Water Level Monitoring Equipment For Monitoring And Testing Available In Romania
-
ShowcaseManufactured by ForeverPure Corporationbased in USA
One metering injection system will be supplied for controlling different elements in the feed water of the RO plant. The metering pump will allow controlling of different functions such as the stroke length and percentage rate. The Chlorine Dosing System adds chlorine to feed water source, protecting the system from ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-BEND Overflow Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The TRU-BEND’s unique and extensively tested design operates by only allowing any excess water in the system to ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
A low energy wet scrubber is a simple versatile air pollution control device that controls gaseous emissions through contact between the exhaust gases and injected water. Within the scrubber hot flue gases are rapidly cooled by atomised water in-jected at pressure through one or more spray nozzles. Dust particles (particulates) within the gas stream are captured within water droplets and are ...
-
PremiumManufactured by Trace2o Ltd.based in UNITED KINGDOM
The Trace2o Leadometer is a fully portable kit that allows analysis of lead in water on site, detecting levels as low as 5ppb. The lightweight, waterproof unit is capable of producing fast and accurate results that align with USEPA and ASTM approved methods. The kit comes complete with all reagents required for 200 tests, which once performed, produce zero residual waste that can harm the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The ergonomic hand auger set for heterogeneous soils is used to carry out manual drilling and sampling in a great variety of different soils in an ergonomically sound way. It is particularly suitable for general soil investigation (description of the layering, geology, archaeology) as well as taking samples for such activities as environmental research. It can carry out drillings to a depth of 5 ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Water Level Meters provide reliable and accurate measurements of groundwater levels. Water level readings are taken at the top of the casing with accuracy to within 1/100 of a foot (3mm). They utilize a durable polypropylene storage reel with a rugged solid aluminum frame. Their highly accurate Polyethylene-coated steel tape is available in either standard/English or metric unit increments. ...
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Practical data transmission via radio network. The radio devices of the DFM family (DFM 433, DFM-E 433, DFM-EA 433) allow an easy setup of radio paths for the connection of measuring spots to a central data acquisition. They can also be used as a cost efficient alternative instead of a complicated cable setting for example in between the sensor and the data collection station (e.g. water level ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-PRO Overflow Measuring Profile System is designed to improve a weir’s hydraulic capacity and to accurately measure its overflow discharges. The ACU-PRO’s unique and extensively tested design utilizes the upstream and downstream water levels in conjunction with the flow curve to accurately monitor and record the overflow discharge at ...
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Discharge measurement for open rivers with external water level data. Innovative radar sensor for non-contact discharge measurement of rivers, open channels and canals with the possibility to use and integrate external water level ...
-
PremiumManufactured by Zetaş Kimyabased in TURKEY
Modular Tank Water Treatment Systems: Upper Level Electrode, Tank Top Manhole Cover, Tank Water Level Indicator, Overflow Pipe, Ladder, Tank Modules Connected to Each Other with Bolt Nut, Edipian Rubber Gasket and Special Silicone Between Modules, Under Tank Concrete or Steel Base, Bottom Tank Cover Bolted Gasket, Tank Relief Valve, Bottom Level Electrode. ...
-
PremiumManufactured by Labconco Corporationbased in USA
The CApture BT is a spacious Cyanoacrylate (CA) evidence fuming chamber with a durable, easy-to-clean stainless steel liner. It is designed with input from Forensics Experts to protect you and your ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Water level logger type TD-Diver for measuring and recording groundwater levels/temperatures. Range 10 m, -20 till +80 °C. Memory 72000 measurements (and 72000 backup). Dimensions 22 x 110 mm. Pressure sensor: ceramic. Housing: stainless steel 316L. Accuracy 0.05%/10 m, + 0,1 °C, temperature compensation 0/+40 °C. Warranty 1 ...
-
PremiumManufactured by KISTERSbased in GERMANY
HyQuest Solutions’ vented hydrostatic pressure sensor VHPS is a programmable submersible level transmitter for measuring water level and temperature in groundwater and surface water. It is low power, robust, and especially designed for use in harsh environments, ensuring longterm measurement ...
-
PremiumManufactured by Zetaş Kimyabased in TURKEY
Since the structure of cylindrical water tanks is very durable, it does not contain tension and reinforcement that may cause problems in the future. It is one of the best alternatives for large capacity warehouses. It is manufactured using bolts, nuts and epidiene gaskets in its connections. Since all parts used are the same, there is no spare part problem. The cylindrical modular water tank can ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Durable and robust water level and datalogger. Housing is corrosion proof. Conductivity range of 0 to 120 mS/cm. Long-term solution for monitoring saline environments. Available in various measuring ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
For easy installation of hydrostatic sensors. The mounting accessories allow the quick and easy installation of hydrostatic level pressure sensors. The solid high-quality accessories are made of stainless steel 1.4571 and are suitable for indoor and outdoor ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The FSI WAVE-TIDE-PLUS is an economical wave and tide monitor, combining a highly stable pressure sensor and state-of-the-art electronics to achieve unprecedented levels of accuracy and stability. Sampling rate is selectable (1 to 5 Hz), which enables the user to acquire accurate point-spectra of waves. Pressure sensor output can also be integrated to obtain water level measurements unaffected by ...
-
PremiumManufactured by KISTERSbased in GERMANY
The iLevel-GW Nano is an absolute pressure groundwater data logger for measuring and storing water pressure and temperature. By means of a steel cable the iLevel-GW Nano is lowered in the water level pipe and fixed below the lowest water ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Accurate and portable. F&J's line of digital air flow calibrators provide accurate, reproducible readings of flow, barometric pressure and temperature. Calibrated using NIST traceable standards. Standard accuracy is 2% and units with an accuracy of 1% are ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you