Utility Monitoring Equipment For Monitoring And Testing Available In Newfoundland
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
High-Performance, Infrared Camera for Demanding Real-Time Imaging Applications. Advanced Energy's Mikron MC320 series is a cost-effective, high performance non-contact infrared imager that serves a broad range of process monitoring applications. Temperature measurement accuracy: ±2°C or 2% of reading. Focus range: 30 cm to infinity. Several configuration options, including over network ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Quadset Refrigerant Gas Monitor is designed to detect refrigerant leaks in enclosed areas. The Monitor utilizes a sophisticated NDIR sensor specific to any one of the commercially available refrigerants. It can monitor over a range of 0-1000ppm with a resolution threshold as low as 1ppm. The QuadSet can monitor up to four locations in one of two modes of operation, diffusion or ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Based on the Clean Air Act as well as local regulations, increasingly stringent environmental regulations require the overall reduction of Sulfur emissions. Consequently, it is necessary to monitor and control specific sulfur constituents and total sulfur content in products that are combusted and emitted. Siemens on-line MAXUM Process Gas Chromatographs and Gas Analyzers are utilized for Total ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
High-resolution short-wavelength radiometric infrared borescope imaging cameras designed for a wide range of continuous process monitoring and control applications. The NIR-Borescope-656 (NIR-B-656) and NIR-Borescope-2K (NIR-B-2K) are high resolution short wavelength full radiometric infrared borescope imaging cameras, designed to produce continuous live high definition thermal images, at an ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The AirSentry II Multi-point Monitoring System is the most advanced airborne molecular contamination (AMC) monitor available, utilizing sensitive and responsive ion mobility spectrometry to detect and characterize airborne molecular contamination from multiple locations within a cleanroom. The system features a 16- or 30-point manifold sampling system and an on-board computer with secure software ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
By delivering accurate and reliable flare monitoring, the ARC thermal imager and IMAGEPro advanced thermal imaging software ensure that plants can meet flare stack emissions requirements in a safe and efficient ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The GAS-100-XX/100E-XX Series portable flow computer systems are designed to upgrade existing air sampling systems. The GAS-100-XX/100E-XX are connected in line between the pump inlet and the filter holder. The GAS-100-XX/100E-XX upgrade eliminates the need to engage in expensive conversions of equipment or the need to purchase new air sampling ...
-
based in UNITED KINGDOM
For those who already have the complete untility meter monitoring package and just need extra logging units to monitor additional ...
-
Manufactured by iCenta Controls Ltdbased in UNITED KINGDOM
A series of dedicated air or nitrogen mass flow meters, indispensable for managing energy use with compressed air / nitrogen up to 12000 L/min ...
-
Manufactured by Komatsu America Corp.based in USA
Keep your operation humming. No matter what boom length, bucket capacity or geometry you need, you’ll find a P&H dragline built from the ground up to deliver long-term, consistent, reliable ...
-
Manufactured by TSI Incorporatedbased in USA
Ultrafine particles are omnipresent in our atmosphere, and their number concentration can be very strongly influenced by weather and local particle sources, such as traffic. The Model 3783 Environmental Particle Counter was developed especially for near-freeway monitoring, i.e. continuous observation in high-concentration environments. Based on proven Condensation Particle Counter (CPC) ...
-
Manufactured by ASYS Groupbased in GERMANY
The DIVISIO 2000 Ergo is a semi-automatic system for stressfree depaneling of PCBs. By positioning the routing axis either above or below the electrically driven rotary table, the system has the flexibility to represent a verified production process. It can therefore be used without any restrictions as back-up for the inline production. The X- and the Y-axes are both equipped with highly dynamic ...
-
Manufactured by BDF Digital S.p.A.based in ITALY
A product suitable for all applications and all types of motors. Three types of cooling: traditional air cooling, water cooling for maximum efficiency, gas cooling for compressor ...
-
Manufactured by TCI International, Inc.based in USA
The demand for spectrum bandwidth continues to rise as the number of wireless devices increases. Advances in wireless technology provide broader, more complex signals which compels Regulators to license broader bandwidths to alleviate crowding of traditional ...
-
Manufactured by Haltianbased in FINLAND
Thingsee ENVIRONMENT is a multipurpose, retrofittable, wireless IoT device for environment monitoring. It can be used for a variety of business ...
-
Manufactured by Omniflex (Pty) Ltdbased in SOUTH AFRICA
The TELETERM Silent Sentry is a state-of-the-art Alarm Monitor capable of monitoring a wide range of input types and sending SMS Alarm messages upon detection of an alarm ...
-
Manufactured by Midac Corporationbased in USA
For years, MIDAC has provided customized solutions for demanding gas analysis applications. This accumulated experience uniquely qualifies us to provide 'total solutions' for virtually any gas analysis need - from environmental to industrial process applications. The versatility of I-Series gas analysis systems enables us to work with you to configure a system that will deliver precisely the ...
-
Manufactured by M2 Optics, Inc.based in USA
Detecting serious physical network infrastructure issues like accidental fiber cuts, intrusion attempts, and malicious tampering has never been easier than utilizing this Fiber Monitoring System from M2 Optics. The first solution approach in the industry that was designed to minimize monitoring costs on a per-fiber basis, all the hardware and software is integrated into a single low-profile ...
-
Manufactured by Mauna Kea Technologiesbased in FRANCE
Cellvizio technology is simple to use, with an intuitive interface. Clinicians can record and watch videos and review previously-recorded ...
-
Manufactured by Fluke Process Instrumentsbased in USA
The Ircon Modline®7 infrared thermometers are designed for continuous temperature monitoring in nearly any application in industrial temperature process control. Offering four different models to choose from these rugged pyrometers feature an IP65 (NEMA 4) enclosure, standard motorized focus control, as well as through-the-lens and laser sighting. With extended temperature ranges, high ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you