Vapor Monitoring Equipment For Monitoring And Testing Available In Tajikistan
-
PremiumManufactured by AMS, Inc.based in USA
Designed to be driven into the soil, opened for sample extraction, and removed for subsequent use. The AMS Retract-A-Tip is a survey tool for collection of discrete soil vapor samples below the ground surface, usually at discrete depths. The sampler is 300 series stainless steel, with a 400 series stainless steel drive tip. It may be driven to the sampling depth using an AMS slide hammer or ...
-
PremiumManufactured by AMS, Inc.based in USA
Prevent cross contamination with a cased access hole. The portable AMS Hollowstem auger kit provides the tools needed to reach a 6' depth. The augers cut a 3' diameter hole and have an ID of 1 1/8', making them suitable for soil, soil gas and groundwater sampling through a cased hole. A special Hollowstem soil probe, 7/8' OD by 24' long with slide hammer is included to allow collection of a soil ...
-
PremiumManufactured by AMS, Inc.based in USA
Probe up to 20' with extensions!: AMS extendible tile probes are made from high carbon stress relieved steel and are not plated. Designed for probing depths of 12' or more, they may also be used to prepare holes for insertion of small diameter soil or or gas vapor probes. At deeper depths, use an AMS slide hammer or compact slide hammer. Tile Probe Complete Includes: Base extension (3' or 4' ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Vapor Implants have double woven stainless steel wire screens with a .0057-in. (0.15mm ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS 6-inches (152mm) Gas Vapor Implant Installation Kit are used for permanent soil gas monitoring, UST monitoring, groundwater sampling, air sparging, vapor extraction monitoring, and as a pressure measurement point in vacuum testing. This kit allows a user to obtain or collect a soil gas sample by positioning or placing a 6” implant in the subsurface, and subsequently withdrawal a sample ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS GVP Foot Jack is specifically designed to extract AMS 5/8” diameter gas vapor probe extension rods. The special open slot design on the shackle/jaws allow you to rapidly connect and disconnect from the extension strand. There is no need to thread on any type of T-jack adapter with this foot removal jack. The pair of jaws are designed to grab directly onto the GVP extension rods in order ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
The water analyzer measures residual oxygen concentration, pH values and conductivities of the boiler feed water and pH values of the boiler water. - For the fully-automatic measurement and monitoring of the boiler water quality - Increase in operating safety thanks to continuous monitoring of the water values - Automated monitoring with constant measurement of the pH value, oxygen content and ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
As part of a facility monitoring solution, the Airnet® II and IIs Particle Sensors from Particle Measuring Systems are an EU GMP Annex 1 solution that meets the specifications of ISO 21501-4 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. A simple and cost-effective way to monitor your cleanroom, the Airnet II Air Particle ...
-
PremiumManufactured by AMS, Inc.based in USA
Sample for volatile organic and inorganic compounds from beneath floor slabs. Sub-slab sampling and routine monitoring has become an integral part of vapor intrusion investigations. The AMS Sub-Slab Gas Vapor Probe Kit provides a semi-permanent probe, designed to allow repeated sampling over time in order to assess the potential of contaminated vapor intrusion from beneath buildings and offers an ...
-
PremiumManufactured by AMS, Inc.based in USA
Install as permanent sample point, or leave in ground as a disposable point. AMS dedicated gas vapor tips are used for detecting hydrocarbon spills, underground storage tank and pipe leaks, landfill contamination and hazardous waste sites. Soil gas monitoring with the AMS dedicated gas vapor tip is easily accomplished using an available AMS gas vapor probe ...
-
PremiumManufactured by AMS, Inc.based in USA
Fluoropolymer Tubing and Polythylene Tubing are used with AMS Retract-A-Tip, the AMS dedicated tip, AMS Gas Vapor Probe Kits, and vacuum pumps for collecting soil gas ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Electronics Platform: Network enabled. Touch screen interface. Local data storage and front panel USB port. Remote access (troubleshooting, control and configuration). Improved data and instrument parameter logging. Additional functionality via optional s/w plugins (std. additions, remote valve control, and much ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1110 Synchronized Two Port Sampling System gives the Model 2537 Mercury Vapor Analyzer the ability to sample two unique sources. Switching between the two sources is synchronized with the instrument sampling cycle and is fully programmable by the user. This is particularly useful for flux chamber studies to measure inlet and outlet concentrations, or gradient flux measurements at ...
-
PremiumManufactured by AMS, Inc.based in USA
Easily and economically sample soil gas vapors at shallow depths for preliminary testing. The AMS "original" gas vapor probe can take vapor samples in soils to depths of 12' depending on soil conditions. This kit is an excellent choice for shallow gas vapor sampling in soft soil. The kit includes a base section with a probe tip and soil gas access holes above. An included liner rod with tip is ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekranh Model 1130 Oxidized Mercury Speciation Unit expands the Model 2537 Mercury Vapor Analyzer capabilities to simultaneously monitor elemental and gaseous oxidized mercury (GOM, aka RGM) species in ambient air. The patented Model 1130 is the only system in the world capable of automated mercury speciation determinations in air. The Model 1130 is an invaluable tool for mercury detection, ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1100 Zero Air Generator provides Hg free air for up to two Model 2537 Mercury Vapor Analyzers. Using an included communication cable, the Model 1100 will only produce zero air when needed by the Model 2537 analyzer, greatly increasing the lifespan of the zero air filters. The Model 1100 eliminates the need of compressed gas cylinders of Ultra High Purity (UHP) zero air. This is ...
-
PremiumManufactured by AMS, Inc.based in USA
Add Torque to your Gas Vapor Probe system!.The heavy-duty gas vapor probe kits have all of the components included in the regular GVP kits, but with the added benefit of flighted augers which allow you to penetrate rocky and hard soil conditions. The kit comes with enough flighted extensions to pre-bore a hole to a depth of 9 feet! The heavy duty GVP kits also come with a larger 2 1/2” ...
-
PremiumManufactured by AMS, Inc.based in USA
Excellent for monitoring and sampling hydrocarbon spill sites, underground storage tanks and pipelines. AMS GVP kits use an AMS slide hammer or an electric rotary drive hammer and GVP drive extensions to insert a stainless steel GVP tip to the desired sampling depth. Fluoropolymer tubing is attached to a barb fitting on the GVP tip for remote sampling from the surface. Two GVP tips are available ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1115i Synchronized Multi-Port Sampling System utilizes the advanced capabilities of the Model 2537X Mercury Vapor Analyzer to conditionally control up to eight separate valve input/output ports. The 1100i can be configured to automatically sample eight separate input ports. With the 1115i valves can be triggered based on a pre-set activation time, a pre-set delay interval, the ...
-
Manufactured by Dega CZ s.r.o.based in CZECH REPUBLIC
The DEGA NSx-yL III gas transmitter – is a part of the detector that is placed in the monitored area that is designed to protect the health and property of people in a location in which a critical situation could occur through an accumulation of flammable or toxic gases. The transmitter includes a sensor that ensures sensing of the ambient air with the subsequent transfer of any actual gas ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you