oil-water separator tank Articles
-
Skimall Oil Skimming Systems
For over 12 years, SkimTech’s Skimall Tube Type Oil Skimmers have solved industrial oils, grease and fats problems. Used by companies throughout the world, SkimTech’s hard-working oil skimmers can be found in applications from large indoor and outdoor oil/water separators to small settling tanks. Our customers have found the reliable operation and ease of maintenance make them ...
-
Skyharvester UNUM Insurance case study
Objective: To reduce municipal water usage at UNUM’s new Corporate Headquarters site in Chattanooga, TN. Site Specifications & Known Requirements: Harvested water usage to be 100% irrigation. Urban location Average gallons of water needed per week: 7,950 Maximum gallons of water needed during peak summer weeks: 9,750 Parking Lot surface area: 1.64 acres of drainage area (92,000 ...
-
Quaker oats uses skimmer to reduce wastewater BOD
The Quaker Oats plant in Peterborough, Ontario, Canada produces some seven million cases of Harvest Crunch® cereal and cake mixes annually. In the process, residue from the conveyors, dryers and other processing equipment ends up on the floor. Periodic equipment washdowns add water to the solid and liquid residue, which contains edible fats, starches and sugars. During house-cleaning operations, ...
-
Class A Wastewater Treatment Facility
Industrial Wastewater Treatment Case Study Class A Industrial Wastewater Treatment Plant Settling Time Reduced From Twelve Hours to 30 minutes! This facility receives and treats oily wastewater from industrial clients. The water is treated with an initial oil/water separator, collected in a reaction tank where Floccin-J is used at a dosage of 325 lbs/18,000 gallons, then dewatered using a ...
-
Use of drone to measure odor gases in a refinery plant - Case Study
The objective of this study was to identify and quantify odor sources throughout the production process of an oil refinery located in Rio Grande do Sul State, Brazil. The oil refinery process 32,000 m³ of crude oil per day to supply the regional market. The main produced products are diesel fuel, gasoline, gas, fuel oils, aviation fuel, solvents, asphalt, coke, sulfur and propene. ...
By ENVEA
-
Visit Oil Skimmers, Inc. at PMTS 2019 in Cleveland
Presented by the Precision Machined Products Association and co-presented by Production Machining, Products Finishing and Modern Machine Shop, the Precision Machining Technology Show (PMTS) is the only show in North America dedicated to the precision machining industry. PMTS brings together more than 300 exhibitors and 6,000 manufacturing professionals to address product technology, process ...
-
Class A Industrial Wastewater Treatment Plant
Settling Time Reduced From Twelve Hours to 30 minutes! This facility receives and treats oily wastewater from industrial clients. The water is treated with an initial oil/water separator, collected in a reaction tank where Floccin-J is used at a dosage of 325 lbs/18,000 gallons, then dewatered using a filter press. The results of the preliminary tests with just ...
-
Industrial Wastewater Treatment Facility
Industrial Wastewater Treatment Success Stories Industrial Wastewater Treatment Facility This facility receives and treats oily wastewater from industrial clients. The water is treated with an initial oil/water separator, collected in a reaction tank where Floccin-J is used at a dosage of 325 lbs/18,000 gallons, then dewatered using a filter press. The results of the ...
-
Case Study: Oil-Water Interface Detection
A well site required a reliable, low-maintenance solution to monitor the interface between oil and water in a crude tank. Crude oil is temporarily stored in tanks onsite before being transported to the refinery for processing. Crude oil extracted from the oil wells contains water and other impurities. Efficient onsite separation is essential for maximizing the yield of valuable product sent to ...
-
Water Treatment - Torry Quay
The Client: Civils Contractor The Challenge: Following identification of heavy hydrocarbon impacted water during de-watering works, Soilutions were contacted to provide a solution. Impacted waters comprised significant free phase oil on the surface, significant dissolved phase oils, and unknown sediment loading. Requested flow rates were 60m3/hr. Supervision was requested to be at a minimum. ...
-
Skimming Oily Wastewater
As large generators of oily wastewater tighten effluent controls, the U.S. Environmental Protection Agency (EPA) is targeting smaller generators. Some of the firms receiving their attention are smaller manufacturing plants, automotive garages, mobile equipment service shops and truck farms. Many of these firms do not have access to a sanitary sewer system that will accept oily wastewater. Because ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you