Only show results in Connecticut? Ok

water level probe (Water Level Monitoring) equipment

  • Water Level Recorder with Pressure Probe

    Water–Level values are measured by an oil free titanium reference pressure measuring cell which senses a hydrostatic pressure of the water column by a pressure with a capacitive diagram and converts this value into an electrical signal.Then measuring values are stored in data logger which is built into the body of the pressure probe. The ...

    By Akim Hydrometry based in Seyhan, TURKEY.

  • Premium

    LMP 808 - Model LMP 808 - Hydrostatic Level Probe LMP 808

    The separable plastic probe is designed for level measurement of water, waste water as well as fuels and oils. Basic element is a piezoresistive stainless steel sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembl with a connector and can be changed easily.Features:- nominal pressure: 0 ...

    By BD|Sensors GmbH based in Thierstein, GERMANY.

  • Premium

    DCL 571 - Model DCL 571 - hydrostatic level probe DCL 571

    The stainless steel probe DCL 571 with RS485 interface uses the communication protocol Modbus RTU which has found the way inindustrial communication as an open protocol. The Modbus protocol is based on a master slave architecture with which up to 247 slaves can be questioned by a master – the data will transfer in binary form. The probe was ...

    By BD|Sensors GmbH based in Thierstein, GERMANY.

  • Premium

    BD|Sensors - Model LMP 808 - Stainless Steel Sensor and Separable Plastic Probe

    The separable plastic probe is designed for level measurement of water, waste water as well as fuels and oils. Basic element is a piezoresistive stainless steel sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembl with a connector and can be changed easily.

    By BD|Sensors GmbH based in Thierstein, GERMANY. from Level - Submersible Probes - Industry Product line

  • Premium

    Eijkelkamp - Model GDT Prime Plus - Water Level Logger and Water Quality Probe

    Connect your sensors, like a water level logger and water quality probe, to our new GDT Prime Plus and transmit sensor data to anywhere in the world. Our GDT Prime Plus modem is designed for extended use in the field and to send water level, temperature, conductivity, rainfall, soil moisture and various water quality data in a secure way.

    By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Sensors & Monitoring Product line

  • Solinst - Model 201 - Water Level Temperature Meter (WLT)

    The Model 201 Water Level Temperature (WLT) Meter is ideal for measuring static water levels, as well as profiling temperature in wells, boreholes, tanks and open water.Accurate temperature measurements are clearly displayed on an LCD readout on the faceplate, from -20ºC to +125ºC.Water level and probe depth measurements are read off the Solinst ...

    By Solinst Canada Ltd. based in Georgetown, ONTARIO (CANADA). from Level Measurement Devices Product line

  • Solinst - Model 101D - Water Level DrawDown Meter

    The 101D Water Level DrawDown Meter has all of the same qualities as our well-known 101 P7 Water Level Meter, with the added feature of a drawdown mode. One simple toggle switches between static water level and drawdown measurements.Water level mode allows accurate depth to water measurements in wells, boreholes, standpipes and tanks. The drawdown ...

    By Solinst Canada Ltd. based in Georgetown, ONTARIO (CANADA). from Level Measurement Devices Product line

  • Premium

    Eijkelkamp - Model GDT-S Prime Plus - For Transmitting Sensor Data

    Connect your sensors, like a water level logger and water quality probe, to our new GDT-S Prime Plus and transmit sensor data to anywhere in the world. Our GDT-S Prime Plus modem is designed for extended use in the field and to send water level, temperature, conductivity, rainfall, soil moisture and various water quality data in a secure way.

    By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Sensors & Monitoring Product line

  • Water Well Depth Indicator Probe

    The Heron Well Depth Indicator Probe is used to measure the depth of wells and boreholes. The Well Depth Indicator uses a stainless steel probe fitted with a pressure sensitive plunger attached to either the Heron dipper-T or Water Tape water level indicators. The graduated tape, with two stranded stainless steel conductors is stored on a durable ...

    By HERON Instruments Inc. based in Dundas, ONTARIO (CANADA). from Water Level Indicators N Product line

  • Water Well Casing Indicator Probe

    The Heron Well Casing Indicator Probe is used for measuring the depth of metal casing in wells and boreholes from 2” diameter and greater. The Heron Well Casing Indicator Probe is a necessary tool when decommissioning wells, installing packers and registering wells with water authorities. An audible and visual signal indicates when the metal ...

