Vertical Profiling Equipment For Monitoring And Testing Available In Asia & Middle East
-
PremiumManufactured by Qingdao Leice Transient Technology Co., Ltd.based in CHINA
Based on the principle of optical pulse coherent Doppler shift detection, Wind3D 6000 can realize the fine detection of the 3D wind field of the middle and lower troposphere (including the atmospheric boundary layer). Highly pointed precision optical scanning mirror for 3D scanning detection. (DBS/VAD/PPI/RHI/CAPPI fixed-point scanning mode), the detection radius can be up to 6km. In order to ...
-
PremiumManufactured by Qingdao Leice Transient Technology Co., Ltd.based in CHINA
Based on the principle of optical coherence doppler frequency shift detection, the 3D scanning wind lidar Wind3D 10K can be used for monitoring, identification and early warning of low altitude wind shear, for detection of aircraft wake vortex and to enhance the separation reduction of the dynamic wake vortex. Equipped with optical scanner of highly pointing accuracy, for 3D scanning detection ...
-
PremiumManufactured by InterOcean Systems LLCbased in USA
InterOcean Systems has been building Vertical Profiling winches for decades. Our VPS winches are all custom engineered for the task at hand. InterOcean VPS winches can be outfitted with stop switches, bare drum warning systems, break-away links, and even two-way acoustic modems for real-time communication and ...
-
PremiumManufactured by Flydog Solutions OÃœbased in ESTONIA
Bottom-up profiler for demanding environment conditions. Salla is designed for all-year-round deployment. As it is anchored to the bottom then it is not affected by the weather conditions on the surface and it can be used also in areas where ice is covering the sea in wintertime. ...
-
PremiumManufactured by Qingdao Leice Transient Technology Co., Ltd.based in CHINA
WindMast 350-M is a type of pulsed coherent wind lidar for marine application, featured of small size, low power consumption and high measurement precision. It’s specially designed for the harsh marine environment, inheriting all the functional advantages of WindMast WP350. The whole machine is of air-tight design, with the protection level up to IP67 level (it can work normally after being ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
Radial displacements along vertical or horizontal measuring lines are measured automatically and continuously with inclinometer measuring chains (Clino-Chain). The Clino-Chain consists of measuring elements connected with ball joints, which can be 0.5 m to several metres long. The measuring elements are equipped with precise, long-term stable inclination sensors. The measuring accuracy in ...
-
PremiumManufactured by Qingdao Leice Transient Technology Co., Ltd.based in CHINA
The WindMast WP350 is a 'met mast replacement' type pulse coherent wind lidar. It is compact, low power, high precision and is designed and manufactured based on the IEC 61400-12-1:2017 standard. The wind speed and wind profile of any 24 height gates from 40m to 350m above the lidar can be continuously detected throughout the day. It is suitable for wind resource exploration and evaluation, wind ...
-
PremiumManufactured by Qingdao Leice Transient Technology Co., Ltd.based in CHINA
Fully auto-function lidar without environmental electromagnetic interference, can directly detect the three-dimensional wind field data of the tropopause. On basis of the doppler effect of atmospheric molecules and aerosols, it can detect the atmospheric wind profile three-dimensional wind field, temperature profile, cloud and aerosol optical properties in real time. The whole machine is designed ...
-
PremiumManufactured by Qingdao Leice Transient Technology Co., Ltd.based in CHINA
Based on the principle of optical pulse coherent Doppler shift detection, WindMast PBL can meet the high-precision and refined detection requirements of atmospheric three-dimensional wind field in the atmospheric boundary layer. Real-time output of wind profile, turbulence intensity, vertical airflow, boundary layer (cloud bottom) height, SNR (signal-to-noise ratio), backscattering intensity, ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 4 measuring elements with a measuring range of 40 cm, so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe measures with an accuracy of ± 3% in a thin-walled tube and has a ...
-
PremiumManufactured by KISTERSbased in GERMANY
The OSSB1 universal current meter is a field-proven instrument for measuring the velocity of water in open and closed channels. It is used for point measurement of flow velocity in vertical profiles and covers a flow velocity range from 0.025 to 10 metres per ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 6 measuring elements with a measuring range of 100 cm so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe measures with an accuracy of ± 3% in a thin-walled tube and has a ...
-
Manufactured by 2B Technologiesbased in USA
The 2B Technologies Model 202 Ozone Monitor™ is designed to enable accurate and precise measurements of ozone ranging from low ppb (precision of ~1.5 ppb) up to 250,000 ppb (0-250 ppm) based on the well-established technique of absorption of UV light at 254 nm. The Model 202 Ozone Monitor™ is lightweight (5.5 lb., 2.5 kg.) and has a low power consumption (12V DC, 0.60 amp, 7.2 watt) ...
-
Manufactured by Fly Dragon Drone Tech co., ltdbased in CHINA
Baby shark VTOL is a vertical take-off and landing (VTOL) aircraft is one that can hover, take off, and land vertically. This classification can include a variety of types of aircraft including fixed-wing aircraft as well as helicopters and other aircraft with powered rotors, such as cyclogyros/cyclocopters and tiltrotors.[1] Some VTOL aircraft can operate in other modes as well, such as CTOL ...
-
Manufactured by METEK Meteorologische Messtechnik GmbHbased in GERMANY
The Doppler SODAR PCS.2000 measures vertical profiles of wind and turbulence, monitors inversion layers and derives stability classes in height ranges 15 m … ≥ 1000 m. A powerful WINDOWS PC controls the sounding and processes and transfers the data. The Doppler SODAR PCS.2000 is a reliable, cost efficient tool for operational set ups and short term campaigns. The low power version of ...
-
Manufactured by The Local Exhaust & Ventilation Company Inc. (Lev-Co)based in CANADA
The 1200 VOM Oil Mist Collector produces1200 CFMwith95%+ filter efficiencyand is a direct machine-mounted, self-draining system that is designed for single-unit metalworking ...
-
Manufactured by Builtrite Handlers and Attachmentsbased in USA
Builtrite 4-Tine Orange Peel Grapples are designed with the professional scrap processor in mind to provide maximum durability and low maintenance, reducing your downtime. Key features ...
-
Manufactured by McLane Research Laboratories, Inc.based in USA
The Ice Tethered Profiler (ITP) is an autonomous time-series instrument that vertically profiles the water column under the ice. The ITP collects in situ measurements of conductivity, temperature, and depth. Data can be automatically transmitted in near real time via inductive modem when connected to a surface controller. Profiling depth, time intervals and pressure stops are user-defined, and ...
-
Manufactured by Atlas Wedge Wire Co.based in CHINA
Stainless steel (grade 304) wedge wire grilles are becoming favorite components of architectural designers. Combined with perforated metal panels or expanded metal sheets, the wedge wire grilles can be fabricated in modern airports and other buildings internal and facade ...
-
Manufactured by Beko Technologies Corp.based in GERMANY
Compressed air refrigeration dryers DRYPOINT RA HT are specially designed for high inlet temperatures up to 212 °F. With the DRYPOINT RA HT, two further components have been added to the well known DRYPOINT RA: a pre-cooler consisting of copper pipe and aluminium fins, and a pre-filter with a BEKOMAT condensate drain.DRYPOINT RA HT gives you high quality compressed air treatment in accordance ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you