testing reagent News
-
Stable PH levels are the foundation of a clean pool
If your PH is incorrect then your swimming pool water will become unhygienic making it not safe to swim in and can also hurt the eyes and skin of swimmers. It is important to test and correct your swimming pools PH level. Testing your pool's pH level is as simple as dipping a strip of paper in the water. Pool water should be tested regularly to ensure it remains clean and hygienic. The pH ...
-
Industrial Test Systems, Inc. releases new Arsenic Quick™ mini-kits
Industrial Test Systems Inc., innovators of water quality testing announce the Arsenic Quick™ mini-kits. Our new mini-kits, a smaller version of our world renowned and highly rated Quick™ kits, are now available in five and two tests with detection ranges from 1-500 ppb. Our Quick™ Arsenic tests were developed with considerations for safety, accuracy, ease-of-use, and speed. They are ideal for ...
-
New arsenic quick™ mini-kits released
Industrial Test Systems Inc., innovators of water quality testing announce the Arsenic Quick™ mini-kits. Our new mini-kits, a smaller version of our world renowned and highly rated Quick™ kits, are now available in five and two tests with detection ranges from 1-500 ppb. Our Quick™ Arsenic tests were developed with considerations for safety, accuracy, ease-of-use, and speed. ...
-
New Arsenic Quick mini kits released - one of the best Arsenic water testing kits available
Today, Industrial Test Systems Inc., innovators of water quality testing announces two new models of the Arsenic Quick™ mini-kits. The mini-kits, a smaller version of our world renowned and highly rated Quick™ kits, are now available in five tests. The new kits Arsenic Ultra Low Quick™ II (481300-5) with a detection range of 0 to >20 ppb (μ,g/L) and Arsenic Low Range Quick™ II (481301-5) ...
-
Withdrawn Standard: ASTM D4281-95(2005)e1 Standard Test Method for Oil and Grease (Fluorocarbon Extractable Substances) by Gravimetric Determination (Withdrawn 2012)
1. Scope 1.1 These test methods cover the estimation of oil and grease in water and wastewater by a gravimetric determination of fluorocarbon extractable substances from an acidified sample. Also included in this estimation of oil and grease are any other compounds soluble in chlorofluorocarbon-113 and non-volatile ...
-
New methodology for poolside compliance testing
A new method using a water proof meter with built in photo cell and reagent delivery device (test strips) was presented at the 5th Annual World Aquatic Health™ Conference in Colorado Springs October 17th. Ivars Jaunakais, President of Industrial Test Systems, Inc. (ITS), presented a new method for pool water testing last week during the annual World Aquatic Health Conference. The eXact ...
-
ANDalyze Expands Product Sales Into China and Australia, Capturing Growing Opportunity in the Water Testing Market With DNA Based Sensor Technology
ANDalyze's focus on water testing for heavy metal contamination has found growing demand for its new DNA based sensor technology. The product cuts the time and effort needed for field testing water supplies and is ideal for fast on-site detection and analysis of low part per billion (ppb) contamination levels. CHAMPAIGN, Ill., Sept. - ANDalyze sensor/Fluorimeter platform solution for simplifying ...
-
Technika Expands Water Quality Testing Product Line by Introducing the eXact™ EZ Meter Kit.
Scottsdale, AZ October 8, 2007 --Technika announces the addition of the new eXact™ EZ meter kit to its Water Quality testing product line. This affordable, water-resistant, meter kit is designed to give fast water chemistry results for residential, commercial, municipal and environmental water quality testing. The eXact EZ meter kit comes with eXact™ EZ Strips, which can be used for EPA Compliant ...
-
The eXact iDip Photometer – use your smart device to monitor your pool water!
The eXact iDip photometer allows users to record pool water tests on their smartphone or tablet, giving traceability in addition to fast results. Now the eXact iDip has also been named as one of the top 100 most innovative technologies of 2014 by R&D magazine The iDip works in the same principle as other eXact products – by having reagents embedded onto testing strips less is required ...