    By HERON Instruments Inc. based in Dundas, ONTARIO (CANADA). from Water Level Indicators N Product line

  • Model 101 - Water Level Meter / Sounder

    The 101 Water Level Meter with P7 Probe features an extremely durable, laser marked PVDF flat tape, with an enhanced dog bone design that is thicker, reducing adherence to the side of well casing. The PVDF flat tape is laser marked every 1/100 ft or each mm; lengths up to 5000 ft (1500 m). New flat tape has increased tensile strength and ...

    By LaGa Systems Pvt Ltd based in Hyderabad, INDIA.

  • NESA - Model STM-H2O - Monitoring System for Sea Waters and Oceans

    The STM-H2O stations for the marine and oceanographic monitoring, are a typical application of the waters monitoring on buoys, systems installed along the banks, portable systems for sampling on ships, etc. Nesa instrumentation (multiparametric probes, level sensors, etc.), made of anticorrodal aluminium or inert resin, is well suited to these ...

    By NESA Srl based in Vidor (TV), ITALY. from Complete Systems - Water Quality Product line

  • Hydraulic Profiling Tool (HPT)

    The Hydraulic Profiling Tool (HPT) now allows for economical, rapid, continuous, real-time profiles of soil hydraulic properties in fine-textured to coarse-grained material. The HPT uses a sensitive, down-hole transducer to monitor the matrix back-pressure response to water injection. The probe is advanced through the subsurface via traditional ...

    By Zebra Environmental Corporation based in Lynbrook, NEW YORK (USA).

  • GeoVista - Water Level Indicator

    The water level indicator is used to provide accurate information on the water level depth in a well

    By GeoVista based in Glan Conwy, UNITED KINGDOM. from Sondes / Probes Product line

  • Level-Trac - Model LT-500 - Low Pressure Probe Manifold to 1000 PSI WSP

    The Level-Trac Model 500 probe manifold features sturdy construction in full compliance with ASME Section 1 requirements. Each column is custom built to the customer’s individual specifications. The chamber is a custom extrusion designed to provide full probe thread engagement.

    By Quest-Tec Solutions based in Houston, TEXAS (USA). from Water Level Indicator Product line

  • PocketScope - Model TV90Pro - Endoscope Camera

    This is a real pocket size video endscope camera, its compact design allows you to coil 1m camera tube inside the product.

    By TvbTech Co., Ltd based in Bao`an, CHINA. from Budget Endoscope Camera Product line

  • EPG - Model 2-Wire - Interface Sensors

    EPG's 2-Wire Interface Sensor is a small diameter, vertically suspended, product/water sensor that incorporates a normally closed (N.C) level displacement sensor (float) with normally open (N.O.) conductivity probes. The level displacement sensor floats in both water and product. The combination of both level displacement sensor and conductivity ...

    By EPG Companies Inc. based in Maple Grove, MINNESOTA (USA). from Interface Sensors Product line

  • Heron - Model Skinny Dipper - Water Level Indicator

    The SKINNY DIPPER water level meter is equipped with a ¼” probe and a ¼” extruded polyethylene tape that is reinforced with Kevlar, making it ideal for use in narrow tubes and piezometers.

    By HERON Instruments Inc. based in Dundas, ONTARIO (CANADA). from Water Level Meters Product line

  • EPG - Model 4-Wire - Interface Sensors

    EPG's 4-Wire Interface Sensor is a small diameter, vertically suspended, product/water/air sensor that incorporates a normally closed (N.C) level displacement sensor (float) with normally open (N.O.) conductivity probes. The level displacement sensor floats in both water and product. The combination of both level displacement sensor and ...

    By EPG Companies Inc. based in Maple Grove, MINNESOTA (USA). from Interface Sensors Product line

  • PASI - Model BFK-FF - Water Level Indicator (Level & Downhole)

    Water level & downhole indicator with PVC rounded cable, four-conductors, with kevlar core and external anti-scratch protective film in transparent PUR ; Available Cable length: 30m, 50m, 100m, 150m, 200m, 300m, 400m, 500m. Rounded cable diameter: 5 mm. Graduation at 1 cm intervals (directly printed on the cable itself and protected by ...

    By PASI s.r.l. based in Torino, ITALY. from Water Level Indicator Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you