Only show results available in Connecticut? Ok

cold water meter (Water Meters) equipment

  • Cold Water Meter

    COLD WATER (max 30° C) - Water meters threaded, reed impulse transmitters (4 imp/l). ON REQUEST: 2 imp/l, 1 imp/l, 1 imp 2,5l, 1 imp 5l, 1 imp 10l, 1 imp 25l, 1 imp 50l, 1 imp 100l, 1 imp 250l, 1 imp 500l, 1 imp 1.000l.

    By Etatron D.S. S.p.A based in Roma, ITALY. from Water Meters Product line

  • Model H4000 - Cold Water Meters

    The H4000 is a horizontal Woltmann-type meter designed for installation where occasional low and moderate to high sustained flows are demanded. Accuracy is maintained in both forward and reverse flow directions and there are various register/pulser options to suit the application.

    By Elster AMCO Water, LLC based in Ocala, FLORIDA (USA). from Industrial Products Product line

  • Colberge - Model MFXK - Cold Water Meters

    The MFXK water meter model is primarily used for proportional control of dosing pumps by reed-switch. The structure built in cast iron, fully sealed, gives it a good resistance to wear and corrosion. Horizontal installation.

    By Colberge Water Systems- Enkrott based in Albarraque, PORTUGAL. from Cold Water Meters Product line

  • Colberge - Model WFXK - Cold Water Meters

    The WFXK water meter model is primarily used for proportional control of dosing pumps by reed-switch. The structure built in cast iron, fully sealed, gives it a good resistance to wear and corrosion. Horizontal, vertical or oblique installation.

    By Colberge Water Systems- Enkrott based in Albarraque, PORTUGAL. from Cold Water Meters Product line

  • Cold Water Meters

    E-Mon offers a variety of cold water meters equipped with pulse output to meet your specific application. The meters listed below are the most commonly required units, however if your specifications require something different, please feel free to contact E-Mon directly at (800) 334-3666 to specify the appropriate meter.

    By E-Mon based in Langhorne, PENNSYLVANIA (USA). from Water, Gas, and Non-Electric Meters Product line

  • Model V100 / V110 - Cold Water Meters

    The V100 (formerly PSM190) meter is a positive displacement type meter operating on the oscillating piston principle. It utilizes a piston where the water rotates in a measuring chamber, each piston revolution being equivalent to a known volume of water. The piston movement is transferred by appropriate reduction gearing to a straight reading, ...

    By Elster AMCO Water, LLC based in Ocala, FLORIDA (USA). from Industrial Products Product line

  • Cold Water Meters

    Our range of Elster, previously Kent water meters, and Itron cold water meters provide you with the very best quality at competitive prices. All are direct read meters with pulse kits, where applicable, and fittings from .5 to 4 inches. So you are guaranteed to find the right solution for your cold water system. As with any Elster meter, Kent ...

    By MWA Technology based in Birmingham, UNITED KINGDOM. from Water Meters Product line

  • Model UKMCF - Mechanical Cold Water Meter

    Accuracy according to EEC Class B. Rated to 30°C. Dry dial. Flanged connection. 2m pulse cable supplied as standard. Pressure rated to 16 Bar.

    By UK Metering based in Mansfield, UNITED KINGDOM. from Mechanical Cold Water Meter Product line

  • Micronics - Hot & Cold Water Meters

    Flow range – 30 l/h up to 3000m³/h. Pipe range – DN15 up to DN200. For Cold (30°C) or Hot (90°C) water. Screwed or Flanged pipe connections dependent on size. Hermetically Sealed Counter. For horizontal installation. Pulse output for connection to pulse counter, heat calculator or BMS System.

    By Micronics Ltd based in Bucks, UNITED KINGDOM. from Water Meters Product line

  • Model UKMC - Mechanical Cold Water Meter

    Accuracy according to EEC Class B. Rated to 30°C. Dry dial. Screwed BSP connections included. 2m pulse cable supplied as standard. Pressure rated to 16 Bar.

    By UK Metering based in Mansfield, UNITED KINGDOM. from Mechanical Cold Water Meter Product line

  • Mechanical Cold Water Meter

    EEC Class B & MID Approved (Screwed Meters) EEC Class B Approved (MID Approval Pending, Flanged Meters) European Drinking Water Approvals Rated to 30°C Dry Dial Screwed BSP Connections (15mm to 50mm) Flanged Connections (50mm to 200mm).

