Water Analyses Applications available in Virginia

  • Premium

    Process Analytics - Wastewater Applications

    Control of wastewater is increasingly becoming important to avoid potential environmental and increasing legal consequences. Accurate pH, O2, conductivity and turbidity measurements are critical in modern wastewater treatment. METTLER TOLEDO offers reliable, cost-effective solutions to control industrial effluents.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Process Analytics - Water Purification (THORNTON)

    THORNTON specializes in measurements for pure and ultrapure water treatment with parameters of resistivity, conductivity, total organic carbon (TOC), flow, pH, ORP, dissolved oxygen and ozone. THORNTON products are frequently used in semiconductor and microelectronics manufacturing, pharmaceutical and biotechnology processing, and power and steam generation, as well as food and beverage production.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Mercury analysis for wastewater

    By Analytik Jena AG based in Jena, GERMANY.

  • Premium

    Water analysis for municipal wastewater treatment

    Voltammetric determination of many heavy metals is also possible in municipal or industrial wastewater. On account of the usually high organic load the sample is usually mineralized by means of UV digestion. 

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Applications of low gas flow measurement in wastewater analysis

    Whether you are a researcher or an operator working with wastewater treatment processes, it is crucial to have access to highly accurate and precise data to get insight into the wastewater treatment processes.

    By Bioprocess Control Sweden AB based in Lund, SWEDEN.

  • Premium

    Validation of Salt Water Disposal Well Treatment Plants with Handheld Oil in Water Sample Analyzer

    Ideally, a continuous online monitor would be used for collecting data to determine upset frequencies, duration and normal conditions. Many of the SWD facilities and demonstration plants do not have a budget that allows for continuous monitoring. However, high frequency sample analysis can be performed on site, using a portable analyzer. Easy to use, low cost field analyzers, such as the TD-500D, are essential for optimizing the effectiveness of treatment systems during pilot studies and meeting a budget that includes frequent measurements.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Laboratory instruments solutions for polymer and plastics industry

    Synthetic polymers and plastics are a mainstay of modern life. Because of their versatility and physical properties, plastics and polymers have conquered nearly every aspect of human activity: airplanes and cars, packaging of all kinds, medical devices and products, electronics, and countless more – without high-quality and high-tech plastics most products we use today in everyday life would look very different. Polymer production is a demanding process in which high-purity raw materials undergo complex reactions and are turned into polymers, resins, rubbers, and gums. To make sure that the products meet the specifications, the materials and processes have to be monitored along the entire production chain. This makes the use of specific and highly accurate analytical techniques indispensable. We at Metrohm are committed to providing the instrumentation and know-how you need to solve your analytical challenges in polymer analysis.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Water Vapor Permeation Analyzers for Packaging Industry

    For packaging film barriers, the Systech Illinois range of water vapor permeation analyzers offer a wide measurement range with precision temperature, humidity and flow control. These analyzers utilise the Coulometric P2O5 sensor, which is more sensitive and stable than infra-red and does not require calibration. The P2O5 is the primary method for absolute moisture measurement.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Premium

    Oxygen Permeation Analyzers & Water Vapor Permeation Analyzers for Packaging Industry

    Systech Illinois` comprehensive permeation range includes the recently acquired Lyssy and PermMate product lines which offer precision oxygen and water vapor analysis of packaging film barriers.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Premium

    Process instrumentation and analytics solutions for water and wastewater industry

    As one of the world’s leaders in industry automation and an experienced provider of integrated technologies, we offer products and systems tailored to the requirements of the water and wastewater industry.

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).

  • Premium

    Measuring Fats, Oil and Grease (FOG) in Wastewater

    It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oil and Grease (FOG). With significant growth in the commercial food sector on top of other high FOG producing industries such as metal processors, meat packers, cosmetic manufacturers and industrial laundry establishments, the need for publicly owned treatment plants (POTWs) and industries to regulate and monitor FOG is crucial to public health. Besides clogged sewer lines, high FOG levels also disrupt the effective operation of a wastewater treatment plant. An important feature of any FOG program is locating and monitoring high oil and grease producing industries and food service establishments. InfraCal TOG/TPH Analyzers provide a simplified procedure for FOG analysis based on solvent extraction and infrared absorption which can give the regulator or operator an on-site result in less than 10 minutes.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Oil in Water Analysis for Flowback or Produced Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that can be performed by non-technical personnel. The water is mixed with the extraction solvent, shaken, and then presented to the analyze for measurement. The same InfraCal TOG/TPH Analyzer can be used for TPH in soil if a spill or pond leak occurs to determine the contaminated area. The analyzer features: -Results in under 15 minutes -Detect levels as low as 10 ppm -Portable, rugged, lightweight, easy-to-use -Battery operable -Ideal for field or lab use

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Water monitoring for the pulp & paper industry

    In the field of quality control and process control, AppliTek has developed a unique set of specific monitoring solutions in order to meet the ever-increasing demand for cost efficient paper production. Traditionally, AppliTek is also your one-stop shop for on-line analyzers with regards to environmental compliance.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Sub-ppm Oil in Water Testing

    InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings, containment ponds and remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Waste Water

    Waste water, especially industrial waste water, is the most challenging water for instrumentation. Mostly, this water is characterized by highly fluctuating loads, very high salt concentrations as well as a high particle density. Hence, the accurancy and speed of measurements depends on the measurement system itself and the oxidation technique used. Obviously, application-specific analyzers provide huge advantages against standard analyzers that are used for all applications.

    By LAR Process Analysers AG based in Berlin, GERMANY.

  • Premium

    Filtration for water testing

    Chemical purity of water is assessed for a wide variety of different chemicals depending on the type of water and applicable local legislation. 

    Chemical analysis of water can include testing for nitrogen compounds, dissolved heavy metals, and total and dissolved organic carbon.

    Common water monitoring applications include:

    • Determination of suspended solids in waterusing for example glass fiber filters.
    • Chemical analyses of for example heavy metals, dissolved organic carbons (DOC), and ions.
    • Microbiological analyses using membrane based microfiltration methods

    By GE Healthcare Life Sciences based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Permeability Testing of Medical and Pharmaceutical Packaging Industry

    The measurement of oxygen and water vapor permeation is often critical in medical and pharmaceutical applications; to prevent contamination, to extend the shelf life and potency of drugs and to ensure powders do not clog. Systech`s permeation analyzers and corresponding software conform to 21CFR Part 11.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Premium

    Industrial wastewater solutions for vehicle and transport cleaning water

    Reliable and effluent-free: VACUDEST in vehicle and transport cleaning. Means of transport have to be one thing above all else: Safe. That’s why the vehicles regularly undergo strict quality checks. They are thoroughly maintained, serviced and repaired, and this of course also includes careful cleaning. Effluent is produced which, due to the high degree of contamination, cannot be discharged into the public sewer system. It contains oil, grease, detergent and other impurities. This effluent is very expensive to dispose of. Internal treatment of such wastewater is a cost-effective alternative to disposal.

    By H2O GmbH based in Steinen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you