peristaltic pump tube Articles
-
Get high quality samples with your drive-point Piezometer
The results from short-term and long-term groundwater monitoring studies have shown that samples taken from Direct Push wells are comparable in quality to those obtained from conventional monitoring wells (ITRC, 2006). Solinst offers the Model 615 Drive-Point Piezometers that can be driven into suitable soils for groundwater sampling up to 20 to 25 ft. (6 – 7.5 m). High quality samples ...
-
Determination of micro and macro elements in waters with the ELAN DRC-e
The ability of reaction cell technology to reduce the effects of spectral interferences is well-known, but another, lesser-known capability also exists: extending the dynamic range. This is accomplished by adjusting the bandpass parameters with no gas in the cell. Because the bandpass parameters can be adjusted on a per-mass basis, sensitivity can be reduced on selected isotopes without affecting ...
-
Industrial Peristaltic Pumps reduce the cost of ownership for paper and packaging manufacturer - Case Study
Challenge A leading paper and packaging manufacturer in Australia was using Air-Operated Double Diaphragm (AODD) pumps to deliver 4-colour ink to its printers. The on-site AODD pumps were using considerable amounts of compressed air and required constant maintenance due to the wearable parts (seals and valves). This was resulting in unacceptable long downtimes and high cost: for repair and ...
-
T-Alimen Food and Beverage Grade Tubing
Made exclusively by Randolph Austin since 2009, *T-Alimen™ is a food grade tubing made form a TPV material that is designed to maximize its performance in a peristaltic pump. T-Alimen™ is a food grade alternative to **ED-Plex. T-Alimen™ is manufactured using a TPV (Thermoplastic rubber vulcanizate) material that is a blend of materials designed to maximize its performance within ...
-
Tubing, Uncategorized
Cilran Tubing is made exclusively by Randolph Austin Company. Developed in the 1980’s to offer our customers an alternative to rubber tubing, Cilran is manufactured using a TPE material that is blended on site and designed to maximize its performance within a peristaltic pump application. Randolph Austin has selected the raw materials for Cilran because of the ball and chain structure ...
-
Syringe Pumps vs Peristaltic Pumps - Case Study
Introduction Different applications require a pump, among all the options peristaltic and syringe pumps, are the most suitable. However, selection of the best is always a disjunctive. In general terms, laboratory and industrial process use peristaltic pumps. A user needs to know more about the systems and proper comparison of these technologies. In some cases is difficult to understand what are ...
By Chemyx Inc
-
Purifying wastewater with Peristaltic Industrial Tube Pumps - Case Study
The Challenge A leading multi-national electronics company with numerous plants across South Korea has for many years been using Metering pumps for dosing Aluminium Sulphate in their wastewater treatment facilities. The plant engineers approached the local Verderflex distributor Dong-Il Ent Co Ltd, looking for a solution to the following problems Inconsistent dosing of Aluminium Sulphate ...
-
Peristaltic pumping in dairy CIP system - Case Study
Challenge One of the largest UK manufacturers of fresh dairy products for the food industry was using air diaphragm pumps to dose peracetic acid into the final rinse water of both raw and finished CIP (Clean-in-place) routines. CIP (Cleaning-in-place) is a critical hygiene process that helps to maintain the hygienic condition of the process line without the need for dismantling of the pump and ...
-
Peristaltic Pumping in Dairy CIP System - Case Study
Challenge One of the largest UK manufacturers of fresh dairy products for the food industry was using air diaphragm pumps to dose peracetic acid into the final rinse water of both raw and finished CIP (Clean-in-place) routines. CIP (Cleaning-in-place) is a critical hygiene process that helps to maintain the hygienic condition of the process line without the need for dismantling of the pump and ...
-
Peristaltic pumping in dairy CIP system - Case Study
The Challenge One of the largest UK manufacturers of fresh dairy products for the food industry was using air diaphragm pumps to dose peracetic acid into the final rinse water of both raw and finished CIP (Clean-in-place) routines. CIP (Cleaning-in-place) is a critical hygiene process that helps to maintain the hygienic condition of the process line without the need for dismantling of the pump ...
-
Peristaltic Pumps - A lot more than just heavy duty
By design, the peristaltic pump is ideal for the dependable handling of abrasive, corrosive, viscous, high density and high solid content fluids. It thrives in those applications where other types of pump fail. Water and waste water industries, mining and chemical processing are all prime markets for this workhorse. But being equal to the tough demands of these applications is far from its only ...
-
Whole Life Costs and pumping Technology – Peristaltics Increasingly Out on Top
Untitled Document Whole life costs are playing an ever-more important role in pump selection by the water and wastewater industry. Interestingly, energy use is no longer the benchmark for making efficiency and cost comparisons, according to Philip Bolton, water industry specialist at Watson-Marlow Bredel. For engineers and plant managers in the water industry, pump selection has ...
-
Five Good Reasons to Choose a Randolph Peristaltic Pump
Peristaltic pumps work by compressing a flexible tubing or hose with rollers or cams against a rigid housing. As the tubing recovers its original shape, it creates a vacuum which lifts a fluid or gas into the tubing. A positive displacement pump, it moves the fluid or gas in discrete slugs between the rollers. There are many reasons to choose Randolph pump. Listed below are the top five ...
-
Act now to beat EU changes to wastewater treatment regulations
Introduction Over the past few months, signals have been emanating from Brussels that hint at tighter wastewater treatment regulations. For instance, not only has Carlos Moedas, EU Commissioner for Research, Science and Innovation, recently been calling for better treatment systems for wastewater, but former Environment Minister, Janez Potočnik, has backed a Friends of the Earth report ...
-
Tubing burst pressure
Randolph Austin peristaltic pumps offer the unique ability to transfer materials without coming in contact with the pump. In a sense, the tubing is the heart of the pump. Using the wrong tubing for an application and you may have a ruptured line with a mess to clean up; selecting the right tubing for the job, results in a better experience. Of the many factors to consider in any application of ...
-
Using respirometry for energy optimization in a nitrifying biological wastewater treatment system
Many wastewater treatment plants use more than 50% of their total energy budget in the aeration basin and, when nutrient removal is included in the activated sludge process, it is very common that the majority of oxygen uptake goes to the nitrification process. For that reason, in most wastewater treatment plants, energy optimization is focused on nitrification management. This information can be ...
By SURCIS, S.L.
-
The Alternative to Pump and Treat
Sometimes, an important technological advance begins with a small step – back! Such is the case with remediation of hydrocarbons from groundwater utilizing existing recovery and monitoring wells. For the past few years, state government has based decisions on the amount of clean up that they require by the risk posed to the environment. Risk Based Corrective Action, commonly called 'Rebecca' ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you