-
ASTM D2711 - 11 Standard test method for demulsibility characteristics of lubricating oils
This test provides a guide for determining the demulsibility characteristic of lubricating oils that are prone to water contamination and may encounter the turbulence of pumping and circulation capable of producing water-in-oil emulsions. 1. Scope 1.1 This test method covers the measurement of the ability of oil and water to separate from each ...
-
ASTM D6851 - 02(2011) standard test method for determination of contact ph with activated carbon
The determination of contact pH can be used as a simple and fast measurement that can allow activated carbon producers and users to have a standard method for assessing the effect various carbons will have on the initial pH of the water in contact with the carbon. It has been determined that there is a bias between this method and Test Method D3838; they are not equivalent. 1. Scope ...
-
New arsenic wood field testing kit
Now available from Industrial Test Systems, Inc. is a quick, easy, field test kit that can confirm the presence of inorganic arsenic in wood. Arsenic Quick™ 481396-W kit is a modification of the US Patented, ETV Verified arsenic test for drinking water. This 10 minute test readily confirms the absence or presence of arsenic in any wood sample, including CCA treated lumber using safe reagents. The ...
-
USEPA approves free chlorine test strip
Industrial Test Systems, Inc., a water quality test strip manufacturer located in Rock Hill, SC, is pleased to announce that its SenSafe™ Free Chlorine Water Check test strip is available for compliance testing as described in the Federal Register (Vol 72, No. 47, Monday, March 12, 2007, p.11204, ITS Method D99–003). SenSafe™ Free Chlorine Water Check can now be treated as an ...
-
Arsenic wood field testing kit
Now available from Industrial Test Systems, Inc. is a quick, easy, field test kit that can confirm the presence of inorganic arsenic in wood. Arsenic Quick™ 481396-W kit is a modification of the US Patented, ETV Verified arsenic test for drinking water. This 10 minute test readily confirms the absence or presence of arsenic in any wood sample, including CCA treated lumber using safe ...
-
Withdrawn Standard: ASTM D3366-95(2003)e1 Standard Test Method for Color of Maleic Anhydride and Phthalic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) (Withdrawn 2012)
This test method covers the determination of the visual measurement of the color of maleic and phthalic anhydride melt before and after prolonged heating under specified conditions of time and temperature. Color values are expressed in terms ...
-
ASTM D6304 - 07e1 standard test method for determination of water in petroleum products, lubricating oils, and additives by coulometric karl fischer titration
A knowledge of the water content of lubricating oils, additives, and similar products is important in the manufacturing, purchase, sale, or transfer of such petroleum products to help in predicting their quality and performance characteristics. For lubricating oils, the presence of moisture could lead to premature corrosion and wear, an increase in the debris load ...
-
ASTM E1560 - 11 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
The NVR obtained by this test method is that amount which is available for release by wipers in normal use. Evaporation of the solvent at the stated temperature is to quantify the NVR that can be expected to exist at room temperature, since the slight difference between room temperature and test temperature has not been shown to result in ...
-
Peracetic Acid visual test strip is safe and easy to use
Peracetic acid is a versatile disinfectant and powerful oxidizer, used in a wide range of applications primarily in the food industry. Industrial Test Systems, Inc., manufacturer of accurate colorimetric water test kits, including instrumentation, announces its latest field test, WaterWorks™ Peracetic Acid (#480065) test strips. WaterWorks™ Peracetic Acid test strips are a quick and ...
-
ASTM D129 - 11 standard test method for sulfur in petroleum products (general high pressure decomposition device method)
This standard details the general bomb test method for determination of the amount of sulfur in lubricating oils with additives, additive concentrates, lubricating greases, and other petroleum products with low volatilities. This test method entails oxidizing samples by combustion in a bomb containing oxygen under pressure. The amount of sulfur is determined by gravimetry. ...
-
ASTM D7457 - 12 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
This test method is useful for determining organic as well as inorganic chloride compounds that can prove harmful to equipment and reactions in processes involving hydrocarbons. The combination of both the organic and inorganic chloride is commonly termed “total chloride” and since the inorganic chlorides are partially recovered, the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you