VOC Monitoring Equipment For Monitoring And Testing In Europe
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Hydroxychrom is a gas generator providing high purity (grade: 99.9995%) of hydrogen used as carrier gas or fuel gas for autoGC FID (for VOCs) and FPD (for sulfur compounds). Generator of high purity hydrogen used a carrier gas for airmoVOC and chromaFID analysers as well as for the FID flame. Hydroxychrom is a high purity hydrogen generator and an important tool for the incoming H2 of FID, FPD ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Emission Concentrator is an adsorption system designed to concentrate large volume, low concentration process exhaust into a much smaller, higher concentrated air stream. The greatly reduced flow with higher Volatile Organic Compound (VOC) concentration is sent to a thermal or catalytic oxidizer for VOC destruction. The destruction device can then be much smaller in size, significantly ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Most portable model: The smallest of Cerex’s Hound Series analyzers. The Cerex Micro Hound offers continuous parts-per-billion (ppb) level monitoring with a standard 2 meter path ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot SO2 is a robust SO2 Gas Monitor that can measure Sulfur Dioxide parameters in the air. This SO2 gas detector uses Electrochemical Sensing technology to measure total SO2 in the air. The monitor is equipped with an SO2 sensor module. The sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
microVOC is a compact VOC analyzer which allows continuous and realtime qualification and quantification of benzene, toluene, ethylbenzene, xylene and other VOC on demand. User friendly. Compact size and low weight. Deployment in less than 5 minutes. Powered by mains or battery. Low consumption of carrier gas. Rapid calibration with gaseous BTEX mixture or only Toluene. Compatibilty with ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
For the accurate and reliable monitoring of VOC concentrations, every analytical instrument needs to be calibrated periodically. Synspec supplies various multi-point calibration stations for the validation of your ...
-
PremiumManufactured by Sauereisen Inc.based in USA
FibreCrete™ Chemical and Food Grade 204 is a fiber-reinforced and chemically- resistant epoxy lining system used to protect concrete and steel from chemical and physical abuse. The interlocking fiber matrix within FibreCrete™ systems contributes outstanding flexural and tensile strengths while significantly reducing permeability. FibreCrete™ may be used in many kinds of ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
It is engineered to transform standard compressed air into a safe, regulated supply of Nitrogen and Air up to 40 l/min with a suitable LC-MS purity grade. The CASTORE XS iQ SHI with its dual Nitrogen and Air outlets has been developed to meet specific requirements in term of gas, flow, purity and pressure for Shimadzu MS instruments such as LC-MS 8040, 8045, 8050, 8060. It can be used for LC-MS ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot CO is a robust CO Gas Monitor that can measure Carbon Monoxide parameters in the air. This CO gas detector uses Electrochemical Sensing technology to measure total CO concentration in the air. The monitor is equipped with a CO sensor module. The sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Permanent Total Enclosures (PTEs) provide numerous advantages for manufacturers who paint, spray, coat or apply solvent based materials to their product. The primary function is to provide 100% capture of all fugitive over-spray of harmful air pollutants used within the enclosure, maximizing the capture and control efficiency of the facility. This results in fewer uncontrolled emissions being ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme REF-IR-ST Sensor/Transmitter is designed to detect the presence of refrigerant leaks in enclosed areas. The REF-IR-ST series employs a high-precision NDIR sensor ideal for gas-specific and accurate measurements of the most commercially used refrigerants. With its 1PPM resolution, 0-1000PPM measuring range, and operating temperature and humidity characteristics, the REF-IR-ST far exceeds ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot Cl2 is a robust Cl2 Gas Monitor that can measure Chlorine gas in the air. The Chlorine sensor module can accurately measure low concentrations of Cl2 at ppb level in the ambient air. The sensor module design is capable to monitor the Chlorine emissions from point sources on a real-time basis. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen ConoFlex Urethane No. 381.61 is an aromatic polyurethane lining that provides excellent flexibility and impact resistance for concrete, steel, and other substrates. No. 381.61 is a chemically resistant, lining combining toughness, elongation, and low permeability with a fast cure time. Typical uses: flexible lining for various applications, including primary/secondary containment ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC PID for automatic monitoring of compounds, in air, water or soils: This instrument uses a port valve with a loop, and a metallic 0.53 mm ID column. It has a minimum detection level of ppb. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data storage is integrated in a 19' rack 4U. Isothermal oven in standard (programmed ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Automatic Gas Analyzer for Volatile PAH compounds and VOCs monitoring. The airmoSCANXPERT uses a valve with a sampling trap. It also features a metallic capillary column. Its main characteristics are: Miniaturization, sensitivity, mobility and ...
-
PremiumManufactured by Jacobi Groupbased in SWEDEN
Activated carbons designed for air and gas treatment, covering a diverse set of applications including VOC abatement in air, odour control, solvent recovery, process gas purification, residential and commercial air treatment devices, cigarette filters, and cabin air filters and evaporative loss devices in automobiles. ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot NO2 is a robust NO2 Gas Monitor that can measure Nitrogen Dioxide parameters in the air. This NO2 gas detector uses Electrochemical Sensing technology to measure total NO2 in the air. The monitor is equipped with the NO2 sensor module. The sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
L × I.D. 60 m × 0.53 mm, df 3.00 μm General description Application: This intermediate polarity column, designed for analyses of volatile organic compounds (VOCs), offers great retention and resolution of highly volatile compounds. Use this column in direct injection ports or coupled to purge and trap systems. USP Code: None Phase: • Bonded • Proprietary Temp. ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
JMHW VOC Mix 1000 μg/mL in methanol, analytical ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
L × I.D. 105 m × 0.53 mm, df 3.00 μm General description Application: This intermediate polarity column, designed for analyses of volatile organic compounds (VOCs), offers great retention and resolution of highly volatile compounds. Use this column in direct injection ports or coupled to purge and trap systems. USP Code: None Phase: • Bonded • Proprietary ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you