Vortex Flow Control Equipment For Monitoring And Testing Available In France
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
During a storm event, the high volume of flowing water can overload the sewer systems and storage basins causing an overflow to occur, flooding the entire system. The ACU-VORTEX Vortex Flow Regulator is designed to regulate the flow from entering storm water overflow systems, combined sewer overflow (CSO) systems, sanitary sewer overflow (SSO) systems, retention tank overflows and basin ...
-
Manufactured by Aliaxis Group S.A. / N.V.based in BELGIUM
The range of Marley sustainable drainage systems includes the Waterloc250 modular geocellular unit and the Flowloc control device. Waterloc250 is ideal for use in either an underground infiltration or attenuation system. 96% of the cell volume is available to store water, minimising the extent of excavation required for the ...
-
Manufactured by Veolia Water Technologiesbased in FRANCE
This regulator enables a constant flow with the high passive security of the vortex valve. Programmable control unit with remote control option. For small to medium flow ...
-
Manufactured by Mosbaek A/Sbased in DENMARK
CEH flow regulators are available with capacities from 4 l/s up to 30 l/s – see diagram. They are designed for semidry/dry installation. See also CYDK (12-60 l/s). CEH flow regulators are intended for drainage water containing sewage. All CEH flow regulators have a replaceable outlet orifice plate enabling adjustment of ± 20% of the setting giving mean capacity. For capacity ...
-
Manufactured by SpinTek Filtration, Inc.based in USA
Increase copper solvent extraction efficiency while lowering cost: Fine electrolyte filtration down to 10 microns. Organic removal down to 2 ppm. Single unit flow rates up to 660 gpm (150 m3/hr). Automatic ...
-
Manufactured by Butler Manufacturing Services Ltd. (BMS)based in IRELAND
The BMS Stormbrake is a vortex flow control device devised for flow rates ranging from 0.8 l/s to 80 l/s It is manufactured from acid resistant stainless steel (Ref 1.4404/316L) is extremely easy to install or retro-fit and is suitable for a variety of applications such as stormwater management and as part of SuDS. ...
-
Manufactured by SDS Limitedbased in UNITED KINGDOM
The rate at which water is released can be controlled by a Vortex Flow Control (VFC). SDS supplies a range of VFCs and will specify the model that best meets the specific requirements of each installation. Our Vortex Flow Control (VFC) is a self-activating device which induces a vortex motion in the flow to control the rate at which water is allowed to enter downstream drainage systems. The ...
-
Manufactured by UFT Umwelt- und Fluid-Technikbased in GERMANY
The UFT-FluidCon Vortex Flow Regulator is an automatic water flow control unit The regulation effect is simply caused by the on-destructive effects of flow. The active force of the flow resides in the differential pressure head between the inlet and outlet of the Vortex Flow Regulator. ...
-
Manufactured by ESEP Milieutechniek BVbased in NETHERLANDS
ESEP AISI 316 vortex flow control, series CY-F, is a flow limiter. It is designed to limit the flow in overflow basins, surge basins and sewer systems (combined and rainwater) to a predefined, maximum drainage capacity. The ESEP vortex flow control consists of a durable, stainless steel (AISI 316) casing with no moving parts. At low flow rates, the vortex flow control allows the (waste) water to ...
-
Manufactured by Crown Water Ltdbased in UNITED KINGDOM
The Vortex Flow Control is a surface water regulator. It is installed in a control chamber, mounted over the Weir Wall’s preformed hole (Hole Diameter is advised on the units quotation). A sump is required below the outlet pipe with the depth advised on quotations – this depth should be sufficient to house the unit intake and allow drilling and fixing of the ...
-
Manufactured by UFT Umwelt- und Fluid-Technikbased in GERMANY
UFT-FluidCon model SUn vortex valves are designed for use in sewers. They are used as regulating devices at the outlets of combined sewage overflows, storage sewers, CSO tanks, storm retention basins, clarifier tanks, etc. In contrast to the vortex valves in a dry installation, no separate flow control shaft is required for the vortex valves in a wet installation. The vortex valve is installed ...
-
Manufactured by SpinTek Filtration, Inc.based in USA
Excellent Organic Recovery: Easily recovered organic. Five times the flow rate of SX filters. Single unit flow rates up to 3,300 GPM (750 m3/hr). Fine electrolyte filtration down to 10 ...
-
Manufactured by Crown Water Ltdbased in UNITED KINGDOM
All of our Vortex Flow Controls are individually designed to meet our client’s optimal performance criteria. Vortex Flow Controls have no moving parts to wear or fail. Our units are manufactured from stainless steel plate they will resist scour, degradation and chemical attack. A Vortex Flow Control should easily outlast the sewer in which it is installed. Removable access plate on each ...
-
Manufactured by Hidrostank SLbased in SPAIN
The flow regulators are commonly used elements to control the outlet flow from storm tanks, when its emptying is made by gravity. We have different kind of flow regulators which adapt different ...
-
Manufactured by UFT Umwelt- und Fluid-Technikbased in GERMANY
The UFT-FluidVortex-P High Pressure Vortex Flow Control is a special version of the UFT-FluidVortex Flow Control, specially adapted for extremely high pressures and very low flow rates. It is used wherever special emphasis is placed on resistance to clogging and high hydraulic resistance with low space requirements. The fields of application are in special mechanical engineering systems, e. g. ...
-
Manufactured by UFT Umwelt- und Fluid-Technikbased in GERMANY
The vertical vortex valves UFT-FluidVertic basic model VLS-A are a special form of the vortex flow control which has proven itself thousands of times over. They work without any moving parts and without external energy. The regulating effect is caused solely by the flow properties. They develop a very high flow resistance with a large open cross section. Vertical vortex valves are particularly ...
-
Manufactured by UFT Umwelt- und Fluid-Technikbased in GERMANY
In urban drainage systems, vortex throttles limit the discharge from CSOs, CSO tanks, stormwater retention basins and flood prevention basins. Due to the large open cross-sections and very effective secondary flow effects, the vortex throttle is blockage resistant. The device can therefore be used to advantage to reduce difficult-to-handle effluents loaded with solids, such as in combined and ...
-
Manufactured by UFT Umwelt- und Fluid-Technikbased in GERMANY
For smaller CSO tanks in combined systems, flow regulators for small discharges less than 25 l/s are often required. Such flow control devices must be able to detect and flush blockages automatically. The Turbo Vortex Flow Regulator UFT-FluidTurbo solves this task without external energy. In a vortex throttle housing, the stormwater drives a turbine wheel that supplies the necessary control ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you