Only show results in Virginia? Ok

Utility Locating Applications

  • Mobile Sewage Treatment for Remote Locations

    NOMADIC™ mobile sewage treatment systems are fully customizable, pre-plumbed, pre-wired and ready to be deployed in any off-the-grid location. The versatility of our systems allows them to be shipped using any method necessary to access your remote location.

    We do not limit ourselves by focusing on one specific application, we believe our technology can be used anywhere in the world where people require environmentally friendly sewage treatment.

    By Nomadic Systems based in Langley, BRITISH COLUMBIA (CANADA).

  • GPR Applications

    Our GPR products aid in determining mining safety, establishing bedrock depth, mapping sand and gravel deposits, ascertain rock quality, in addition to mineral exploration. Mining professionals use ground penetrating radar to accurately locate underground structures before drilling, blasting or carrying face operations. Ground penetrating radar is instrumental in helping to identify overhead separations in order to prevent ceiling collapses. In deep mine applications, ground penetrating radar is invaluable for identifying geologic features that may be potential areas for rock bursts, such as fractures, shear zones and faults. GPR is being used as well for mineral exploration in igneous and metamorphic rocks, such as granitic pegmatite, to locate hydrothermal features including cavities and vugs.

    By Geomorph Instruments based in Piraeus, GREECE.

  • Ground Penetrating Radars (GPR) for Construction and Infrastructure

    In construction and infrastructure field GPR application makes it possible to have the most detailed topography of undergrounding. GPRs help to discover ground water location, old underground passages and cavities remains and karst layers.

    By Transient Technologies LLC based in Kyiv, UKRAINE.

  • ALBUQUERQUE RESTAURANT EXCHANGES WATER SOFTENER FOR GREEN SCALEWATCHER WATER CONDITIONER

    Zorba’s Fine Greek Restaurant in Albuquerque, New Mexico, has saved money on water, maintenance and salt by replacing its water softener with the computerized, electronic, water-conditioner Scalewatcher® from Scalewatcher North America. Three months after installing Scalewatcher, the restaurant was able to remove its bulky water softener but still retain the benefits of soft water. Owned and run by Spiros and Marina Counelis, Zorba’s is not only located in a hard water area but also in a region where water conservation is a major priority for the local water authority. Customers are encouraged to implement water saving strategies which the water authority rewards with rebates. “Abuquerque has hard water, which resulted in our having an awful time keeping our dishes from spotting and having a cloudy appearance after they ran through the dish washer”, said Spiros Counelis. “We decided to install a conventional water softener but our water bill jumped considerably and we had constan

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

  • Vacuum excavation solutions for locate underground utilities / soft dig / pot holing

    Vacuum excavation is fast becoming a best practice in the field of construction and site excavation. Why? Because it uses jets of air (air excavation) or water (hydro excavation) to loosen soil, instead of a heavy metal claw. After loosening, the soil is pulled out of the ground through an air vacuum hose to a debris tank for later disposal or back-filling. Using non-destructive technology can quickly, safely and economically excavate in areas inaccessible to conventional digging equipment like backhoes and trenchers.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Handling hospital waste and laundry

    Large amounts of hazardous waste, contaminated waste and dirty laundry are handled in modern hospitals, and so hygiene and staff safety are important. This is why it is important to find sustainable waste solutions which do not require waste to be physically touched. This is achieved with the Envac vacuum system.

    By Envac AB based in Stockholm, SWEDEN.

  • Ground Penetrating Radars (GPR) for Archaeology

    In archaeology using GPR you can process considerable areas of planned excavations. Therefore, the needed excavation area can be substantially reduced. Time and financial costs reduce as well. Examining historical buildings GPRs allow to find hidden rooms, spot areas of demolition in the object structure. What is remarkable, you can make a noncontact research with GPR (e.g. above ground surface).

    By Transient Technologies LLC based in Kyiv, UKRAINE.

