Environmental Industry Equipment In Taiwan
-
ShowcaseManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita Dropwise Condensation Technology is a patent pending technology to increase operating efficiency and conserve energy in industrial production facilities. This technology can be applied without apploying any additional system equipment. The KURITA DW product is dosed continuously into the steam line in front of the target device creating a water repellent film on the surfaces. Increasing ...
-
ShowcaseManufactured by Mobiltex Data Ltdbased in CANADA
Robust, reliable, and cost-effective temperature monitoring of pipeline assets is now available from MOBILTEX, engineered for performance in even the most extreme and remote locations. The MOBILTEX TS1 configurations enable field technicians to install remote, battery-powered GPS-enabled temperature sensing capabilities that are compatible with our CorTalk RMU1 platforms. Measurement data is ...
-
ShowcaseManufactured by F.A.S.T. GmbH - Groupe Clairebased in GERMANY
Extremely quick data provision thanks to 6-core processor. 2 functions in one unit: acoustic leakage detection and correlation. Automatic or manual measurement possible. Easy-to-understand display and easy operation due to large colour ...
-
ShowcaseManufactured by Particle Measuring Systems (PMS)based in USA
Covering everything from the technology of particle counting, to the regulatory standards that apply to the pharmaceutical manufacturing industry, to the instrumentation and techniques needed to meet them. This premier handbook helps readers understand the topic of environmental monitoring more holistically and more extensively. With the release of the much-anticipated EU GMP Annex 1 2022 ...
-
ShowcaseManufactured by Advanced Energy Industries, Inc.based in USA
The Mikron MCS640 thermal imagers measure temperatures between 600 and 3000°C with minimal interference from temperature reflections. It's streamlined design, makes it easy to integrate MCS640 thermal imagers into compact production machines. And solid and robust housing provide reliability in harsh industrial environments. The MCS640 series offers standard and HD versions. The MCS640-HD can ...
-
ShowcaseManufactured by Flottweg SEbased in GERMANY
In the process of treating waste water, fine biological sludge is constantly produced during the decomposition process at a sewage treatment plant. For a stable decomposition process in the biological treatment phase, the sludge produced in the secondary sedimentation pond, also known as excess sludge, is removed and fed into the digestion tower. Flottweg's OSE decanters thicken the sludge before ...
-
ShowcaseManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
Highly accurate yet easy to use: With the ML3 ThetaProbe Soil Moisture Sensor it’s easy to make reliable, accurate soil moisture measurements. Simply insert the soil moisture probe into the soil, connect to your data logger or readout unit, provide 5-14 V DC at 18 mA, and within seconds you can be logging soil moisture. The ML3 ThetaProbe is robust, buriable and maintenance free ...
-
ShowcaseManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The robust system for efficient and stable characterization of high matrix samples: Outstanding plasma robustness for high matrices. Minimized drift at changing matrix load. Efficient interference management with outstanding ease of use. ...
-
ShowcaseManufactured by NIVUS GmbHbased in GERMANY
Contactless flow measurement for open channels and part filled pipes. The contactless low-maintenance radar sensor provides reliable operation even at very high discharge velocities with low flow levels. Dynamic hydraulic models for various channel shapes based on varying filling levels enable accurate detection of the real flow rate. Introducing the NivuFlow 7550 we provide a transmitter for ...
-
ShowcaseManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
For safe refilling of SF6 gas into gas compartments by overpressure The handy device allows filling of electrical equipment with SF6 gas directly from the cylinder by overpressure. The primary gauge of the pressure reducer displays the cylinder pressure in bar, psi and kPa. The secondary gauge indicates the desired filling pressure to be set easily by means of the handle. The cylinder pressure ...
-
ShowcaseManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
SCI’s sensor division incorporates state of the art sensor technology that has been enhanced with a machine learning calibration system and convenient cloud-based data acquisition platform. SCI sensor products merge with the Internet of Things (IoT), digital electronics, machine learning, and data visualization technologies to deliver precise air quality and meteorological data in ...
-
ShowcaseManufactured by BWB Technologies Ltd.based in UNITED KINGDOM
Finally, a Flame Photometer specific to your needs. The first simultaneous Flame Photometer with built in compressor and configurable element analysis to your requirements. The BWB Flash is the first and only fully configurable up to four channel flame photometer that detects and displays all calibrated ions at the same ...
-
ShowcaseManufactured by Simple Solutions Distributing LLCbased in USA
GC IPH is a bituminous coal-based activated carbon that is specially impregnated for the desulphurization of gases and the removal of all acidic contaminants such as hydrogen sulfide, hydrogen chloride, and mercaptans. This product comes in 55 lb ...
-
ShowcaseManufactured by Synspec BVbased in NETHERLANDS
Continuous emissions monitoring system (CEMS) for high-range stack measurements. Synspec Delta 116 is a continuous emissions monitoring system (CEMS) built specifically for high-range stack measurements according to US EPA 25A. The analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ensures that ...
-
ShowcaseManufactured by Flottweg SEbased in GERMANY
Mobile Sludge Dewatering in a Container: Connect and Dewater. In small sewage treatment plants, the investment costs for dewatering and thickening of incoming sludge frequently plays a decisive role. In stationary dewatering systems, for example, the construction of a new building or the expansion of existing space can be significantly costly. You can avoid those costs with mobile container ...
-
ShowcaseManufactured by Flottweg SEbased in GERMANY
Full power with reduced energy consumption. Decanter centrifuges for sewage sludge and waste water applications. The demands on the quality and efficiency of sewage treatment plants are growing from year to year, not least due to rising energy and disposal costs. As a result, using decanters to dewater sludge means using state-of-the-art technology. The C-series decanters from Flottweg achieve ...
-
ShowcaseManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Emission Concentrator is an adsorption system designed to concentrate large volume, low concentration process exhaust into a much smaller, higher concentrated air stream. The greatly reduced flow with higher Volatile Organic Compound (VOC) concentration is sent to a thermal or catalytic oxidizer for VOC destruction. The destruction device can then be much smaller in size, significantly ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Ultra DI® 50 Liquid Particle Counter is designed specifically for de-ionized (DI) water systems and will count and size contaminants as small as 0.05 μm. Larger sample volumes and ultra-low zero count capability allow you to detect smaller excursions with more relevant statistical data, with shorter sample intervals for quick data analysis so you can respond immediately to ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Widely considered to be the most energy-efficient oxidizer, Anguil's Regenerative Thermal Oxidizer (RTO) uses ceramic media to recover upwards of 97% of the available energy. What makes our RTO so popular is its ability to repurpose the thermal energy generated during operation to reduce operating costs and energy consumption of the system itself. The regenerative component makes it capable of ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Permanent Total Enclosures (PTEs) provide numerous advantages for manufacturers who paint, spray, coat or apply solvent based materials to their product. The primary function is to provide 100% capture of all fugitive over-spray of harmful air pollutants used within the enclosure, maximizing the capture and control efficiency of the facility. This results in fewer uncontrolled emissions being ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you