Vibration Testing (Monitoring) Applications available in Germany
-
Premium
Measurements Solutions for Machined Surfaces
ZYGO 3D optical profiler products utilize non-contact coherence scanning interferometry (CSI) technology to offer precise, rapid and quantitative surface metrology of form and roughness for improved part quality and manufacturing yields. Our field-proven and innovative solutions enable our customers to control their current machining processes, while providing the insight to analyze and solve manufacturing challenges as they ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Measurements Solutions for Optical Systems
Optical systems are integral to many of the products consumers utilize every day from the compact camera lens assemblies in mobile devices to the telescopes in satellites that provide timely communications, weather and surveillance updates. Each optical system consists of multiple optical components that are designed to meet a specific level of performance when properly aligned as an assembly. Despite the differences in size and application, the metrology required for each assembly can be quite similar with ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Operational modal analysis software solution for experimental modal analysis (EMA) sector
All methods for Experimental Modal Analysis in ARTeMIS Modal are born multiple input multiple output polyreference methods. This means that the techniques are capable of estimating closely space modes and even repeated modes with a high degree of accuracy. Below there is an example of a perfectly symmetric structure where the polyreference methods have been applied on a setup with two reference accelerometers and a rowing impact hammer. ...
By Structural Vibration Solutions A/S based in Aalborg East, DENMARK.
-
Operational modal analysis software solution for operating deflection shapes (ODS) sector
Operating Deflection Shapes analysis is very beneficial in combination with Operational Modal Analysis as it determines and visualizes the combination of the actual forcing functions acting on the structure and the dynamic behavior of the structure. Results can be shown as displacement, velocity or acceleration in SI, Imperial or user-defined units. Decimation and various filters (low-pass, band-pass, band-stop and high-pass) can be applied to frequency limit the ...
By Structural Vibration Solutions A/S based in Aalborg East, DENMARK.
-
Sound instrumentation for vibration
Vibration is simply defined as the variation of an object about a fixed position. To properly define and quantify the physical characteristics of vibration, however, is much more complex - account must be taken of the direction, frequency and magnitude of vibration. Then, what properties should be measured? Is it appropriate to measure the displacement of the vibrating object as a measure of its amplitude, or should we instead measure velocity, or acceleration? What are the conventions for measuring direction, and ...
By Norsonic AS based in Tranby, NORWAY.
-
Sound instrumentation for Human vibration
Vibration is simply defined as the variation of an object about a fixed position. To properly define and quantify the physical characteristics of vibration, however, is much more complex – account must be taken of the direction, frequency and magnitude of vibration. Then, what properties should be measured? Is it appropriate to measure the displacement of the vibrating object as a measure of its amplitude, or should we instead measure velocity, or acceleration? What are the conventions for measuring ...
By Norsonic AS based in Tranby, NORWAY.
-
Noise and vibration pollution control for paper industry
The paper industry depends upon a continuous industrial process in which the paper machine is the central factor. This system is based on several variable speed rollers mounted on roller-bearing blocks, and damage to a single block can be enough to shut down production for several ...
By ACOEM GROUP based in Limonest, FRANCE.
-
Operational modal analysis software solution for structural health monitoring (SHM) sector
ARTeMIS Modal Pro has a series of plugin modules designed for Structural Health Monitoring purposes. All modules are designed to analyse and present the health of a monitored structure in various manners, and they all rely on the same common data manager base module. This module administrates the recorded measurement files as well as the results obtained during a periodic ...
By Structural Vibration Solutions A/S based in Aalborg East, DENMARK.
-
Water Pump Vibration Monitoring
The water and wastewater industry uses a large number of pumps of all sizes and ratings, along with their associated driving motors, and they are often run continuously. Monitoring the health of their bearings using vibration sensors enables faults to be detected early, reducing unplanned maintenance shutdowns and supply interruptions. Typical locations where vibration sensors can be fitted include vertical pump upper and lower bearings, horizontal pump and compressor inner and outer bearings, and thrust bearings ...
By Monitran Ltd based in Penn, UNITED KINGDOM.
