Vapor Monitoring Equipment For Monitoring And Testing Near Tuvalu
-
PremiumManufactured by AMS, Inc.based in USA
AMS GVP Foot Jack is specifically designed to extract AMS 5/8” diameter gas vapor probe extension rods. The special open slot design on the shackle/jaws allow you to rapidly connect and disconnect from the extension strand. There is no need to thread on any type of T-jack adapter with this foot removal jack. The pair of jaws are designed to grab directly onto the GVP extension rods in order ...
-
PremiumManufactured by AMS, Inc.based in USA
Prevent cross contamination with a cased access hole. The portable AMS Hollowstem auger kit provides the tools needed to reach a 6' depth. The augers cut a 3' diameter hole and have an ID of 1 1/8', making them suitable for soil, soil gas and groundwater sampling through a cased hole. A special Hollowstem soil probe, 7/8' OD by 24' long with slide hammer is included to allow collection of a soil ...
-
PremiumManufactured by AMS, Inc.based in USA
Install as permanent sample point, or leave in ground as a disposable point. AMS dedicated gas vapor tips are used for detecting hydrocarbon spills, underground storage tank and pipe leaks, landfill contamination and hazardous waste sites. Soil gas monitoring with the AMS dedicated gas vapor tip is easily accomplished using an available AMS gas vapor probe ...
-
PremiumManufactured by AMS, Inc.based in USA
Designed to be driven into the soil, opened for sample extraction, and removed for subsequent use. The AMS Retract-A-Tip is a survey tool for collection of discrete soil vapor samples below the ground surface, usually at discrete depths. The sampler is 300 series stainless steel, with a 400 series stainless steel drive tip. It may be driven to the sampling depth using an AMS slide hammer or ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS 6-inches (152mm) Gas Vapor Implant Installation Kit are used for permanent soil gas monitoring, UST monitoring, groundwater sampling, air sparging, vapor extraction monitoring, and as a pressure measurement point in vacuum testing. This kit allows a user to obtain or collect a soil gas sample by positioning or placing a 6” implant in the subsurface, and subsequently withdrawal a sample ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Vapor Implants have double woven stainless steel wire screens with a .0057-in. (0.15mm ...
-
PremiumManufactured by AMS, Inc.based in USA
Sample for volatile organic and inorganic compounds from beneath floor slabs. Sub-slab sampling and routine monitoring has become an integral part of vapor intrusion investigations. The AMS Sub-Slab Gas Vapor Probe Kit provides a semi-permanent probe, designed to allow repeated sampling over time in order to assess the potential of contaminated vapor intrusion from beneath buildings and offers an ...
-
PremiumManufactured by AMS, Inc.based in USA
Add Torque to your Gas Vapor Probe system!.The heavy-duty gas vapor probe kits have all of the components included in the regular GVP kits, but with the added benefit of flighted augers which allow you to penetrate rocky and hard soil conditions. The kit comes with enough flighted extensions to pre-bore a hole to a depth of 9 feet! The heavy duty GVP kits also come with a larger 2 1/2” ...
-
PremiumManufactured by AMS, Inc.based in USA
Fluoropolymer Tubing and Polythylene Tubing are used with AMS Retract-A-Tip, the AMS dedicated tip, AMS Gas Vapor Probe Kits, and vacuum pumps for collecting soil gas ...
-
PremiumManufactured by AMS, Inc.based in USA
Excellent for monitoring and sampling hydrocarbon spill sites, underground storage tanks and pipelines. AMS GVP kits use an AMS slide hammer or an electric rotary drive hammer and GVP drive extensions to insert a stainless steel GVP tip to the desired sampling depth. Fluoropolymer tubing is attached to a barb fitting on the GVP tip for remote sampling from the surface. Two GVP tips are available ...