    By UK Metering based in Mansfield, UNITED KINGDOM.

  • Elster - Model H5000 - Woltmann Cold Water Meters

    The H5000 is the next generation of Woltmann (Turbine) bulk water meters from Elster. With a range of important features, H5000 represents the very highest performance in bulk flow water metering making it ideally suited to both billing and water distribution applications. Available in seven sizes for flow rates between 40 l/h and 200 m3/h. The ...

    By Elster Water Metering - Honeywell based in Luton, UNITED KINGDOM. from Metering Solutions Product line

  • Model H4000 - Woltmann Cold Water Meter

    The H4000 is a Woltmann-type meter designed for measuring bulk flows of cold potable water for revenue billing in commercial or industrial applications and distribution system monitoring. Available in sizes 40mm to 300mm for flow rates of between 0.35m³/h and 2000m³/h.

    By Elster Group - Honeywell based in Mainz-Kastel, GERMANY. from Water Metering Product line

  • NIK - Model 7011Е - Hot and Cold Water Meters (Electronic)

    Thick brass body, reinforcing ribs and a metal retaining ring to ensure more reliable operation of the water meter;. Nickel-plated brass to ensure corrosion resistance of flow elements contacting with water;. No magnetic coupling means the water meter is not affected by external magnetic fields; Fully compliant with DSTU 3580.

    By NIK LLC based in Kyiv, UKRAINE. from Energy Metering Devices - Water Meters Product line

  • Positive Displacement Cold Water Meter

    Elster AMCO Water's C700 oscillating piston type water meters are the most advanced design positive displacement meters available. Boasting dependability and engineering excellence, the C700 line, sizes 5/8” to 2”, can be offered with a variety of registers, pulsers and material configurations, including a choice of waterworks or NSF-61 certified ...

    By Elster AMCO Water, LLC based in Ocala, FLORIDA (USA).

  • NIK - Model 7011М - Hot and Cold Water Meters (Mechanical)

    Thick brass body, reinforcing ribs and a metal retaining ring ensure more reliable operation of the water meter;. Nickel-plated brass to ensure corrosion resistance of flow elements contacting with water;. Enhanced magnetic field protection prevents magnetic interference to maintain accurate readings;. Fully compliant with DSTU 3580.

    By NIK LLC based in Kyiv, UKRAINE. from Energy Metering Devices - Water Meters Product line

  • Model TR - Multi Jet Dry Cold Water Meter

    Multi-Jet Dry Type. 360° rotatable cover. Display on 5 drums m3 and 4 pointers for litres. Optional check valve. Magnetic field protection. Measuring range up to R80. Optional pulse, M-bus Radio frequency output. Hermetically sealed register (IP68). Brass housing. Water temperature up to 50°C .

    By Teksan based in Cekmeköy / Istanbul, TURKEY. from Cold Water Meter Product line

  • Manas - Model EMS 3-20 - Electronically Controlled Hot and Cold Water Meters

    Stray, prevent losses and fraud. Early collection of amote investment earnings would administrations. A high cost to the Administration, providing Without increasing their income. Non-payment of bills with EKS system problems completely. It is lifted away.

    By Manas based in Sincan - Ankara, TURKEY. from Smart Meters - Water Product line

  • Model TV - Multi Jet Dry Prepaid Cold Water Meter

    Multi-Jet dry type. Hermetically sealed register (IP68). Backlit LCD display. Display on 5 drums m3 and 4 pointers for litres. Optional check valve. Magnetic field protection. Measuring range up to R160. 10 Years battery life time. Radio frequency output. Brass housing. Water temperature up to 50°C.

    By Teksan based in Cekmeköy / Istanbul, TURKEY. from Prepaid Water Meter Product line

  • NextCentury - Model M201 - Multi-Jet Cold/Hot Water Meter

    These NTEP Certified Meters come in both hot and cold water models. Combine this with its full 3/4' lightweight design, reliable multi-jet technologies, and pre-wired pulse AMR connector, and you have the water metering solution of the future.

    By NextCentury Submetering Systems, LLC based in FLORIDA (USA). from M201 Meter Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you