UKAS Laboratory Equipment For Monitoring And Testing Near Marshall Islands
-
Manufactured by Xylem Analyticsbased in USA
For almost a century, Xylem has been one of the world’s leading manufacturers of refractometers and polarimeters. Our expertise in optical engineering, electronics and software design has enabled the development of market-leading instruments that are used extensively throughout the world's food, beverage, pharmaceutical, chemical and petroleum industries as well as within ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The PTC thermocouple calibration furnace is designed to provide a high stability portable heat source for the calibration of thermocouples using the comparison ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The GEM5000 is an easy to use portable gas analyser designed to aid balancing the gas field, maximise power output and ultimately maximise revenue from CH4 ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The G100 provides the user with a fast, simple to use and accurate piece of laboratory kit. The key benefit of using the G100 is the ability to take simultaneous CO2, O2, relative humidity and temperature ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The GA5000 is an ATEX certified portable gas analyser for the landfill gas market. Easy to use and calibrate, the GA5000 benefits from our market leading reliability and helping you to standardise monitoring routines, whilst supporting environmental legislation ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A portable monitoring device using conductive cell technology for accurate, periodic measurements of the Acid Dewpoint Temperature (ADT) in combustion processes. Designed specifically to provide the unique but vital measurement of sulphuric acid dewpoint temperature, the portable Lancom 200 supports boiler efficiency checks, corrosion protection and the management of high-cost fuel ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Cyclops L Portable pyrometers are a range of premium quality, highly accurate hand-held instruments. Ergonomic single-handed use non-contact thermometers, provide easy, accurate point-and-measure temperature ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Human Body Temperature Measurement System (HBTMS) Calibration Source for infrared thermometers/pyrometers and thermal imagers designed to provide accurate, traceable and portable calibration ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Non-contact infrared thermometer custom-designed for accurate preform temperature measurements in optical fibre manufacture. Optimised for precise preform temperature control in vapour deposition processes, AMETEK Land’s Vapour Deposition Thermometer delivers a critical measurement for production of low-loss, high-bandwidth optical fibre. VDT enables exact sighting onto the rotating preform ...
-
Distributed by Instrumatics Ltdbased in NEW ZEALAND
The Fast-Cal is available in three ranges: -35°C to 140°C, 30°C to 350°C and 35°C to 650°C. Features: Rugged, hard-wearing stainless steel case Hygienic with no paint that can chip or flake Rugged, Lightweight - less than 6.6kg. Thermal Switch Test. Complete model with software carrying Case included Easy to use on site, Fast response - high stability. Built-in insert ...
-
Manufactured by Ellutiabased in UNITED KINGDOM
Accurate and repeatable gas flow measurements are a crucial part of obtaining good results from your Gas Chromatograph. The new 7000 GC Flowmeter makes gas flow measurement easier and more accurate, helping to eliminate user ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7050 is a simplified gas mixer based on the principle of gas stream through mass flow controllers (MFC) and mainly used to calibrate and linearize Gas Monitors. Built according to the ISO 6145/7 normalization, the Sonimix 7050 is totally compatible with the US EPA methods and can be easily linked with National Standards (NIST, METAS, UKAS…). The Sonimix 7050 Multi range gas ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 2106 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 2106 is based on the principle of gas flow through sonic nozzles and is built according the ISO 6145/6 standard. The sonic nozzle principle makes it the most accurate and stable device on the market. It generates binary mixtures from 0 to 100% in fixed steps in a ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7100 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 7100 is based on the principle of gas flow through MFC (Mass Flow Controllers) and is built according the ISO 6145/7 standards. This instrument provides a very high flexibility allowing to combine multigas mixtures (up to 5 gases + a balance gas) and multi-range ...
-
Manufactured by LGC Standards - LGC Limitedbased in UNITED KINGDOM
Hydrometers from Paragon Scientific are manufactured to exacting specifications. Each Hydrometer is available as non certified or with a UKAS certificate of calibration to ISO17025. For ISO 17025 Calibration please select the part number CS-HYD-UKAS from our Hydrometer Calibration Services ...
-
Manufactured by LGC Standards - LGC Limitedbased in UNITED KINGDOM
Certified in strict accordance with ASTM D2162, the primary method for viscosity standards manufacture. Dual certified to the International Standards BS EN ISO / IEC 17025 and ISO 17034 under our UKAS accrediatation. We test at Primary level using master viscometers in accordance with ASTM D2162 to ensure the lowest uncertainty of measurement thus providing standards that are certified with ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
BS EN 14181 is a quality assurance standard relevant to plants operating under the Large Combustion Plant (LCPD) and Waste Incineration (WID) Directives. Quality Assurance Level 2 (QAL2) of this standard involves the parallel testing of the plant automated measurement systems (AMS) against a certified test house, making measurements with a comparative ...
-
Manufactured by Q-Lab Corporationbased in USA
The QUV accelerated weathering tester reproduces the damage caused by sunlight, rain and dew. In a few days or weeks, the QUV tester can reproduce the damage that occurs over months or years outdoors. To simulate outdoor weathering, the QUV tester exposes materials to alternating cycles of UV light and moisture at controlled, elevated temperatures. It simulates the effects of sunlight using ...
-
Manufactured by Electronic Temperature Instruments Ltd (ETI)based in UNITED KINGDOM
Hygrometers - The 6100 & 6102 therma-hygrometers are easy to use hygrometers, or relative humidity and air temperature measuring meters. The units measure %rh over the range of 0 to 100%rh with a resolution of 0.1 %rh and temperature over the range of -20 to 70°C with a resolution of ...
-
Manufactured by Techcomp Instrumentsbased in UNITED KINGDOM
Precisa Gravimetrics are a Swiss manufacturer and designer of weighing solutions based near Zurich. Established in 1935, Precisa has a long history of design, manufacture and assembly of electronic weighing equipment to the highest ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you