Water Monitoring Equipment in Ukraine

52 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Water Monitoring ×

  • In: Europe ×

  • In: Ukraine ×

HORIBA - Model FES-210L - Sanitary Conductivity Sensor (Ferrule Clamp Type)

by HORIBA Europe GmbH     Office in UKRAINE

The FES-210L Series sanitary conductivity sensors are electric sensors that target sanitation issues by employing a flat structure that keeps dirt from adhering to the tip of the sensor, and they enable continuous, high accuracy measurement in liquids of various concentrations, from purified water to cleaning solutions.

HORIBA - Model F-50 Series - Benchtop Multi-parameter Water Quality Meters

by HORIBA Europe GmbH     Office in UKRAINE

Years of HORIBA sensor technology development have reached their culmination in the form of a 46-mm diameter sensor probe: a compact monitoring solution offering high pressure tolerance, long-term continuous measurement capability and highly accurate, simultaneous analysis of 13 parameters.

HORIBA - Model OM-51 - Portable Dissolved Oxygen Meter

by HORIBA Europe GmbH     Office in UKRAINE

This field-type dissolved oxygen meter measures dissolved oxygen concentration (DO), oxygen concentration (O2), saturation (SAT.RATIO) and temperature of water solutions. It uses a laboratory sensor to enable BOD measurement. Waterproof construction enables use at virtually any measurement site. This meter is being used in research institutions, ...

Purolite - Model A520E - Nitrate Removal

by Purolite Corporation     Office in Dnepropetrovsk, UKRAINE

Purolite A520E is a macroporous strong base anion resin which is specially designed for the removal of nitrates from water for potable processes. The macroporous matrix and special ion exchange group functionality imparts ideal nitrate selectivity to Purolite A520E making this resin particularly suitable for nitrate removal even when moderate to ...

HORIBA - Model ES-51 - Portable Conductivity/Resistivity/Salinity Meter

by HORIBA Europe GmbH     Office in UKRAINE

This conductivity meter measures conductivity, resistivity and salt in water solutions. It is a field type, with a waterproof case, and is easy to hold and move. It enables anyone to conduct high-precision measurement, anytime and anywhere. Naturally it can be used by specialists at research institutions, but it can be also be used in wide range ...

HORIBA - Model HE-960HI - Sanitary Conductivity Meter (Wide-Range Type)

by HORIBA Europe GmbH     Office in UKRAINE

The HE-960HI is a wide-range type sanitary electric conductivity meter that can measure over a wide range from manufacturing water up to 500 mS/cm, and enables advanced concentration management through abundant outputs. Cleaning-in-Place (CIP) terminal management and a reduction in cleaning solutions is also achieved through accurate surface ...

HORIBA - Model OCMA-25 - Automatic Oil Content Monitor

by HORIBA Europe GmbH     Office in UKRAINE

Over the past several decades, HORIBA has designed and manufactured a complete line of high-quality non-dispersing infrared analyzers and analyzer systems. HORIBA has extended infrared gas analyzer technology to the continuous measurement of oil in water for process monitoring and waste water alarm applications. The OCMA oil content analyzers are ...

HORIBA - Model TW-100 - Water Distribution Monitor

by HORIBA Europe GmbH     Office in UKRAINE

HORIBA’s TW-100 is a process water quality measurement system designed for drinking water and water distribution plants. The TW-100 monitors turbidity, color, free chlorine and pressure. This chemical free method reduces operating costs as it requires minimal maintenance and improves process control.

OCMA - Model 550 - Oil Content Monitor

by HORIBA Europe GmbH     Office in UKRAINE

OCMA-550 to measure residual oil on components and concentrations of oil adhered on solids such as soil. Measurement can be easily made only by injecting the extracted water sample into the attached cell and setting it to the equipment. This model features a simple design which allows opening/closing of the door to setting of cell with just one ...

Swansensor - Model UP-CON1000, NPT - Conductivity Sensor

by SWAN Analytical     Distributor in Kiev, UKRAINE

Two-electrode conductivity sensor for the continuous measurement in water/steam cycle applications. Conductivity sensor with stainless steel body, titanium electrode and built-in temperature probe for automatic temperature compensation. Recommended measuring range: 0.055 to 1'000µS/cm.

