Vapor Sampling Equipment For Monitoring And Testing In Europe
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
This kit was developed for sampling of nitrous oxide, isofluorane, ethrane, halothane, and sevorane in surgical theaters. Parts for one complete sampler are packed separately in one sealed and sterile bag. Pack of 10 sterile ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
The Supelco ATIS is a sample preparation device for adsorbent tubes. The Adsorbent Tube Injector System employs the technique of flash vaporization to vaporize the sample into a continuous flow of an inert gas, which carries the sample to the adsorbent tube. The sample pathway of the Adsorbent Tube Injector System is constructed of glass and stainless steel. The calibration standard is injected ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
The Supelco ATIS is a sample preparation device for adsorbent tubes. The Adsorbent Tube Injector System employs the technique of flash vaporization to vaporize the sample into a continuous flow of an inert gas, which carries the sample to the adsorbent tube. The sample pathway of the Adsorbent Tube Injector System is constructed of glass and stainless steel. The calibration standard is injected ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Simplified and enhanced headspace sampling system designed to extract representative samples from the liquid phase. The vaporized sample can be preconcentrated using a trap to achieve quantification at very low concentration levels (ppb and/or ppm). Then, it is injected automatically and in continuous mode into the auto-GC ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Vapor Implants have double woven stainless steel wire screens with a .0057-in. (0.15mm ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3433i is a highly accurate and reliable multi-gas monitor with a special configuration for Exhaust Gas or SHED evaporative testing. The measurement system, based on the photoacoustic infrared detection method, is capable of measuring almost any gas that absorbs infrared light. Gas selectivity is achieved through the use of optical filters. Selectively measures a wide ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The CON 765 NOY converter was developed for combination with a highly sensitive ECO PHYSICS CLD analyzer and allows the measurement of the total reactive nitrogen oxides (NOY) in the range of parts per ...
-
PremiumManufactured by AMS, Inc.based in USA
Designed to be driven into the soil, opened for sample extraction, and removed for subsequent use. The AMS Retract-A-Tip is a survey tool for collection of discrete soil vapor samples below the ground surface, usually at discrete depths. The sampler is 300 series stainless steel, with a 400 series stainless steel drive tip. It may be driven to the sampling depth using an AMS slide hammer or ...
-
PremiumManufactured by AMS, Inc.based in USA
Easily and economically sample soil gas vapors at shallow depths for preliminary testing. The AMS "original" gas vapor probe can take vapor samples in soils to depths of 12' depending on soil conditions. This kit is an excellent choice for shallow gas vapor sampling in soft soil. The kit includes a base section with a probe tip and soil gas access holes above. An included liner rod with tip is ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's Innova 1314i is a highly accurate, reliable, and stable quantitative gas monitor. Its measurement principle is based on the photoacoustic detection method. Extremely versatile by design, the 1314i can measure at trace levels almost any gas that absorbs infrared light. Multi-gas monitoring of up to five different gases (+ water vapor) can be measured with excellent sensitivity ...
-
Manufactured by Cytivabased in USA
Cytiva’s Whatman Grade GF 8 glass microfiber filters are used for filtration of coarse particles. GF 8 offers faster filtration and a higher air flow rate compared to the similar Grade GF 9 ...
-
Manufactured by Vapor Pinbased in UNITED KINGDOM
Used to close sampling port when not in use. Vapor Pin® Caps are placed on top of any type of Vapor Pins equipped with barb fittings or quick connects, and prevent soil gas from escaping between sample events. Caps should be replaced each time the Vapor Pin® sampling device is installed. ...
-
Manufactured by Moisture Control & Measurement Ltdbased in UNITED KINGDOM
MCM’s unique Temperature Controlled Silicon Sensor, Push Purge® feature and the latest digital circuitry are combined in an analyser measuring just 220mm x 108mm x 50mm and weighing barely 1kg. Continuous on-line analysis. Ideal for all inert gases, including: Ar, O2, N2, He and Air (MicroView Mini is not gas specific, so you can easily change between gas streams). MicroView Mini can be ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Using high-resolution ultraviolet (UV) technology in a dual-beam, multiple-wavelength configuration, the 900 is specifically designed to meet the demanding analytical requirements of modern sulfur recovery processes. Capable of measuring up to four species simultaneously, this air demand analyzer is uniquely capable of monitoring off-ratio applications, providing accurate chemical concentration ...
-
Manufactured by Perma Pure LLC - a Halma Companybased in USA
Perma Pure’s Marine-GASS Nafion tubing based Sample Conditioning Systems is the smart solution for Marine CEMS. Designed specifically to handle harsh shipboard applications, the system ensures long term reliability of SO2 measurements according to MEPC 184(59). Because the level of SO2 is so low coming out of the scrubber, a peltier based cooler is unable to condition the sample effectively ...
-
Manufactured by SRI Instruments Europe GmbHbased in GERMANY
The SRI Heated Flash Vaporization injector is useful for applications which require flash vaporization of the sample prior to the column, such as desorption of SPME fibers or injection of extremely dirty samples where the non-volatile residue must be trapped in the injection ...
-
Manufactured by Sigma-Aldrichbased in USA
This kit was developed for sampling of nitrous oxide, isofluorane, ethrane, halothane, and sevorane in surgical theaters. Parts for one complete sampler are packed separately in one sealed and sterile bag. Pack of 10 sterile ...
-
Distributed by Integrated Scientific Ltdbased in UNITED KINGDOM
The ACCURA sampling device is designed for fully automated analysis of gaseous and pressurized liquid hydrocarbon streams for MultiTek and Gas Chromatography applications. It provides these key benefits through: Highest accuracy and precision through uncompromised sample integrity, Easy to use, Maximum operator safety, Can be used for MultiTek and GC, gas and liquids, Repeated injections in one ...
-
based in USA
The model PIRVOL IR gas monitor is designed to monitor hydrocarbon vapors in the range of 0-100% by volume, and is ideally suited for oil and gas wellhead mud-logging, hydrocarbon processing, and other extractive sampling applications. The PIRVOL provides superior life-cycle costs over destructive hot-wire measurements such as thermal conductivity and catalytic element sensors. In addition, the ...
-
Manufactured by Vapor Pinbased in UNITED KINGDOM
The barb at the top of the Vapor Pin® sampling device connects to ¼-inch sample tubing (typically Nylon or Teflon®) with softer tubing, preferably Tygon®. Because stainless steel is more durable than brass and more corrosion resistant, we recommend stainless steel for long-term installations and in corrosive environments. Brass Vapor Pin® sampling devices are less durable ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you