Utility Monitoring Equipment For Monitoring And Testing Available In Maryland
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The GAS-100-XX/100E-XX Series portable flow computer systems are designed to upgrade existing air sampling systems. The GAS-100-XX/100E-XX are connected in line between the pump inlet and the filter holder. The GAS-100-XX/100E-XX upgrade eliminates the need to engage in expensive conversions of equipment or the need to purchase new air sampling ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The AirSentry II Multi-point Monitoring System is the most advanced airborne molecular contamination (AMC) monitor available, utilizing sensitive and responsive ion mobility spectrometry to detect and characterize airborne molecular contamination from multiple locations within a cleanroom. The system features a 16- or 30-point manifold sampling system and an on-board computer with secure software ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
High-Performance, Infrared Camera for Demanding Real-Time Imaging Applications. Advanced Energy's Mikron MC320 series is a cost-effective, high performance non-contact infrared imager that serves a broad range of process monitoring applications. Temperature measurement accuracy: ±2°C or 2% of reading. Focus range: 30 cm to infinity. Several configuration options, including over network ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
By delivering accurate and reliable flare monitoring, the ARC thermal imager and IMAGEPro advanced thermal imaging software ensure that plants can meet flare stack emissions requirements in a safe and efficient ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Quadset Refrigerant Gas Monitor is designed to detect refrigerant leaks in enclosed areas. The Monitor utilizes a sophisticated NDIR sensor specific to any one of the commercially available refrigerants. It can monitor over a range of 0-1000ppm with a resolution threshold as low as 1ppm. The QuadSet can monitor up to four locations in one of two modes of operation, diffusion or ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
High-resolution short-wavelength radiometric infrared borescope imaging cameras designed for a wide range of continuous process monitoring and control applications. The NIR-Borescope-656 (NIR-B-656) and NIR-Borescope-2K (NIR-B-2K) are high resolution short wavelength full radiometric infrared borescope imaging cameras, designed to produce continuous live high definition thermal images, at an ...
-
Manufactured by Poseidon Systems, LLCbased in USA
Poseidon Systems’ Trident LH sensor monitor’s the oil level, quality, and water contamination in real-time. The device promotes conditioned-based maintenance practices, allowing for the earliest indication of lubricant issues and avoiding costly downtime. ...
-
Manufactured by D-tect Systemsbased in USA
The Rad-DXG is a ruggedized, industrial grade gateway monitor that can be utilized to detect radioactive material. The Rad-DXG utilizes large area plastic scintillators totaling up to 1440 cubic inches to detect the movement of gamma emitting isotopes passing through doorways, entrance gates or other similar openings. The instrument is durable and easy to operate with minimal training. ...
-
Manufactured by PureLinebased in USA
The CG series generator is a two chemical system using PureMax (a proprietary blend of chlorate and reducing agents) and high strength sulfuric acid to chlorine dioxide at over 95% efficiency. This process is the most economical way to produce medium to large amounts of chlorine dioxide (20 to 4000lbs/day). The CG generator produces chlorine dioxide on demand efficiently and without the need for ...
-
Manufactured by Insite Instrumentation Group, Inc.based in USA
The M-20T Sensor is intended for inline dissolved oxygen monitoring utilizing a by-pass loop. The by-pass loop is generally configured using customer supplied full port ball valves on both sides of the tee. The supplied tee (as shown) is 3" schedule 80 PVC, with slip connections. The integrated jet clean with this sensor includes an inline check valve. There is a flow indication groove on the ...
-
Manufactured by SEPAC Corporationbased in USA
Compact Communication Controller Equipment that manages a wide range of communication protocols either standard or proprietary. Insures full connectivity to any Protection, Automation and Control equipment with Lan Ethernet and Superior Level ...
-
based in USA
This revolutionary new product is a breakthrough in the well disinfection process. Guaranteed to kill and control both nuisance and disease causing microorganisms in an average depth artesian (drilled) or shallow ...
-
Manufactured by Bridger Scientific Inc.based in USA
The DATS-IV Fouling Monitor utilizes the latest in microprocessor technology to simulate condenser / heat exchanger environment on a fluid side stream through a controlled tube section. By matching the tube material, heat flux, and flow rates to an actual process, the DATS-IV is able to provide vital information regarding performance degradation, and economic loss due to fouling. Calibrated ...
-
Manufactured by Biodata Ltdbased in UNITED KINGDOM
The culmination of 40-years of experience designing data acquisition and control systems has resulted in this extremely versatile unit. The Microlink 840 lets you perform a multitude of data acquisition and control tasks, all in one small box. You can use it anywhere on an Ethernet network or over the ...
-
Manufactured by Insite Instrumentation Group, Inc.based in USA
The Model 10T Sensor is intended for inline Dissolved Oxygen monitoring utilizing a by-pass loop. The by-pass loop is generally configured using customer supplied full port ball valves on both sides of the tee. The supplied tee (as shown) is 3' Schedule 80 PVC, with slip connections. The integrated jet clean with this sensor includes an inline check valve. There is a flow indication groove on the ...
-
Manufactured by ASYS Groupbased in GERMANY
All systems of the DIVISIO 2000 Series can optionally be equipped with a robot interface. This interface allows the semi-automatic systems to be loaded and unloaded fully ...
-
Manufactured by Wuhan Easy-Sight Technology Co., Ltdbased in CHINA
X5-HMA pipeline CCTV inspection robot is a high-definition pipeline CCTV inspection robot, which can be controlled by a personal notebook computer or a dedicated controller. A laptop computer or a dedicated controller is connected to other parts of the system through a wireless (wired) method, and displays and stores high-definition detection videos in ...
-
Manufactured by Teledyne Monitor Labs, Inc.based in USA
For continuous particulate monitors. A complete system includes an optical head, purge system, enhanced remote panel fulfilling all QA/QC requirements. The optical head is built of heavy gauge aluminum parts and finished with acid-resistant enamel paint. All exposed hardware is stainless steel. The rugged design and extremely low heat generation allows operation over a wide range of ambient ...
-
Manufactured by Monitoring Solutionsbased in USA
CEMDAS Evolution offers the most powerful and easy-to-use Data Acquisition System (CEMS DAS) on the market today. Its advanced design is programmed in Visual Basic.net, utilizes a powerful SQL database and runs in the latest Windows operating system. CEMDAS can also be added to any Continuous Emissions Monitoring System (CEMS). ...
-
Manufactured by Kesar Control Systemsbased in INDIA
A Walk-in chamber is a stability chamber that is large enough for a scientist to physically walk into and perform their tests. Walk-in chamber types are prevalent in more prominent pharmaceutical companies where large batches of drugs are to be tested at the same time. Other than that, a walk-in chamber works in the same way as a normal reach-in stability chamber by managing the parameters of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you