Environmental Industry Equipment In Colorado
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in dirty water, measuring a TSS range of 0 – 10 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
ShowcaseManufactured by Particle Measuring Systems (PMS)based in USA
Covering everything from the technology of particle counting, to the regulatory standards that apply to the pharmaceutical manufacturing industry, to the instrumentation and techniques needed to meet them. This premier handbook helps readers understand the topic of environmental monitoring more holistically and more extensively. With the release of the much-anticipated EU GMP Annex 1 2022 ...
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in reasonably clean water, measuring a TSS range of 0 – 2.5 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Purpose-built nano condensation particle counter CPC designed for use in the most critical fab spaces. The NanoAir™ 10 Condensation Particle Counter (CPC) is a revolutionary new product from Particle Measuring Systems (PMS). It provides the sensitivity of a CPC with the ease of use and functionality of a traditional cleanroom particle counter. Designed to monitor ultra-clean environments, ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Bubble Separator from Particle Measuring Systems is a welded PFA device that allows entrained bubbles in an ultrapure water (UPW) or process chemical sample to separate from the sample stream through buoyancy, prior to the sample entering the liquid particle counter. The UPW or chemical sample 1) enters the middle of the bubble separator and 2) separates at the tee, with 3) the liquid sample ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The BioCapt® Single-Use Microbial Impactor helps minimize false positives for microbial activity in pharmaceutical cleanrooms by reducing contamination from handling of agar plates. This results in a decrease in investigations while increasing productivity. Additionally, many costly and time consuming sterilization steps, such as autoclaving, disinfecting, handling and logistics are ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Wide temperature range (650 to 1300°C) allows coverage of both main buffer growth and MQW growth. Measure deposition thickness with the additional reflectometer at 635 nm on the UVR 400. Adjustable emissivity, transmittance, and ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
When remote and flexible monitoring with no fixed sampling point is needed, the Remote Sampling Isokinetic Sampling Probe (ISP) Kit a I lows for samples to be taken while maintaining the integrity of the measurement. The ISP Kit uses a length of sample tubing to connect the sample point to the impaction plate, and is ideal for minienvironment sampling applications such as RABS, Laminar Flow ...
-
PremiumManufactured by Access Sensor Technologies LLCbased in USA
PM2.5 is monitored worldwide for ambient and personal exposure to harmful ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
New challenges require new tools. TEGAM has rethought thermocouple calibration to offer you the performance you need today without complicating your work. The new 940 Series handheld thermocouple calibrators provide laboratory-grade temperature calibrations in a highly portable package that goes to the work site with ease. Industries that measure temperature are being pushed to achieve better ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
New challenges require new tools. TEGAM has rethought thermocouple calibrators to offer you the performance you need today without complicating your work. The new 940 Series provides laboratory-grade temperature calibrations in a highly portable package that goes to the work site with ease. Industries that measure temperature are being pushed to achieve better results for both quality and product ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
LiQuilaz II optical liquid particle counters are volumetric monitors with a variety of sizing sensitivities as low as 0.2 µm. They provide high precision analysis for most process chemicals, including hydrofluoric acid and hot corrosive chemicals up to 306 °F (152 °C). LiQuilaz II sensors provide the same levels of accuracy, reliability and repeatability that customers have trusted ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The CLS-700 T corrosive liquid sampler is a compression sampler combined with a LiQuilaz® particle counter for effective measurement of particles in fluids contained in unpressurized vessels. It is ideally suited for testing chemicals containing dissolved gas, where bubbles could be incorrectly detected as particles. The system eliminates bubbles by pressurizing the sample and keeping the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The APSS-2000 Liquid Particle Counter for USP 788 sizes and counts suspended particulate matter in a wide range of liquids, including parenterals, to meet all current U.S., European and Japanese Pharmacopoeia standards. When it comes to particle monitoring quality control for liquid drug manufacturers, it’s important to meet regulations while minimizing waste. Along with USP 788 for ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Model 932B is a dual-channel, datalogging digital thermometer compatible with type K, J, T, E, B, N, R & S thermocouple probes to enable a wide range of temperature measurements, (-418 °F to 3308 °F) and boasts a 1000 hour battery life using three AA batteries. The 932B provides dependable and uninterrupted portable measurement capability without expensive batteries, AC adapters ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Sekidenko OR400T delivers accurate, non-contact temperature and emissivity measurements in a compact, modular platform. Configurable wavelength based on material type and required temperature range. Remote lensed optical sensors or sapphire light pipes for in-situ measurement. Both analog and digital communications with optional Fieldbus protocols for closed-loop ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
FluorOptic Temperature Converter for measurements between -200 to 450 °C (-328 to 842 °F) in semiconductor applications. The Luxtron® M-1000 is Advanced Energy’s newest FluorOptic® Thermometry (FOT) converter platform enabling accurate temperature measurement as low as -200 °C and up to 450 °C for advanced semiconductor applications in etch and ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Houses the chemical particle sensor, detects chemical leaks with an external alarm, and provides secondary containment when a leak occurs. In the event of a chemical leak within the chemical particle counter or sample connections, the system will automatically detect the leak, shut off inlet and outlet sample valves, turn off power to the particle sensor, and provide an external alarm ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's WaveCapture™ Analyzer Series offers excellent performance in real-world applications. Its innovative high-efficiency optical design provides excellent wavelength repeatability, resolution, long-term stability, ultra-low power consumption, sub-ms response time, no moving parts, and lifetime calibration. The WaveCapture FBG Analyzer is field-proven, with thousands of units ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Fast digital pyrometers with fiber optics for measurements on metals, ceramic, graphite, etc. Different optical heads available. Temperature ranges between 250 and 3500 °C. The Impac®50-LO plus and IGA 50-LO plus series comprise a range of highly precise, infrared measuring instruments, each equipped with fiber optics for non-contact temperature measurement on diverse materials like ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you