutions for the creation of cost effective ponds or water retention operations for a variety of uniquely tailored ...
By Flood Defense Group based in Boise, IDAHO (USA).
-
Premium
Geosynthetic Lining for Canals, Stormwater Impoundments and Wetlands
Composite laminated GCLs offer puncture and tensile strengths beyond conventional geomembranes. These GCLs offer the low permeability of a geomembrane combined with the high swelling and self healing characteristics of a traditional GCL. With their ease of installation, cost-effectiveness and resilience to physical and climate issues, GCLs are often specified in canals, stormwater impoundments or wetlands to control seepage and conserve valuable water where native soils are too ...
By CETCO based in New York, NEW YORK (USA).
-
Premium
Ambient air quality monitoring solutions for urban air quality monitoring
To measure air quality in the ambient air is a challenge. The monitoring site needs to be representative and not dependant on changes in local traffic. A large number of gaseous components need to be measured with high accuracy and high ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Determination of amino acids in beer and wort by capillary electrophoresis
Free forms of amino acids in beer originate mostly from malt. The following method enables fast quantitative determination in beer and wort of the following free amino acids: arginine, lysine, tyrosine, phenylalanine, histidine, leucine and iso-leucine (total), methionine, valine, proline, alanine, glycine, cystine, tryptophan, aspartic and glutamic acids. Total content of amino acids is fdetermined after hydrolysis of proteins. ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Visual inspection solutions for barrel inspection industry
If you are an avid hunter, target shooter, gunsmith, rifle collector, firearms manufacturer, or forensic scientist you will find our borescopes extremely valuable for proper care and maintenance of your rifle barrels. A high quality, well maintained barrel leads to tighter groupings on the target. Inspecting the grooves in the firearm can be completed to find erosion, fouling and tool-marks which effect accuracy. Rigid Borescopes and Rigid Video Borescopes are mostly used in the gun and rifle's barrel ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Flow Measurement in 8 Cooling Water Intakes solution for Industry - Power Plants
Application: 8 rectangular concrete channels, partially operating parallel. Dimensions between 2.0 x 2.0 m and 3.0 x 2.0 m (w x h). Permanently full filled at measurement spot. Surface water taken from large river. Control slide gates ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Air pollution control for the electronics & semiconductor fabrication industry
Anguil’s portfolio of innovative, competitive solutions for this rapidly evolving industry provide guaranteed VOC destruction, reduced equipment footprint, and maximized production uptime and ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
By ENVEA based in Poissy, FRANCE.
-
Premium
Erosion and dust control solutions for historical sites sector
Environmental Products and Applications proudly supports history. We understand that preserving history is vital. That is why we offer Historical discounts to help provide infrastructure that is severely needed to make our great history accessible. Our applications will increase the strength of dirt roads but keep the natural dirt ...
By Environmental Products & Applications, Inc. based in La Quinta, CALIFORNIA (USA).
-
Premium
ADVANCEES - Custom skid-mounted water purification equipments for building trades industry
We offer a complete line of solutions as follow: Desalination by reverse osmosis, brackish water reverse osmosis, multimedia filters, feed pump & feed pump skids, EDI, pre & post treatment options, membranes, softners, services & ...
By Advanced Equipment and Services, Inc based in Coral Springs, FLORIDA (USA).
-
Premium
Continuous emissions monitoring solutions for sulfuric acid production plants
The process control of a sulfuric acid plant needs good and reliable detection of gas phase sulfur dioxide (SO2). To measure SO2 is a challenge due to the corrosive environment and high concentration of SO2. Several places in the process needs to be monitored and to transport the sample gas is difficult. A large dynamic range is needed as the SO2 concentration can vary between 15% volume and a few mg/m3. Most systems installed need a lot of maintenance, sometimes as often as every ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
EHS Air Quality Monitoring for Industrial Compliances
Today, many industrial activities have significant environmental aspects. These aspects have environmental impacts that seldom create irreversible damage to mother nature. Lack of process control, irregular maintenance, or over-burdened design considerations give rise to many environmental violations. Air pollution is one key element that is often challenging for the organization to deal with. The absence of real-time air monitoring delays corrective actions and hence, affects the industry’s vision of ...
By Oizom Instruments Pvt. Ltd. based in Ahmedabad, INDIA.
-
Premium
Gas monitoring instruments and systems for compressed breathing air
Compressed breathing air is subject to strict limits of harmful contaminants defined in European standard EN 12021 and various defence standards such as DEF STAN 68-284 issue 3. The testing interval of breathing air compressors and associated equipment is 3 months and gases tested include carbon monoxide, carbon dioxide and oil vapour defined as hexane and heavier hydrocarbons. EN 12021 covers underwater applications including self-contained open circuit compressed gas breathing (SCUBA) and compressed gas line ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Advanced FT-NIR Analysis for Chemicals & Polymers Industry
Near infrared spectroscopy has been widely used in the chemicals and polymers industries for years. This is because it is a rapid technique that eliminates sample preparation and costly consumables. FT-NIR analysis is non-destructive, capable of simultaneous analysis of multiple components, and can be used for online monitoring. With flexible sampling mechanisms, NIR can analyze solids, liquids, and ...
By Galaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA).
-
Premium
Wastewater solutions for wastewater UV disinfection performance
Problem: Prior to environmental discharge, wastewater is disinfected to ensure pathogens present in the water are inactivated. Ultraviolet (UV) disinfection is becoming a widely accepted treatment technology for wastewater disinfection due to the deleterious effects of chlorine on aquatic life. The ability for the UV light to penetrate the water is directly related to the concentration of suspended particles and organic matter in water that absorb or scatter the ...
By Real Tech Inc. based in Whitby, ONTARIO (CANADA).
-
Premium
Blowers, compressors and gas meters for chemical and process technology
The chemical industry is completely dependent on reliable supplies of process gas. But each process is different and requires specialized machines. The solution: the efficient compressors and blowers from AERZEN – proven in numerous operating environments, suited for almost all media, unrivalled in their reliability, and adaptable to individual client specifications. Can the solution really be this easy? It ...
By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you