Voltage Monitoring News

  • AQMesh measures SO2 and PM from Nicaragua volcano

    AQMesh is currently in use in Nicaragua, monitoring air quality in communities living near Masaya volcano. The six AQMesh pods have been used to show variations in volcanogenic SO2 and PM levels at different times and at different locations across the area. The pods, which have independent power and communications so they can be mounted where ...


    By AQMesh

  • UL Issues Certification of Power over HDBaseT Cables

    The HDBaseT Alliance, the cross-industry group tasked with promoting and advancing the HDBaseT standard, and Alliance Contributor member UL, the global safety science company dedicated to promoting safe living and working environments, have announced the issuance of the new Power over HDBaseT (PoH) Cable Certification to ...


    By UL LLC

  • Innecs Power Systems offers an obligation-free flue gas measurement

    Flue gas measurement Since 1 January 2017, the emission of natural gas heating units must meet the requirements of the Dutch Activities Decree (Activiteitenbesluit). The main emission requirement is < 70 mg/Nm³ bij 3% O2. Innecs offers you an obligation-free flue gas measurement, free of charge* Do you have a steam boiler or heating unit, and would you like some ...


    By Innecs Power Systems

  • Horizon Solar Power Garners the Frost & Sullivan Customer Service Award for Its Interactive Customer Service Offerings, Range of Financing Products, and Flexible Technical Solutions

    Based on its recent analysis of the solar services market, Frost & Sullivan recognizes Horizon Solar Power with the 2017 United States Frost & Sullivan Award for Customer Service Leadership. Horizon Solar Power takes the top spot in customer service with its industry-leading installation times, focus on education, and uniquely responsive client support throughout the sales cycle. While ...


    By Frost & Sullivan

  • ABB Digitalizes Critical Substation in New York City to Improve Power Supply

    ABB has completed a major upgrade of a key substation in New York City, where several conventional pieces of power equipment have been replaced with digitally-enabled technology, in collaboration with leading energy utility Con Edison. The bulk power substation, among the largest of its kind in the US, supplies electricity to hundreds of thousands of customers in lower Manhattan. The area ...


    By Smart Grid Observer

  • Introducing OptiPower - a new way of thinking with regard to Power Quality Management

    OptiPower includes everything from power quality analysis to design and implementation of power quality enhancing equipment. OptiPower’s active filter is a key component for optimal power quality. OptiPower - Power Quality System • Optimizing power quality management through intelligent analyses - from measuring to installation • Improvement or ...


    By DESMI A/S

  • Power bills set to rise by surprising 1% following latest Capacity Market auction

    The new Capacity Market surcharge will add around £378 million in total to business and home energy bills this year, increasing business energy costs by approximately 1%, according to Inprova Energy. But it's a much smaller price rise than was forecast, taking the energy industry by surprise and ...


    By Inprova Energy

  • Palas to expand product range for discharge systems for aerosol conditioning

    X-ray neutralizer XRC 049 Electrically charged aerosols can seriously distort measurement results, e.g. in filter testing. Discharge systems produce a balanced and reproducible charge distribution in the aerosol and thus enable reliable measurement data. With the new XRC 049, Palas offers a discharge system that is particularly suitable for mobile measurements. The X-ray neutralizer is ...


    By Palas GmbH

  • IPM Exhibiting at POWER-GEN 2016 in Orlando

    In-Place Machining Company invites you to visit us in Booth #4560 during POWERGEN International 2016, December 13-15 at the Orange County Convention Center in Orlando, Florida. Co-located events include Renewable Energy World International, Nuclear Power International, COAL-GEN, and GenForum. Every facet of the Power Generation industry is covered at these annual conferences for ...


    By In-Place Machining Company

  • #GivingTuesday: 5 powerful non-profit energy initiatives

    #GivingTuesday is all about the power of giving, so today we are focusing on the giving of power – to address the growing problem of fuel poverty, that is. Fuel poverty is defined by the Warm Homes and Energy Conservation act as “the condition of being unable to afford to keep one’s home adequately heated.” ...


