Water Analyses Applications in Latin America

  • Premium

    Test Kits and Photometric Methods for agriculture, in food or water analysis

    When analyzing water and food, trust plays a very important role. Only careful analysis using tests that are performed correctly and are delivering sound results will help to maintain and improve our quality of life. With ready-to-use tests and test systems from Merck Millipore, you can trust your results. Our broad product range covers everything from water analysis to the control of production process up to the measurement of special food parameters.

    By Merck KGaA, Darmstadt, Germany Office in LATIN AMERICA.

  • Premium

    Mercury determination in natural, surface, sea, drinking, bottled, mineral, and waste water by cvaas

    Introduction

    Mercury determination in natural, drinking, and waste waters is one of the most popular analyses used for environment pollution and sanitary control. Background concentrations of mercury in natural water are within several ng/l. Maximum national permissible levels for mercury in water lie in the range of 0.16–6 µg/l. For example, the following limits for mercury in drinking water are set, µg/l:
    0.5 – Japan, Russia;
    1 – Argentina,...

    By Lumex Instruments Group Distributor in COLOMBIA.

  • Premium

    Determination of aluminium in water by fluorimetric method

    Aluminium is the most abundant metallic element and its salts are widely used as a coagulation treatment agent. At the same time increased levels of aluminium may lead to renal diseases and cause undesirable color and turbidity of distributed water. There are practicable levels of aluminium in water based on optimization of the coagulation process at drinking-water plants: 0.1 mg/L or less for large water-treatment facilities and 0.2 mg/L or less for small. Lumex Instruments provides accurate and selective...

    By Lumex Instruments Group Distributor in COLOMBIA.

  • Premium

    Determination of zinc in water by fluorimetric method

    In accordance with WHO’s Guidelines for Drinking Water Quality there is no health-based guideline value of zinc in water concentration. Concentration of zinc in tap water can increase as a result of its dissolution from pipes. Also, elevated levels of zinc may be an indicator of increased concentrations of other toxic metals; thereby zinc in water analysis is an essential analytical task. Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of zinc in...

    By Lumex Instruments Group Distributor in COLOMBIA.

  • Premium

    Sialex for the Industry Application

    Our products are installed on many industrial areas and in the private household. We have also experience with fluids other than water, which will receive more attention in the future. Industry is asked to consider many operational issues. There is a drive to reduce the “carbon footprint”, costs must be tightly controlled in the face of rising energy costs, “downtime” of systems must be minimised to gain the most “return on the capital investment in plant and machinery”....

    By Phoenix Ring Manufaktur UG Distributor in La Habana, CUBA.

  • Premium

    Portable and fixed gas analysers for sewage / waste water treatment AD

    AD of human waste has been common in many countries for years but increasing energy costs now drive efficiency. Sewage processors are large energy users and AD can offset and help manage this.

    By Geotech Distributor in Valinhos, BRAZIL.

  • Premium

    Mercury determination in natural gas

    Introduction

    The natural gas is a significant source of ingres s of mercury in the environment. The typical mercury concentration in natural gas may vary from 0.01 to 200 μ g/m3 . Mercury, being present in hydrocarbon gas, initiates corrosion of pipelines and catalyst poiso ning during gas transportation and processing, and these effects have serious implications for the gas-processing industry.

    By Lumex Instruments Group Distributor in COLOMBIA.

  • Premium

    Determination of boron in water by fluorimetric method

    Introduction

    The method is designed to measure mass concentration of boron in samples of natural, drinking, and waste
    water by fluorimetric method using the FLUORAT®-02 analyzer.

    By Lumex Instruments Group Distributor in COLOMBIA.

  • Premium

    Water analysis for municipal wastewater treatment

    Voltammetric determination of many heavy metals is also possible in municipal or industrial wastewater. On account of the usually high organic load the sample is usually mineralized by means of UV digestion. 

    By Metrohm AG Distributor in Quito, ECUADOR.

  • Premium

    Determination of anionic surfactants in water by fluorimetric method

    Anionic surfactants (A-SAS) represent, by volume, the most important group of surfactants used in cleaning products and the oldest and the largest volume anionic surfactant is soap. In concentrations 0.1 ~ 1.0 mg/L A-SAS become toxic for aquatic environment. Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of anionic surfactants in water samples using the FLUORAT-02 analyzer. The method became the Interstate standard for anionic surfactant in water...

    By Lumex Instruments Group Distributor in COLOMBIA.

  • Premium

    Determination of nitrites in water by fluorimetric method

    Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of nitrites in water samples using the FLUORAT-02 analyzer.

    By Lumex Instruments Group Distributor in COLOMBIA.

  • Premium

    DETERMINATION OF TOTAL PETROLEUM HYDROCARBONS (TPH) IN WATER BY FLUORIMETRIC METHOD

    Total petroleum hydrocarbons (TPH) is a term used to describe a large family of several hundred chemical compounds that originally come from crude oil; the main and most specific part of these compounds are non-polar and slightly polar hydrocarbons of the aliphatic, aromatic and alicyclic structure. These compounds are harmful to humans and animals if absorbed through the skin, ingested, and inhaled thus claiming the analytical control of THP content in water as a global issue. Quantification of TPH in water is...

    By Lumex Instruments Group Distributor in COLOMBIA.

  • Premium

    Laboratory instruments solutions for polymer and plastics industry

    Synthetic polymers and plastics are a mainstay of modern life. Because of their versatility and physical properties, plastics and polymers have conquered nearly every aspect of human activity: airplanes and cars, packaging of all kinds, medical devices and products, electronics, and countless more – without high-quality and high-tech plastics most products we use today in everyday life would look very different. Polymer production is a demanding process in which high-purity raw materials undergo complex...

    By Metrohm AG Distributor in Quito, ECUADOR.

  • Premium

    Applications of low gas flow measurement in wastewater analysis

    Whether you are a researcher or an operator working with wastewater treatment processes, it is crucial to have access to highly accurate and precise data to get insight into the wastewater treatment processes.

    By Bioprocess Control Sweden AB Distributor in BRAZIL.

  • Premium

    Measuring Fats, Oil and Grease (FOG) in Wastewater

    It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oil and Grease (FOG). With significant growth in the commercial food sector on top of other high FOG producing industries such as metal processors, meat packers, cosmetic manufacturers and industrial laundry establishments, the need for publicly owned treatment plants (POTWs) and industries to regulate and monitor FOG is crucial to public health. Besides clogged sewer lines, high FOG levels also disrupt the effective operation of a...

    By Spectro Scientific Distributor in São Paulo, BRAZIL.

  • Premium

    Oil in Water Analysis for Flowback or Produced Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that...

    By Spectro Scientific Distributor in São Paulo, BRAZIL.

  • Premium

    Water monitoring instruments by waste water testing

    Waste water is one of the most important environments to monitor. Increasingly strict regulations require cleaner waste water discharges into both watercourses and sewer systems. Monitoring waste water before discharge allows you to detect any potential pollutants and trigger re-treatment, so that these can be removed. Aquaread designs and manufactures a range of water testing equipment that is ideal for various environments and deployments.

    By Aquaread Limited Distributor in Cidade Nova Indaiatuba – SP, BRAZIL.

  • Water Vapor Permeation Analyzers for Packaging Industry

    For packaging film barriers, the Systech Illinois range of water vapor permeation analyzers offer a wide measurement range with precision temperature, humidity and flow control. These analyzers utilise the Coulometric P2O5 sensor, which is more sensitive and stable than infra-red and does not require calibration. The P2O5 is the primary method for absolute moisture measurement.

    By Systech Instruments Ltd Distributor in ARGENTINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you