Wastewater Sampling Equipment For Monitoring And Testing Available In Uruguay
-
PremiumManufactured by Trace2o Ltd.based in UNITED KINGDOM
Essential water quality parameters such as pH, conductivity. TDS, dissolved oxygen and ORP are evaluated to assess water, in terms of suitability for human consumption and to determine wastewater treatment efficiency. Water samples collected for the purpose of quality testing become unstable when removed from source, which means rapid testing is essential for accuracy. On site testing therefore ...
-
PremiumManufactured by Hydro Quip, Inc. (HQI)based in USA
The NEEP ShallowTray®, invented in 1988, was the first low profile air stripper offered to the marketplace. Since then, over 4,000 units have been installed worldwide. The ShallowTray is capable of stripping many different volatile organic contaminants (view list). Over 10,000 analytical tests have been performed on the influent and effluent samples to confirm effective treatment results. ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard protocol for sampling their effluent. Possible ...
-
Manufactured by Premier Tech Water and Environmentbased in CANADA
Premier Tech Aqua provides a complete line of quality peripheral products to help with the installation and maintenance of your purification system. Our filter container, access risers, septic tank adaptor and lid are all compatible, lightweight, and easy to ...
-
Manufactured by Bioscience, Inc.based in USA
The EPA-accepted Accu-TEST COD System from Bioscience, Inc., makes determination of chemical oxygen demand (COD) as easy as 1-2-3. With the Accu-TEST COD System, testing is fast, inexpensive and simple. To determine wastewater strength, simply: Add a wastewater sample to a high-quality glass reagent tube. Digest the sample and reagent for two hours in the COD reactor. Read results on our ...
-
Manufactured by In-Situ Processbased in USA
The ChemScan MPX4 is a cost-effective multiprobe enabling easy integration with control systems and telemetry for long-term installation plus portable wireless data collection when used as a ...
-
Manufactured by Efcon Water B.V.based in NETHERLANDS
The Efcon ILS Inline Guillotine is an automatic fixed volume sampler for use on 100 % filled and pressurised effluent lines. The sampled process must be liquid, and free of air / hard solids. Designed for sampling of raw wastewater, the Efcon Inline Guillotine sampler works with a maximum process pressure of 2.5 Bar and optional up to 5 Bar. This sampling method complies to ISO 5667-2, 5667-10 ...
-
Manufactured by Exposmeter ABbased in SWEDEN
A passive, integrative tool for measuring metal concentrations in water. EWM series samplers based on DGT (Diffusive Gradient Thin Films) technology. It is a method for quantitative measurement of metals in aquatic environments. The technique is based on a simple device which accumulates trace metals on a binding agent after passage through a diffusion membrane layer. Metals can subsequently be ...
-
Manufactured by Spectra Scientific, Inc.based in CANADA
The Isco portable sampler is a programmable water sampler designed for wastewater and stormwater applications. In Standard Programming Mode, the controller walks you through the sampling sequence step-by-step, allowing you to choose all parameters specific to your application. Extended Programming Mode lets you enter more complex programs including “smart sampling” event notification, ...
-
Manufactured by Pipelife International GmbHbased in AUSTRIA
Our pipelife PRO manholes and chambers offerstrength,durabilityand resistance to abrasion and high temperatures,ensuring areliable long service life. Thanks to theirlightweight material they are veryeasy to installwithout the use of heavy machines, and provide an ideal solution for sewage and stormwater applications in various ground and water conditions. They can also be easily connected to ...
-
Manufactured by ORI Abwassertechnik GmbH & Co. KGbased in GERMANY
Automatic mobile waste water sampler for time, volume, event and flow proportional sampling of fluids. Small, compact and weatherproof, the sampler combines a variety of sampling requirements. Ideally suited for water and wastewater treatment, for industrial and field applications, as well as the sampling of surface waters. The reliable sampling technique and its ability to adapt their automated ...
-
Manufactured by Kordes KLD water and wastewater systems GmbHbased in GERMANY
The small sewage treatment plant AQUA-SIMPLEXpionier "L" is ideal for single and multi-family houses, as well as for the use in facilities with load fluctuations and increased demand on the treatment performance. The basic plant can be extended here with the respective modules. Overload storage for absorbing peak load. ...
-
Manufactured by Exposmeter ABbased in SWEDEN
A passive, integrative tool for measuring metal concentrations in water. EWM series samplers based on DGT (Diffusive Gradient Thin Films) technology. It is a method for quantitative measurement of metals in aquatic environments. The technique is based on a simple device which accumulates trace metals on a binding agent after passage through a diffusion membrane layer. Metals can subsequently be ...
-
Manufactured by WaterSam GmbH & Co. KGbased in GERMANY
For sampling from large depths. Suitable for pure/ultrapure to very dirty water/wastewater. With this sample lift system, samples can be drawn from depths of up to 30 metres. It is typically used in combination with a standard vacuum sampling ...
-
Manufactured by Efcon Water B.V.based in NETHERLANDS
Efcon Peristaltic Sampler are equipped with reliable basic hardware and standard electronics. Although the design is focussed on long term reliable sampling with minimum drop out the maintenance frequency at permanent use is absolutely higher than a Vacuum Sampler. The peristaltic sampler can take samples from open channels or wires and has a with DN 12 or DN 9 mm tubing. Commonly used on wall ...
-
Manufactured by Aquamatic Limitedbased in UNITED KINGDOM
When super-compactness combined with uncompromised sampling performance is required, the Aquacell P2-COMPACT is the perfect solution. Ideal where using and transporting Samplers between sites or for temporary compliance purposes. The P2-COMPACT is conveniently supplied with an integrated easy clean 5 litre low profile composite Sample Container. As with every Sampler in the Aquacell range the ...
-
Manufactured by Aquamatic Limitedbased in UNITED KINGDOM
The most versatile member of the Aquacell P2 Portable family. The Aquacell P2-MULTIFORM can accommodate a choice of 4 Sample Collection Vessels. Changing Sample Collection Vessels is extremely quick and simple with the Aquacell Modules 'lift-off' design The open aluminum frame structure of the Aquacell P2-MULTIFORM provides easy visual inspection of the collected samples. Users will quickly ...
-
Manufactured by Aquamatic Limitedbased in UNITED KINGDOM
Incorporated within the P2-COOLBOX is a high performance passive Sample Temperature Control facility. This ensures that the collected samples are preserved at an optimal temperature (0°C to 5°C up to 5 days) whilst awaiting collection / inspection. This is particularly useful when sampling biologically active ...
-
Manufactured by NECi Superior Enzymesbased in USA
This kit is supplied complete with all necessary reagents except for HPLC water. Use this kit for quantitative phosphate analysis of essentially any aqueous sample, from wastewater to soil and plant extracts. Simply extract solid samples using HPLC water before analysis. This test tube format kit is to be used with your UV capable spectrophotometer capable of reading absorbance at ...
-
Manufactured by NECi Superior Enzymesbased in USA
This kit is supplied complete with all necessary reagents except for HPLC water. Use this kit for quantitative phosphate analysis of essentially any aqueous sample, from wastewater to soil and plant extracts. Simply extract solid samples using HPLC water before analysis. This test tube format kit is to be used with your UV capable spectrophotometer capable of reading absorbance at ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you