    By DEXMA

  • North American Electric Reliability Corporation and IEEE Sign Agreement to Cooperate on Bulk Power System Analysis, Standards, Cyber Security

    The North American Electric Reliability Corporation (NERC) and IEEE recently entered an agreement to identify and launch joint initiatives on key issues, including coordination on bulk power system analysis, cyber security and the interface between NERC Reliability Standards and IEEE equipment standards. With the transformation of the North American bulk power system, cooperation and ...


    By Smart Grid Observer

  • ADVANCE RIKO Introduces `F-PEM` Atmospheric Thermoelectric Module Evaluation System

    ADVANCE RIKO, a supplier of advanced thermal management and evaluation systems, has developed a new system which evaluates thermoelectric modules (TEMs) that generate power from waste heat in the atmosphere. Based on patents developed by the National Institute of Advanced Industrial Science and Technology (AIST), the new 'F-PEM' Atmospheric Thermoelectric Module Evaluation System goes on sale ...


    By Japan Corporate News - JCN

  • Software supports Multichannel test systems and simulation

    With the latest release 2.0 of its MCM-Process RT software, Smart Testsolutions is offering numerous new features and functional enhancements. The new release now supports three CAN bus interfaces and has EtherCAT communications capabilities. In addition, the software has been enhanced to better address cell voltage monitoring (CVM). MCM-Process RT supports SMART customers implementing ...


    By Smart Testsolutions GmbH

  • Landis+Gyr Adds Active Voltage Monitoring from the Grid's Edge

    September 20, 2016 -- Landis+Gyr recently announced the addition of real-time voltage monitoring capabilities to its grid analytics suite of products. The new functionality is designed to provide utilities with improved awareness of sudden voltage variances that impact the quality ...


    By Smart Grid Observer

  • Valeport Swells Tide Measurement Offer

    Avalable to order now, the TideStation has been designed as a cost-effective turnkey solution, which ensures environmental monitoring equipment is easily and correctly installed with a durable housing to safeguard equipment and prolong performance to ensure the highest quality data. Self-contained, easy to install and ...


    By Valeport Ltd

  • Pulsar’s Ultrasonic Success with Super-light Fumed Silica Measurement

    Fumed Silica has a bulk density of around 30g/l, and a surface area of sometimes hundreds of square metres per gram. It is used as a thickening agent in everything from gel batteries to non-drip paint, as a light-scattering agent in cosmetics and a toothpaste abrasive. However, a material as light as this presents significant difficulties in bulk measurement. After a number of failed attempts, ...

  • Edinburgh Sensors add new ranges to CO2 IRgaskiT

    At Edinburgh Sensors, we are committed to providing solutions to satisft our customers' current needs. At the customer request, we have added new CO2 gas measurement ranges to our IRgaskiT. The IRgaskiT can now measure ranges of 0-50% and 0-100%. The IRgaskiT range of dual-beam infrared sensors offers high performance and flexibility with its modular design, comprising sensor module, sensor ...


    By Edinburgh Instruments Ltd

  • Visit IPM at HydroVision 2016 in Minneapolis

    Visit Us at Booth #1514 on July 26-29 In-Place Machining Company invites you to visit us in Booth #1514 at HydroVision 2016, July 26-29 at the Minneapolis Convention Center. HydroVision 2016 is a gathering of premier experts in the hydro power industry including many In-Place Machining Company customers. At IPM we pride ourselves on providing our ...


    By In-Place Machining Company

  • Romax collaborate with Technical University Darmstadt to develop a simulation model to predict gearbox efficiency

    Romax is supporting a PhD student from the Technical University Darmstadt in Germany on a project to develop a model that predicts the power loss of a complete transmission. Every company within the automotive industry use their own methods to identify power loss. Developing a standard model that can simulate overall and individual power losses and thus provide a method to increase the efficiency ...


    By Romax Technology Limited

  • HORIBA at Automotive Testing Expo Europe 2016

    May 31st to June 2nd in Stuttgart, Germany After the successful RDE TechDays, which were fully booked within a few days, the upcoming Automotive Testing Expo Europe 2016 at the end of May is the next event on HORIBA’s agenda. There, in a relaxed atmosphere, customers and visitors will have the opportunity to exchange information with HORIBA experts about the solutions currently available on ...


    By HORIBA Europe GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you