Wave and Tidal Monitoring Applications available in Massachusetts
-
Premium
Ultrasonic Sensors for Water Monitoring
Senix ToughSonic Ultrasonic Transmitters measure water level using “non-contact” technology that looks down at the water from above. These sensors are used in open air and in stilling tubes that constrain the sound and improve performance. They are easy to use and reliable, and thousands are installed applications around the world for irrigation, stream monitoring, flood and tsunami warnings and sea level monitoring. Our General Purpose Sensors are housed in 316 stainless steel suitable for outdoor ...
By Senix Corporation based in Hinesburg, VERMONT (USA).
-
Seismic borehole and surface solutions for crosshole/downhole
Ship locks and lifts: A ship lock is an engineering structure which enables ships to overcome the level difference between two waterways. Water level is raised or lowered by filling or emptying the lock chambers. Filling and emptying a lock chamber is a central process of the ship lock which causes high cyclical loads on the underground. therefore, an a-priori estimate of the soil behaviour under loads is crucial for geotechnical engineers to select the best design parameters and to avoid undesired deformations on ...
By Geotomographie GmbH based in Neuwied, GERMANY.
-
Flexar - Guided Wave Radar for Continuously Measuring Corn Surge Hopper Level
What continuous level measuring product is ideal for challenging applications, such as a corn surge hopper in an Ethanol facility where the material level is constantly changing and internal vessel environment extremely dusty? ...
By Monitor Technologies, LLC based in Elburn, ILLINOIS (USA).
-
Operational modal analysis software solution for harmonic detection and removal (HDR) sector
All versions of ARTeMIS Modal support the Harmonic Detection and Removal (HDR) plugin that enables detection and possible removal of harmonic components present in the response measurements used for Operational Modal ...
By Structural Vibration Solutions A/S based in Aalborg East, DENMARK.
-
Flexar- Guided Wave Radar for Permeate Westway Feed Products
“I need to reliably and accurately know the level of my Whey Permeate tanks. Accuracy is very important and the instruments must work reliably with the material being measured. I tried thru-air radar units but the antenna became coated and the units would work erratically and required cleaning. I need something plug-and-play” ...
By Monitor Technologies, LLC based in Elburn, ILLINOIS (USA).
-
Seismic borehole and surface solutions for soil dynamic parameter investigation sector
Site classification according to EC8 and DIN4149. In order to quantify the design load for buildings due to an earthquake the Eurocode 8 (EC8) and the DIN4149 require the classification of the ground. The dominating or average shear wave velocity in depths down to 30 m is most often used for this classification. Beyond that the standards request certain design features as flexible foundation beams based on the class of the subsoil which are affecting the costs of a building. A seismic survey can often reduce the ...
By Geotomographie GmbH based in Neuwied, GERMANY.
-
Guided Wave Radar for Cement Real-Time Level Measurement
Flexar Continuous Level Systems Successful on Cement Powder and Flyash at Batavia Concrete. ...
By Monitor Technologies, LLC based in Elburn, ILLINOIS (USA).
-
Seismic borehole and surface solutions for dyke investigation sector
Strength characterization: Seismic methods are suitable to study the strength characteristics of dyke and dams. Seismic measurements are sensitive to density changes and compactness of soils. Therefore, areas with inadequate compactness of dykes can be detected. A correlation with SPT/CPT (Standard/Cone Penetration Testing) is often done because these methods also depend on the mechanical properties of the ...
By Geotomographie GmbH based in Neuwied, GERMANY.
-
Measuring the ocean surface solutions for offshore operations sector
Measuring local environmental conditions is critical for the planning and execution of offshore operations. Miros provides real-time measurements of local sea state and weather conditions to any user, on any device, providing critical data for all relevant ...
By Miros AS based in Asker, NORWAY.
-
Carbon Capture and Storage/Sequestration
Geophysical Insights brings the Paradise® AI workbench and its machine learning (ML) technologies to the challenge of identifying and characterizing prospective reservoirs for Carbon Capture and Storage/Sequestration (CCS). Determining reservoir rock and pore-fluid properties and detecting faulting or minor fracturing are vital considerations when evaluating prospective CCS reservoirs. ML technologies are now available to achieve these objectives – simultaneously – in joint interpretation of both ...
By Geophysical Insights based in Houston, TEXAS (USA).
-
Vibroseis Systems for Engineering 2
The professionals at Bay have a full suite of geophysical methods to provide superior subsurface imaging solutions for today’s most challenging ...
By Bay Geophysical, Inc. based in Traverse City, MICHIGAN (USA).
-
Measuring the ocean surface solutions for ports & coastal industry
From Spain’s national tide monitoring network to storm surge detection in Korea, sea state monitoring and erosion protection in Japan to oil spill detection in India, Miros sensors and solutions help protect coastlines, ports and critical infrastructure all around the ...
By Miros AS based in Asker, NORWAY.
-
Multichannel analysis of surface waves solutions for seismic site characterization industry
Most earthquake damage occurs due to ground amplifications which, for the same earthquake magnitude, change with ground stiffness at relatively shallow depths. Based on the premise established from a study that the top 30-m influences most and the shear-wave velocity (Vs) is the best indicator of stiffness, the average Vs in the top 30 m (denoted as Vs30m) is used as an important criterion in the design of building structures. In general, a lower Vs30m would be subject to a greater ground amplification (and ...
By Park Seismic LLC based in Shelton, CONNECTICUT (USA).
-
Multichannel analysis of surface waves solutions for soil-bedrock mapping industry
This is one of the most common type of MASW applications. Actual applications are grouped according to the depth range of bedrock; shallow (< 10m), intermediate (< 20 m), deep (< 30 m), and very deep (> 30 m). Data acquisition geometry and interpretation of the obtained 2-D shear-wave velocity (Vs) cross section are briefly presented for each example. ...
By Park Seismic LLC based in Shelton, CONNECTICUT (USA).
-
Measuring the ocean surface solutions for oil & gas industry
Miros has spent 35 years equipping the world’s oil and gas giants with real-time weather and sea state monitoring solutions. Our dry, cutting-edge radar-based technology significantly reduces “waiting on weather”, widens weather windows, and enhances the safety of ...
By Miros AS based in Asker, NORWAY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you