Only show results available in Virginia? Ok

Waste Monitoring Applications

  • Stack Testing for VOC Recovery Afterburner Installation

    HAZARDOUS WASTE HANDLING INDUSTRY: Conducted on-site GC speciation of VOC constituents by Method 18 collecting samples continuously around-the-clock in large vacuum canisters in order to demonstrate compliance control of a VOC recovery/afterburner installation

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Amusement parks/arenas/tourist attractions

    Vast quantities of rubbish and waste appear rapidly in amusement parks, at major arenas or at popular tourist attractions. Litter bins are quickly overfilled, which makes the area look a mess and is inconvenient. An automated system for emptying litter bins and waste chutes enhances the environment on a number of levels.

    By Envac AB based in Stockholm, SWEDEN.

  • Water quality monitoring for semiconductor industry

    Water is fundamental to the manufacturing process in a semiconductor facility. Electronic components are rinsed or washed several times during the producing process with ultrapure water (UPW) to remove residue. Continuous monitoring of organic constituents (TOC) on the influent city water assist with UPW production. Good quality waste streams for the manufacturing process can also be monitored for reuse potential.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water quality monitoring for pulp & paper industry

    Pulp and paper waste streams are exceptionally well suited for spectral analysis due to the high concentration of UV/Vis light absorbing organics in their process water and waste streams. Continuous monitoring of the organic load by means of COD/BOD correlations will help ensure the treatment process is carried out in the most efficient way possible by optimizing aeration rates and nutrient dosing while also making sure that all the regulatory goals are met.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Online Monitoring for the Food & Beverage Industry

    Several on-line monitoring technologies such as non-destructive types have become increasingly important due to the increasing automation and the incorporation of new and more efficient processes in the food industry. Food quality and safety of food are the main points of interest. AppliTek builds and supplies the necessary analytical tools that will allow for a high throughput and a short response time to increase process efficiency and reduce waste, with seamless integration in the existing infrastructure.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Stack Testing for Cement Kilns

    CEMENT INDUSTRY: Performed RCRA Trial Burn and Comprehensive Performance Test Programs for multiple kilns firing hazardous waste fuels.

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Ortelium for improved waste collection services

    The challenges facing waste collection services range from incident and complaint management through to the need for data analysis and performance monitoring. Do you want to assess whether the test period for bio waste containers has been a success and compare the results for different areas? Do you want to visualise specific collection round information based on your SAP R/3 data pool for your reporting? Ortelium is your tool. Learn more below.

    By Ortelium based in Kiel, GERMANY.

  • Premium

    Methane and Carbon Dioxide Sensing for Landfill Applications

    Application: In March 1986 an explosion destroyed a bungalow adjacent to a landfill site in Loscoe, Derbyshire. Subsequent measurements showed that 150-200 cubic meters of gas per hour were being generated by landfill waste. This event triggered a change in the way the waste industry considered and regulated gas generated at landfill sites; resulting in the landfill regulations of 2002, and in particular LFTGN03: the Guidance on the Management of landfill Gas.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Landfill Gas Monitoring for the Bioenergy Industry

    Our range of gas monitoring instruments are used to measure the constituents of Biogas and monitor Landfill sites for Methane (CH4), Carbon dioxide (CO2), Hydrogen sulphide (H2S), Carbon Monoxide(CO) and Oxygen (O2).

    By Hermann Sewerin GmbH based in Gütersloh, GERMANY.

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR Online Odor Monitoring

    ontext & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. Odors are very distinct air contaminants as they generate nuisances. The factors playing a role in the determination of odor annoyance are: odor concentration and intensity, frequency, appreciation, duration, synergy and location. CHROMATOTEC® proposes an automatic solution to well identify the origin and the level of odors.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. At the entrance of the waste water plants, where the waste water arrives, strongly smelling and polluted air is captured and neutralised by a chemical cleaning process called ‘’Stripping’’. The correct amount of chemical products needed to neutralise the polluted air has to be calculated.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Water quality monitoring for dairy industry

    Continuous monitoring of process streams and waste streams in a dairy industry setting can provide various benefits to the operators. One major benefit is that it is possible to minimize product lost to the waste stream by means of reliable online monitoring of organics (TOC) at various points in the plant. In addition, due to the nitrogen deficient nature of milk wastes it is possible to optimize ammonia dosing by accurately and continuously monitoring the organic loads entering the waste stream.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Quantitative Analysis of Steel Using Laser Induced Breakdown Spectroscopy (LIBS)

    For steel analysis, LIBS is ideal for rapid QC (quantitative analysis and detection of contaminants) for raw materials in production, and to check the elemental composition of finished products. LIBS also offers the ability to analyze slag samples that can lead to the recovery of precious metals lost in the steel production process.

    By Applied Spectra, Inc. based in Fremont, CALIFORNIA (USA).

  • Rugged Mobile Technology for Waste Management

    Waste management is another market for which it isn`t too hard to see why ruggedness is essential. Dirty, wet, dusty conditions are an accepted part of each day in the field. Tracking carts, recording data on routes, and GPS navigation are just a few of the areas where rugged mobile computers can help get the job done easier, faster and better.

    By Handheld UK and Ireland Ltd based in Leamington Spa, UNITED KINGDOM.

  • Waste water respirometry solutions for toxicity testing

    If industrial wastewater entering a treatment works contains toxic components the rate of biodegradation will be inhibited or stop completely. This can result in failed consents and will certainly give rise to operational problems. Visible indications include deflocculation, bulking and the appearance of filamentous bacteria. Sometimes, there are no visible effects. When the sludge bacteria are inhibited, there is the possibility of toxicity carryover in the effluent that is discharged to receiving waters. With new environmental legislation being introduced, worldwide, to protect the natural environment, toxin discharge is now a serious concern for treatment plant managers.

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • X-ray fluorescence XRF analysis for environmental protection and waste management

    To meet the requirements of new regulations and to protect the environment effectively, industries need techniques that enable the analysis of elements at lowest concentration levels. Bruker X-ray fluorescence (XRF) analysis is the most suitable analytical technique for handling different kinds of materials. Bruker’s XRF, ICP-MS, GC, TOF-MS, FT-IR, CBRNE products and applications help you to monitor contaminated land efficiently and quickly, to determine hazardous elements in the air and water, as well as to classify waste material and to specify products for recycling and disposal. Whether solids, sludge, filters, liquids or powders: there is a fast and simple sample preparation technique for every material type.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Air monitoring equipments for outdoor & indoor air quality

    Gradko’s ambient air monitoring equipment is widely used to monitor both indoor and outdoor air quality. Continuous development allows us to provide equipment for a broad range of applications, covering short-term and long-term monitoring. Pollutants can be detected even at very low levels – limits of detection are typically in the low parts per billion (ppb) range.

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Waste water respirometry solutions for toxicity tracking

    If toxicity is identified in a mixed sewage entering a treatment works, the problem for the plant manager is to track and identify the source of the toxicity. This can be done by sampling the effluent stream at various points in its length. By working in a logical sequence back up the sewer network the number of samples can be minimised. This type of testing should be rigorously enforced for new product introduction by a waste producer, as well as sampling the effluents directly at source. The samples would be tested against the activated sludge of the receiving works, using the Respiration Inhibition Test or the Nitrification Inhibition Test.

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you