  • Ground Penetrating Radars (GPR) for Pipes and Cables

    GPRs allow you to find a location, measure a depth of underground pipes, and cables, and other infrastructure items. The unique quality of GPR - they can find both metallic and non-metallic items with an equal efficiency.

    By Transient Technologies LLC based in Kyiv, UKRAINE.

  • Premium

    Aqua M300 Intelligent Geophone

    With the Aqua M300 leak detectors have a multifunctional tool to Pinpoint or Pre-locate leakages and to trace pipes in conjunction with a PWG. The biggest advantage compared to other related products are the 256 analogue and digital filters which enables the user to shut off disturbing noises very precisely. Also the extension for H2 tracer gas comes without competition and makes this device a essential tool for leak detectors.

    By F.A.S.T. GmbH based in Langenbrettach, GERMANY.

  • Premium

    PipeMic

    Leak noises on plastic pipes are often not audible for correlation process or geophone application. Also the run of the pipes are often unkown. With the PipeMic from F.A.S.T. you have now a two in one tool - for the utmost precision leak detection, and pipe tracing with end point determination.

    By F.A.S.T. GmbH based in Langenbrettach, GERMANY.

  • Premium

    VOCs Fugitive emissions detection

    An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which cause severe health and safety hazards. Opgal`s EyeCGas Thermal Imager can detect the leaking gases from a distance and help reducing the threats

    By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.

  • Premium

    Continuous emissions monitoring for palm oil plants

    Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several locations.

    By Opsis AB based in Furulund, SWEDEN.

  • KRYSTAL KLEEN CAR WASHES REMOVES WATER SOFTENERS AFTER SCALEWATCHER INSTALLATION

    Krystal Kleen Car Washes in Hoover, Alabama has removed the water softeners from its three self-service car washes following the installation of the computerized, electronic, water-conditioner Scalewatcher® from Scalewatcher North America. This has not only saved the company thousands of dollars a year in salt but also provided a short-term payback on the units. Krystal Kleen Car Washes is located in a hard water area, with Total Alkalinity of around 200mg/L. This necessitated Jim LeNoir, owner of Kyrstal Kleen Car Washes, using water softeners at his three premises to prevent scale formation and water spotting on the cars. “I decided to try Scalewatcher at Montevallo since this was the hardest water location of the three”, said Jim LeNoir. “I stored the water softener just in case it was needed. However, after a year the Scalewatcher was working just as efficiently as the water softener and the customers were happy. Next installation was at Calera with the same results and finally at Homewood which has a spot free rinse system.” All car washes, including conveyor or rollover; high-pressure touchless automatics and self-serve bays, use water as the primary means of removing the dirt, road grime, salt, and snow off the surface of the vehicle during the wash process. Water softeners are the mainstay in the wash industry, providing a means of removing the hard mineral deposits that prevent soap from working efficiently. Water softeners are utilized to overcome the calcium carbonate that is the primary component of water hardness. However, in many States now, including Southern California, municipalities and water departments are severely limiting, and in some cases prohibiting, the use of salt-regenerating water softeners due to concern regarding the increased levels of salt in ground water. The award-winning Scalewatcher system not only helps car washes meet these regulations by minimizing salt usage but also saves money on salt purchase and has the additional benefit of removing scale from lines and nozzles. The environmentally friendly Scalewatcher provides a permanent solution to hard water problems without the need of chemicals, salt or maintenance. It works by producing a varying electronically applied force field, induced by a coil wrapped around the outside of the pipework, which keeps the minerals in suspension and thus prevents limescale forming. The water’s increased solubility enables it to dissolve existing scale, which is gradually washed away. “All the water softeners have now been removed freeing up much needed space and saving me money. Best of all I no longer have to haul salt pellets”, concluded Jim LeNoir. Scalewatcher models are based on continuous research and over 20 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems start at $248.00 USD and are capable of treating pipe sizes from one to 80 inches. All Scalewatcher systems come with a full performance guarantee and include free shipping throughout North America.