-
PremiumManufactured by AMS, Inc.based in USA
Probe up to 20' with extensions!: AMS extendible tile probes are made from high carbon stress relieved steel and are not plated. Designed for probing depths of 12' or more, they may also be used to prepare holes for insertion of small diameter soil or or gas vapor probes. At deeper depths, use an AMS slide hammer or compact slide hammer. Tile Probe Complete Includes: Base extension (3' or 4' ...
-
PremiumManufactured by AMS, Inc.based in USA
Easily and economically sample soil gas vapors at shallow depths for preliminary testing. The AMS "original" gas vapor probe can take vapor samples in soils to depths of 12' depending on soil conditions. This kit is an excellent choice for shallow gas vapor sampling in soft soil. The kit includes a base section with a probe tip and soil gas access holes above. An included liner rod with tip is ...
-
Manufactured by AMETEK Brookfieldbased in USA
The Jerome J405 portable mercury vapor monitor is redefining the portable mercury vapor analyzer market. Significant performance enhancements and modern communications capabilities have been combined to create a new option for mercury spill detection and clean-up analysis. The J405 utilizes the industry-proven, inherently stable and reliable gold film sensor technology and simple, one-button ...
-
Manufactured by AMETEK Brookfieldbased in USA
The Jerome 651 monitoring system from Arizona Instrument LLC is the system you need to solve your hydrogen sulfide monitoring problems. Designed to provide long-term monitoring even in extreme weather conditions, it can be stationed at any location. Multiple units can be linked to form a perimeter monitoring system. Data logging and radio telemetry capabilities make downloading data convenient ...
-
Manufactured by AMETEK Brookfieldbased in USA
The Jerome 451 monitoring system from Arizona Instrument is the tool you need to solve your mercury monitoring problems. Designed to provide long-term monitoring even in extreme weather conditions, it can be stationed at any location that requires monitoring. Multiple units can also be linked to form a perimeter monitoring system. Data logging and radio telemetry capabilities make downloading ...
-
Manufactured by AMETEK Brookfieldbased in USA
The Jerome J505 Mercury Vapor Analyzer is a portable fluorescence spectroscopy analyzer, which allows the detection cell to be simpler, smaller, lighter weight and more durable than competing spectroscopy instruments. The highly efficient optical cell requires less flow to purge the system, allowing the J505 to run at a lower flow rate minimizing sample dilution as found in competing spectroscopy ...
-
Manufactured by Sierra Instruments, Inc.based in USA
The InnovaSwitch insertion-type flow switch is a high-performance, industrial-grade mass flow switch for liquids and gases. This product was designed for heavy industrial environments, including high temperature and high pressure. Each InnovaSwitch includes temperature compensation over its entire measurement range to ensure set point stability and accuracy for process temperatures that vary up ...
-
Manufactured by P S Analytical Limitedbased in UNITED KINGDOM
The PSA S570C100 is an accessory specifically designed to be used with the PSA S570U100 Heated Speciation Coil or the PSA 10.570 UV Cracker in speciation studies of organomercury, organoarsenic or organoselenium compounds and the automatic digestion for total mercury analysis using vapour generation atomic fluorescence spectrometric ...
-
Manufactured by P S Analytical Limitedbased in UNITED KINGDOM
The PSA 10.670 is specifically designed to determine total gaseous mercury (TGM) in process gas streams such as natural gas, sour gas, fuel gas, LNG, LPG, butane, ethylene, propylene, hydrogen, carbon dioxide and Syngas. It is also used for measuring total mercury in volatile liquid hydrocarbons and condensates. The system is used in conjunction with a PSA 10.54X Online Sampling system for ...
-
Manufactured by Tuthill Corporation - Tuthill Vacuum & Blower Systemsbased in USA
Features: Recommended for applications where operating pressure is below 0.1 Torr (0.13 mbar). Achieve lowest possible pressures from mechanical pumps. Rugged and reliable. No metal-to-metal contact between pump piston & cylinder - clearances are filled with oil Unequaled durability, even in dirty applications. KC pumps are air-cooled. Adjustable gas ballast valves are standard for handling ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you