Only show results available in Virginia? Ok

Water Toxicity Monitoring Applications

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. At the entrance of the waste water plants, where the waste water arrives, strongly...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR Online Odor Monitoring

    ontext & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. Odors are very distinct air contaminants as they generate nuisances. The factors playing a...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Determination of zinc in water by fluorimetric method

    In accordance with WHO’s Guidelines for Drinking Water Quality there is no health-based guideline value of zinc in water concentration. Concentration of zinc in tap water can increase as a result of its dissolution from pipes. Also, elevated levels of zinc may be an indicator of increased concentrations of other toxic metals; thereby zinc in water analysis is an essential analytical task. Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of zinc in...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Waste water treatment plants Screening area: stripping

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. To ensure the safety of operatives in the screening building/area of waste water treatment...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Determination of anionic surfactants in water by fluorimetric method

    Anionic surfactants (A-SAS) represent, by volume, the most important group of surfactants used in cleaning products and the oldest and the largest volume anionic surfactant is soap. In concentrations 0.1 ~ 1.0 mg/L A-SAS become toxic for aquatic environment. Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of anionic surfactants in water samples using the FLUORAT-02 analyzer. The method became the Interstate standard for anionic surfactant in water...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Process water

    Process water is one of the most challenging for analysis instrumentation. Mostly this water is characterized by a certain purity, fluctuating loads, as well as very high salt concentrations. Since any disturbance in water-circuits can lead to an entire plant shutdown, resulting in huge costs, reliable and fast online water analyzers are an essential. Due to the diverse demands of various measurement challenges, application-specific analyzers provide huge advantages against standard analyzers that are used for...

    By LAR Process Analysers AG based in Berlin, GERMANY.

  • Premium

    Online monitoring solutions for the drinking water industries

    AppliTek manufactures wet-chemical analyzers specifically designed for measuring on a continuous base the quality indices of drinking water, from raw water intake up to distribution level. Our systems have a small footprint, reduced reagent consumption and show excellent levels of detection in compliance with modern standards. On top of that, the delivery of safe water throughout the water cycle will raise the need for efficient monitoring systems detecting in real-time contaminations. `Broadband toxicity`, a...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Waste water respirometry solutions for toxicity based consents

    Water companies, water authorities or publicly-owned treatment works (POTW) need to have some knowledge of the composition of the wastes they it receive. In addition to testing for ammonia and BOD or COD levels, treatment works can license industrial discharges on the basis of concentrations of some of the known toxic compounds. However, it is recognised that very many non-regulated toxic materials still enter the treatment works and reduce the efficiency of biodegradation, and may cause toxic shock. The way is...

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • Early warning systems for waste water industry

    Physico-chemical parameters alone are not sufficient in obtaining reliable information on treated wastewater. Online toxicity monitoring must be performed in combination with routine chemical analysis. The assessment of biological effects of wastewater discharges in the ecosystems is today considered relevant and ecotoxicological tests identifying the ecological hazard are useful tools for the identification of environmental impacts.

    By microLAN B.V. - Aqualabo Group based in Waalwijk, NETHERLANDS.

  • Waste water respirometry solutions for toxicity reduction tests

    In industrial manufacturing companies, before a new process comes on-line, it is important to measure the toxicity of the effluent stream. This is especially the case for companies who treat their own waste. From the toxicity value (EC50) obtained, it may be a cost-effective solution to simply discharge the effluent to the treatment works at a slow and defined rate to minimise damage to the activated sludge. Following a period of acclimatisation it is often possible to increase feed rates to the plant and this...

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • algae control in drinking water plants

    By controlling algae, cyanobacteria and fouling LG Sonic can efficiently reduce taste and odor problems in a treatment plant. The performance of a drinking water treatment plant is consistent with the amount ol contamination in the water. Growth of algae and other fouling in and before a treatment plant can cause various problems within the process. In general, these issues are related with taste or odor of the water. Growth of algae, cyanobacteria and bacteria within the basins of the plant itself, increase...

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Pure drinking water solutions for day care & preschools

    CHILDREN ARE ESPECIALLY SENSITIVE TO TOXINS IN WATER. Children are much more sensitive to chemicals in the water supply than adults. A child’s brain continues to grow after birth, and this development process is very sensitive to chemical interference. Research now suggests that a single small dose of a chemical on a critical day of development can cause permanent learning disorders*. Now you can show parents that your preschool is the market leader in protecting their children from toxins that could be...

    By Pure & Secure, LLC. based in Lincoln, NEBRASKA (USA).

  • Environmental monitoring solution for mining industry

    Control of fugitive dust in the mining industry and in particular open cut operations is of great concern to the local community, environmental protection authorities and of course the mine operators. Dust emissions can cause both nuisance effects as well as health effects and so mines typically employ multiple dust suppression activities to minimise their environmental impact. Many of these activities can be expensive to operate and depending on environmental conditions, at the time, may not actually be effective...

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • BOD and COD Removal

    Hydrogen peroxide (H2O2) has been used to reduce the BOD and COD of industrial wastewaters for many years. While the cost of removing BOD / COD through chemical oxidation with hydrogen peroxide is typically greater than that through physical or biological means, there are nonetheless specific situations which justify the use of hydrogen peroxide. These include: Predigestion of wastewaters which contain moderate to high levels of compounds that are toxic, inhibitory, or recalcitrant to biological treatment (e.g.,...

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Concerned about PAHs in Parking Lot Sealcoats?

    There is growing concern - and regulations in the works - over the use of sealcoating products due to their high PAH content.  In the United States and elsewhere, most sealcoats are made from coal tar which can be toxic to aquatic life and threaten public water supplies from rain and runoff. Sitelab can be used to quickly check the concentrations of polycyclic aromatic hydrocarbons and determine if it's made from coal tar or alternative petroleum based black top sealants.  Got samples?  We'll test them for...

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Biological wastewater processes for petrochemical

    This wastewater typically contains a lower biochemical to chemical oxygen demand.  We determine biodegradability of each waste stream and the presence of toxic or inhibitory compounds. 

    By Biowater Technology AS based in Tonsberg, NORWAY.

  • Waste water respirometry solutions for toxicity tracking

    If toxicity is identified in a mixed sewage entering a treatment works, the problem for the plant manager is to track and identify the source of the toxicity. This can be done by sampling the effluent stream at various points in its length. By working in a logical sequence back up the sewer network the number of samples can be minimised. This type of testing should be rigorously enforced for new product introduction by a waste producer, as well as sampling the effluents directly at source. The samples would be...

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you