Water Testing Applications in Ohio
-
Premium
Hand-Held & Process Control Water Testing Instrument for Circuit Board Cleanliness Testing Industry
Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple 'on line' test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L ...
By Myron L Company Distributor in OHIO (USA).
-
Premium
Phosphorimetric Determination of Uranium in Water
Introduction: The presence of uranium in water causes radiological pollution as all uranium radionuclides decay by both alpha and gamma emissions. Chemical aspects of uranium toxicity include mainly nephritis and other renal diseases. Mentioned harmful features affect on humans even in low concentrations thus requiring sensitive analysis ...
By Lumex Instruments Distributor in Twinsburg, OHIO (USA).
-
Premium
Water Testing for Automatic Rinse Tank Controls
Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have ...
By Myron L Company Distributor in OHIO (USA).
-
Premium
Pool Water Testing / Spa Water Testing
Anyone and everyone who is responsible for operating and maintaining a swimming pool or spa has to test, monitor, and control complex, interdependent chemical factors that affect the quality of water bathers are immersed in. Additionally, aquatic facilities operators must be familiar with all laws, regulations, and guidelines governing what these parameters should ...
By Myron L Company Distributor in OHIO (USA).
-
Premium
Determination of chlorate, perchlorate, and chlorite ions in drinking water including bottled water
Introduction Chlorination remains the most widespread way of disinfecting water in the world. Its flaws are: high toxicity of chlorine and other chlorinating reagents, also formation of various chlorine-containing compounds, including chlorite-, chlorate, and perchlorate anions. Maximum permitted levels (MPL) of these components are established in WHO Guidelines for drinking water and other regional and national ...
By Lumex Instruments Distributor in Twinsburg, OHIO (USA).
-
Premium
Hand-Held & Process Control Water Testing Instrument for Boilers and Cooling Towers
Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be ...
By Myron L Company Distributor in OHIO (USA).
-
Premium
Determination of bromide and iodide anions in water samples
The method allows determination of bromide and iodide ions in natural, potable (incl. bottled), and mineral water using capillary electrophoresis (CE) ...
By Lumex Instruments Distributor in Twinsburg, OHIO (USA).
-
Premium
Hand-Held & Process Control Water Testing Instrument for Fountain Solutions
Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately ...
By Myron L Company Distributor in OHIO (USA).
-
Premium
Hand-Held & Process Control Water Testing Instrument for Environmental Industry
Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation's waterways. Today, in many ...
By Myron L Company Distributor in OHIO (USA).
-
Premium
Water Testing for Textile Manufacturing
The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before ...
By Myron L Company Distributor in OHIO (USA).
-
Premium
Hand-Held & Process Control Water Testing Instrument for Deionized Water Testing Industry
Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car ...
By Myron L Company Distributor in OHIO (USA).
-
Premium
Reverse Osmosis Water Testing
Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important process ...
By Myron L Company Distributor in OHIO (USA).
-
Membrane Equipment and Process-development Services for Water Treatment Industry
Membrane Specialists employ its proprietary Fyne process which uses nanofiltration to retain dissolved organic materials (mostly humic and fulvic acids) commonly found in surface waters used for drinking in remote communities in Canada and Alaska. If the organic components are not removed prior to chlorination, they can yield undesired disinfection by-products such as trihalomethanes and haloacetic acids. The membrane system also reduces levels of iron and other metals, along with waterborne pathogens, microbes ...
By Membrane Specialists LLC based in Hamilton, OHIO (USA).
-
Water Measurement Monitors for Monitoring Hydrocarbons in Wastewater
The Situation: A wastewater treatment company operated an oil/water separation facility on a multi-acre industrial site in Northern California. Its purpose was to recycle oil products for profit while at the same time providing a wastewater treatment service for industries based in Northern California. The oily water mixes processed by the company were obtained from tanker bilges, contaminated rainwater runoff, truck spills, oil spills into waterways, crankcase drain oils, hydraulic oils and industrial lubricants, ...
By Turner Designs Hydrocarbon Instruments, Inc. Distributor in OHIO (USA).
-
Analytical laboratory solutions for pharmaceutical industry
Whether TOC or VOC, Teledyne Tekmar has the best instruments for your pharmaceutical water-quality testing needs. Introduction of organic matter into water systems occurs not only from living organisms and from decaying matter in source water, but from purification and distribution system materials. A relationship may exist between endotoxins, microbial growth, and the development of biofilms on pipeline walls and biofilm growth within pharmaceutical distribution systems. A correlation is believed to exist between ...
By Teledyne Tekmar based in Mason, OHIO (USA).
-
UV fluorescence technology for monitoring of phenol in water
A plant located in the eastern United States manufactures phenolic resin for applications in plastics molding. This plant uses well water for cooling its reaction process and then discharges the water into a local ...
By Turner Designs Hydrocarbon Instruments, Inc. Distributor in OHIO (USA).
-
Blastox for One Step Lead Paint Abatement
Lead paint abatement is the process of abrasive blasting lead paint and encapsulating the lead particles rendering them non-hazardous. Blastox® has been used to successfully stabilize over 150,000,000 square feet of lead based paint. This success is owed to the One Step application of Blastox®. Since its available pre-blended with various media throughout North America, it is ready for application once the blended media reach your job-site for lead paint ...
By The TDJ Group, Inc Distributor in Southeast, OHIO (USA).
-
Bantox for Industrial Waste Stabilization
Bantox is a proprietary formulation of calcium silicates. It has served as our base chemical platform, allowing us to develop multiple product lines and many patents that serve a wide range of industries. Bantox stabilized waste complies not only with TCLP standards, but also with MEP (Multiple Extraction Procedure that EPA uses for long-term stability), SPLP and fresh water leach tests. For decades, silicates have stabilized heavy ...
By The TDJ Group, Inc Distributor in Southeast, OHIO (USA).
-
Analytical laboratory solutions for environmental industry
Teledyne Tekmar has been the market leader in environmental and drinking water testing for decades, having invented many of the instrumental technologies used in today’s lab. From TOC drinking water analysis to EPA compendium methods for soil and water, Tekmar has the right instrument for your ...
By Teledyne Tekmar based in Mason, OHIO (USA).
-
Surface water quality monitoring
By HORIBA Europe GmbH Distributor in OHIO (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you