-
Operational modal analysis software solution for civil engineering sector
Back in the 1980’s civil engineers were among the first to adapt Operational Modal Analysis (OMA) for testing of large structures. The size of the civil engineering structures and the fact that ambient excitation typically is uncontrollable pushed the development of OMA techniques heavily in this area. Today OMA is a wide spread technology used in many engineering field but testing of civil engineering structures is still the most popular OMA application. Back in 1999, ARTeMIS software was originally ...
By Structural Vibration Solutions A/S based in Aalborg East, DENMARK.
-
Noise and vibration monitoring for iron and steel industry
The infrastructure required by the iron and steel industry is considerable, and includes a variety of rotating machines such as pumps, fans and rolling mills. Processes and operating conditions vary according to the product worked, and may involve cyclic operations, complex facilities, and stringent security and accessibility ...
By ACOEM GROUP based in Limonest, FRANCE.
-
Noise and vibration monitoring for city monitoring
Noise has become the primary source of environmental disturbance. In 2002, the European Union took decisive action in the form of directive 2002/49/CE relating to the assessment and management of environmental noise. Through the use of strategic noise mapping, every urban community must implement an action plan to combat noise pollution. The monitoring of noise levels in urban environments is therefore an essential ...
By ACOEM GROUP based in Limonest, FRANCE.
-
Operational modal analysis software solution for harmonic detection and removal (HDR) sector
All versions of ARTeMIS Modal support the Harmonic Detection and Removal (HDR) plugin that enables detection and possible removal of harmonic components present in the response measurements used for Operational Modal ...
By Structural Vibration Solutions A/S based in Aalborg East, DENMARK.
-
Operational and Experimental Modal Analysis Software for Rotating Machinery Sector
There are different ways to handle the problems arising from the harmonic components in the vibration ...
By Structural Vibration Solutions A/S based in Aalborg East, DENMARK.
-
Noise and vibration monitoring for the construction site
By implementing a noise and vibration monitoring system, the impact of construction site activities can be managed by: Complying with legal requirements relating to public health sanctioning the absence of appropriate precautions to limit abnormally high levels of noise and vibrations. Taking environmental quality considerations into account (HQE approach). Limiting noise and vibration pollution with the comfort of neighbouring residents in mind. Enabling companies in the public works and construction industry to ...
By ACOEM GROUP based in Limonest, FRANCE.
-
Noise and vibration monitoring for nuclear power industry
The nuclear industry must increase the availability and reliability of its power stations whilst ensuring that a high level of safety is maintained. The principal weak points in achieving this objective are the industry's systems and ...
By ACOEM GROUP based in Limonest, FRANCE.
-
Noise and vibration monitoring for race circuit monitoring
Certain leisure activities, and motor sports in particular, are a source of elevated noise levels. They cause significant disturbance for nearby residents, particularly as such sites are being developed in increasingly densely populated urban ...
By ACOEM GROUP based in Limonest, FRANCE.
-
Operational modal analysis software solution for OMA sector
You might wonder what Operational Modal Analysis, OMA, is and how it differs from the traditional Experimental Modal Analysis (EMA) that has been around for the past few decades. Operational Modal Analysis is also called output-only modal analysis, ambient response analysis, ambient modal analysis, in-operation modal analysis, and natural input modal ...
By Structural Vibration Solutions A/S based in Aalborg East, DENMARK.
-
Hand-Arm Vibration Measurement
Overexposure to occupational vibration from power tools and vibrating machinery can impact the human body in several ways and cause permanent damage. The UK Health and Safety Executive estimates there could be between 2 million people at risk of ...
By Pulsar Instruments Plc based in Hunmanby, UNITED KINGDOM.
-
Noise and vibration monitoring for oil and gas industry
The oil and gas industry requires major infrastructure in terms of refineries and offshore extraction platforms which operate continuously. A large number of essential rotating machines, structures and piping networks are subjected to high levels of demand in a difficult environment, leading to the potential for ...
By ACOEM GROUP based in Limonest, FRANCE.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you