SWAN - Model AMI pH/Redox - Electronic Transmitter and Controller for the Continuous Measurement

by SWAN Analytische Instrumente AG     Distributor in Kiev, UKRAINE

Electronic transmitter/controller for the continuous measurement of the pH value or Redox (ORP), sample temperature and flow in water.

HORIBA - Model HC-300F - Two-Wire Transmitter

by HORIBA Europe GmbH     Office in UKRAINE

Suitable for fluoride ion monitoring in effluent from factories, e.g., those of semiconductor FPD and glass manufacturers. 0 to 10,000 mg/L wide measuring range (10-range switching).

HORIBA - Model HC-200F - Four-Wire Analyzer

by HORIBA Europe GmbH     Office in UKRAINE

Suitable for fluoride ion monitoring in effluent from factories, e.g., those of semiconductor FPD and glass manufacturers. 0 to 10,000 mg/L wide measuring range (10-range switching).

HORIBA - Model W-20 Series - Water Quality Monitoring System

by HORIBA Europe GmbH     Office in UKRAINE

Water is as precious as life itself. That's why current threats to water supplies make water quality analysis vital to our very existence. HORIBA has created the Multifunction Water Quality Monitoring System. Years of HORIBA sensor technology development have reached their culmination in the form of a 46-mm diameter sensor probe: a compact ...

HORIBA - Model HT-110 - Online TOC-Analyzer

by HORIBA Europe GmbH     Office in UKRAINE

The continuous online TOC-Analyzer HT-110 is suitable for the measurement ot total organic carbons in Purified Water (PW), Water For Injection (WFI) and Highly Purified Water (HPW). The unit is operating according to USP 643. It is applicable for pharmaceutical and/or semiconductor manufacturing. The measuring principle is based on UV-Oxidation ...

Swansensor - Model UP-CON1000, SL - Conductivity Sensor (Slot-Lock Adapter)

by SWAN Analytical     Distributor in Kiev, UKRAINE

Two-electrode conductivity sensor for the continuous measurement in water/steam cycle applications. Conductivity sensor with stainless steel body, titanium electrode and built-in temperature probe for automatic temperature compensation. Recommended measuring range: 0.055 to 1'000µS/cm.

HORIBA LAQUA - Model F-70 Series - Benchtop pH/Water Quality Analyzer

by HORIBA Europe GmbH     Office in UKRAINE

An Industry First intuitive control with the large capacitance touch panel. If problems occur during calibration or measurement, navigation will walk you through until the problem is solved. Easy to clean glass top and round body. LAQUA is both easy and fun to use!.

Optiflux - Model 2000 - Electromagnetic Flow Sensor

by Krohne Messtechnik Gmbh & Co. KG     Office in Kiev, UKRAINE

The OPTIFLUX 2000 electromagnetic flow sensor is the optimum solution for water and wastewater applications. Its long-term reliability and durability make it the standard flow sensor for the water industry for measuring abstraction water, drinking water, wastewater, sewage and effluent.

HORIBA - Model ESH-01-C-SN - Sanitary Conductivity Sensor for Low Concentrations

by HORIBA Europe GmbH     Office in UKRAINE

The ESH-01-C-SN conductivity sensor, which is used in conjunction with the HE-960CW conductivity converter, is ideal for controlling conductivity in the purified water, pasteurized water, and water for injection that are used in the production of pharmaceuticals.

Promag - Model W 400 - Electromagnetic Flow Measuring System

by Endress Hauser Instruments International AG     Office in Kyiv, UKRAINE

The flowmeter with integrated web server and a sensor with EN ISO 12944 corrosion protection. 'Promag W is the specialized sensor for all applications in the water industry. Combined with Proline 400, the transmitter optimized for the measurement of water and wastewater, Promag W 400 will be the ideal solution for any application in this industry. ...

Need help finding the right suppliers?

Let the XPRTs do the work for you