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

  • Water treatment research for pulp and paper industry

    Historically the pulp and paper industry has had little need for desalination and reuse – not least because the majority of production is located near water sources. Four things are changing this state of affairs: The move towards recycling means that production in mills located in “urban forest” areas is rising. These facilities face higher water costs than green forest located mills, and have a greater interest in water efficiency. The fastest growing market for pulp and paper is in China, where raw water sources are both limited and impaired, and water technologies which can address these challenges are at a premium.

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

  • Force Main Systems Sulfide Odor Control with Hydrogen Peroxide

    Force main systems are typically high sulfide odor generators due to septicity conditions related to full pipe flow and a greater anaerobic slime layer (biofilm) thickness. Primary factors that influence sulfide loading generation in a force main include sewage temperature, BOD, retention time, pipe size and flow. Gaseous hydrogen sulfide (H2S) release at the force main discharge is usually the main concern related to odor and corrosion control needs; however, corrosion problems within the pipe can be of a concern (e.g. "crown cutting") at locations where air pockets can lead to concentrated H2S gas build up. Some basic considerations for assessing an appropriate sulfide odor treatment method for force main systems include: Retention time / duration of control Pump station type / cycling (e.g. vfd; start/stop, etc). Force main injection tap points, if any (e.g. air relief valves) Existence of intermediate re-lift stations or in series pump stations Manifold force main systems

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Solution for the produce cooling and icing

    Fresh vegetables and fruits products require ice and/or chilled ice for preservation of quality. Ice and /or chilled water are used at all points in the chain of produce processing – ice is added during harvest process to start removal of the field heat from the product, top icing during processing, and liquid ice injection of boxes prior to shipment to the market, or central processing areas, or the end user. Processing requires continuous temperature control to maintain the best quality and extend the shelf life of the product. The use of ice reduces bacteria or enzyme activity in seafood products, slows decay, and yields a higher quality grade. Ice provides a sanitary means for this preservation.

    By Vogt Ice / Turbo based in Louisville, KENTUCKY (USA).

  • StructureScan

    Cutting and coring experts and construction professionals require a reliable, non-destructive means to locate targets within concrete structures prior to drilling, cutting or coring. The industry’s widest range of concrete inspection antennas ensures that StructureScan is optimized for one`s particular application. StructureScan is the tool of choice of concrete professionals based on ease of use, field-proven durability, and accuracy for locating rebar, post-tension cables and conduits.

    By Geomorph Instruments based in Piraeus, GREECE.

  • Premium

    Fast Water, Rivers & Lakes

    Oil spill response operations are notably difficult in rivers with strong current. In addition, when considering response times for river spills in relation to the mobilisation time required for conventional land- or vessel-based boom systems, a timely response is often a logistic impossibility especially in the more remote regions. Therefore, equipment must be readily at hand near the sites of operation and pre-rigged lines, cables and mooring areas are a must. Selection of a good location to deploy the oil containment system is dependent upon prior planning and understanding of the currents. Drift studies, river run off histories, tidal current tables and charts, plus computer modeling are all useful tools to understand the flow patterns and to develop recovery strategies. Reading the currents and flow patterns require practice and understanding of the hydrodynamics involved.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Waste recovery for construction industry

    Construction waste consists of unwanted material produced directly or incidentally by the construction industry. This includes materials that may contain lead, asbestos or other hazardous materials. There is increasing pressure on the construction industry to dispose of this hazardous material in an environmentally responsible manner. Tetronics can help alleviate this pressure by providing waste recovery plants to deal with all types of hazardous wastes generated from a construction projects lifespan: from land remediation through to the treatment of APCs from incineration as well as the treatment of asbestos.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Ground Penetrating Radars (GPR) for Fresh Water Reservoirs Eploring

    In hydrobiology GPR also find its applications: fresh water reservoir bottom structure. find items lying on the reservoir’s bottom and inside bottom sediment. measure of peat and other bottom sediments thickness . search for underwater piping and other infrastructure items. archaeological underwater explorations.

    By Transient Technologies LLC based in Kyiv, UKRAINE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you