Only show results in Virginia? Ok

Water Monitoring Applications

  • Water disinfection for the food and beverage industry

    Pure Aqua has a wide range of solutions for the varied sources of water and different types of contaminants. Pure Aqua understands the stringent potable water drinking regulations and has executed potable water projects exceeding the state requirements.  Components are specifically selected to meet NSF/ANSI 61 standard and we work closely with consultants to ensure project approval. 

    By Pure Aqua, Inc. based in Santa Ana, CALIFORNIA (USA).

  • Liquid Level Contents Gauges -

    Gauges for the Ship Building & Offshore Industries We have the following Liquid Level Contents Gauges For Ship Building & Offshore use, the G35 and G31 models meet the requirements for SOLAS for use with flammable liquids, they are type approved by Lloyds, DNV and Rina amongst others. G35 Seemag- Magnetic Gauge: Approved for use on flamable Liquids G31 Seeflex - Reflex Gauge : Approved for use on flamable Liquids G21 Marine - Tubular gauge G20 Admiralty - Tubular gauge G22 Quickmount -Tubular gauge G34 Quickflex - Reflex Gauge - We have a new brochure detailing our range of products for the marine & shipbuilding industry. View/Download this brochure: http://www.seetru.com/datasheets/gauges/Seetru_Marine_Gauge_Brochure.pdf

    By Seetru Limited based in Bristol, UNITED KINGDOM.

  • Waste water monitoring solutions for wastewater treatment industry

    Improved waste management through automation can deliver more efficient waste treatment, reduced energy and chemical consumption and improved effluent quality. The cost of treatment and trade discharge can thus be significantly reduced.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Electrical Based Tomography Systems for Multiphase Flow

    Multiphase flows are complex and unpredictable however they have a significant bearing on the safety, costs and revenues of many processes – particularly in oil and gas, but also in aerospace, chemicals and other sectors.

    By Industrial Tomography Systems plc (ITS) based in Manchester, UNITED KINGDOM.

  • Water measurement systems & sensors for status & condition-based monitoring

    We offer a variety of telemetry based solutions to monitor and control assets:

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Distributed Temperature Sensing Technology for Stream Monitoring

    Temperature is an important factor in streams ecosystems. Heat tracers have been used to characterize contaminant transport, infiltration rates and energy exchange with groundwater, the atmosphere and radiation. The dynamics of these complicated water bodies is also affected by seasonal and diurnal patterns making characterization particularly challenging. Utilizing temperature measurements that capture spatial and temporal variations at stream ecosystem interfaces provides a mechanism for detailed characterization.

    By Silixa Ltd based in Elstree, UNITED KINGDOM.

  • FEDI - Electrodeionization

    The Fractional Electrodeionization (FEDI) process is an advancement of conventional EDI. The patented dual voltage process allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant’s design economics and reliability. By incorporating a two-stage separation process with different voltages the FEDI® process is able to: Achieve a higher hardness tolerance by having distinctly different concentrate chambers with separate reject streams and thus reducing the potential of hardness scaling. Optimize power consumption by using higher electrical current only where required. Ensure the best water quality, continuously & consistently by removing a major part of the deionization load in the ‘hardness removal zone’, while residual ionic impurities are effectively removed in the ‘silica removal zone’, which stays in a polishing mode.

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Electrodeionization

    The Fractional Electrodeionization (FEDI) process is an advancement of conventional EDI. The patented dual voltage process allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant& design economics and reliability. By incorporating a two-stage separation process with different voltages the FEDI process is able to: Achieve a higher hardness tolerance by having distinctly different concentrate chambers with separate reject streams and thus reducing the potential of hardness scaling. Optimize power consumption by using higher electrical current only where required. Ensure the best water quality, continuously consistently by removing a major part of the deionization load in the hardness removal zone, while residual ionic impurities are effectively removed in the silica removal zone;, which stays in a polishing mode.

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Water monitoring for the oil&gas industry

    By IC Controls Ltd. based in Orangeville, ONTARIO (CANADA).

  • Water Data Management Solution for Groundwater Monitoring

    Deployed across all relevant sectors including landfill security, well field monitoring programs, pumping tests, and drinking water supply, KISTERS solutions can be used to measure groundwater data.

    By KISTERS AG based in Aachen, GERMANY.

  • NH3 Monitoring in Air

    NH3 (Ammonia) is a colorless gas with a distinctive pungent smell. Ammonia monitoring is essential in coal-fired power plants, where NH3 is used to reduce NOx emissions. The ammonia consumes all of the NOx, but its high concentration that is needed for these purposes also starts reacting with other things and in the process can clog up filters and cause premature failure of expensive SCR equipment and pre-heaters. Not to mention that these high levels create an irreparable damage to the environment.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Diverse Surface Treatment Technologies for Military Industry

    We have developed washing techniques and technologies for the military industry in keeping with high military standards of safety and efficiency, using water jets and the sanding power of aluminum oxide. We are currently creating an anchor profile that will allow us to file a plating patent application for an exclusive, entirely automated surface treatment which prolongs engine life in extreme conditions. At IST Pure, we also manufacture washing tunnels for the complete cleaning of military vehicles and ballistic equipment to prepare for and return from missions.

    By International Surface Technologies based in Laval, QUEBEC (CANADA).

  • Monitoring industrial trade discharge for wastewater treatement industry

    Industry has had to respond to the requirements of progressive environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide trade discharge monitoring and perform continuous water analysis for key consent parameters.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Sludge monitoring for water and wastewater industry

    Improved monitoring and automation can deliver more efficient waste treatment and reduced energy consumption and improved effluent quality. The cost of treatment and the quality of effluent discharge can thus be significantly reduced.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Water quality monitoring systems for portable water plants

    Low maintenance and reliability are key requirements for analyzers in potable water plants. Cost of ownership is another big issue.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Continuous Instream Monitoring

    Turbidity in natural waters is recognized as an important indicator of its environmental health, and because it's a good surrogate for suspended sediment, monitoring turbidity has always been the "holy grail" for hydrologists. But because of earlier technology, "turbidity" has traditionally been a "bad word". The DTS-12 turbidity sensor is the first sensor to make turbidity monitoring practical, and no longer difficult, inaccurate, expensive, or labor-intensive. Turbidity is the cloudiness or murkiness of water caused by suspended organic or inorganic materials. Turbidity in natural waters is recognized as an important indicator of its environmental health.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Premium

    Precipitation measurement

    From simple manual rainfall collection devices, electronic tipping bucket rain gauge sensors, through to fully autonomic stand alone data logging systems with telemetry for hydrological network applications.

    By Casella based in Kempston, UNITED KINGDOM.

  • Premium

    Inspection of flow measuring equipment for hydraulic inspection

    Definition of Task: Metrologic inspection of flow measuring equipment according to German self-control ordination (EKVO). Inspection of flow measurement at relevant discharge point according to German regulations.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    Core Analysis for unconventional reservoirs

    Low field Nuclear Magnetic Resonance (NMR) is routinely used in core analysis laboratories to examine the T2 relaxation time distribution of fluids in core plugs. These distributions can be interpreted to give information on: pore size distributions; permeability; total and effective porosity; free fluid index and bound water volumes. The partnership between Oxford Instruments and Green Imaging Technologies allows us to integrate hardware and software to enable any core analysis laboratory to generate these petrophysical results without the need for in-depth knowledge of NMR.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you