Wave And Tidal Monitoring Services For Monitoring And Testing Available In New Brunswick
-
based in USA
Pile Integrity Testing, also known as Sonic Echo Testing and low strain dynamic testing is used to determine the length and integrity of deep foundations and driven piles. The method works well in concrete or timber foundations that are not excessively slender. In order to perform the test, the top (preferably) or side of the foundation must be accessible. An accelerometer is placed on the top of ...
-
based in UNITED KINGDOM
In the evaluation of a geothermal resource it is critical to know the reservoir geometry, temperature, saturation, state of saturants, pore pressure, porosity and permeability. These are the parameters which will determine the production feasibility and cost effectiveness of a geothermal prospect. The increasing sophistication of seismic wave data collection and processing and recent experimental ...
-
Manufactured by Remoceanbased in ITALY
Giglio was one of the first Remocean On-Land installations. Remocean wave radar and coastal control system was used during Costa Concordia removal operations. Detailed information about sea state and surfcae current field was important to assist the ...
-
based in CANADA
Surveys of port facilities using a rotating head profiling sonar provide accurate ships’ berth depth measurements. As commerce increases, port authorities and ship operators require accurate bathymetric information in order to maximize the use of port facilities and the vessels that use them. Knowing ships’ berths profiles and depths are critical in order to accommodate today’s ...
-
based in ISRAEL
Ground penetrating radar is the most effective non-intrusive method for detailed mapping, detection and imaging of shallow subsurface and for inspecting various structures' interiors. The radar enables to carry out measurements on almost any type of surface such as soil, rock, fresh water, air or concrete; it also allows performing measurements in boreholes, conducting cross borehole tomographic ...
-
based in USA
Geophysics should be an integral part of any geotechnical site characterization study. GeoView has performed thousands of geophysical surveys as part of geotechnical characterization studies. The projects are managed by licensed professional geologists who have the tools and the knowledge to bring the appropriate method to each job. The following are common applications of geophysics in these ...
-
based in USA
The investigation of potential karst (sinkhole) activity at residential or commercial properties or undeveloped land is a multi-disciplinary process in which geophysics plays a critical role. Subsurface geology in karst environments is very complex and is often masked at the surface. Properly selected and applied geophysical tools will provide a 2 or 3 dimensional perspective of subsurface ...
-
by Partrac Ltdbased in UNITED KINGDOM
Partrac’s metocean division acquires the highest quality data in support of offshore projects. We acquire metocean data and support that is critical to the design and installation of structures in offshore renewables and oil and gas sectors. We also provide the design, development and installation of bespoke real-time metocean monitoring solutions, which provide invaluable operational ...
-
based in ISRAEL
A seismic survey is based on an energy source that excites seismic (elastic) waves in the subsurface. The seismic waves propagate in the subsurface and are reflected or refracted in the interfaces between mediums, having a different seismic velocity. The reflected and refracted waves are recorded on the surface by an array of receivers (geophones). The recorded travel times between the source and ...
-
based in USA
GeoView employs three methods for studying the geologic strata and objects buried beneath the seafloor. These include Sub-bottom profiling, Marine Seismic Refraction and Marine Seismic Reflection. GeoView owns and operates an Edgetech sub-bottom profiler. It generates a swept frequency source to produce a high resolution image of the sub-bottom at penetration depths up to 50 meters. It is useful ...
-
based in USA
Your environmental and oceanographic data collection requirements may demand a variety of tools, deployment options, and specialist input. Alpine not only has an extensive array of data acquisition tools, it also has the experienced staff and scientific advisor network to provide you with the right guidance to design and implement a survey that will successfully achieve your engineering and ...
-
Manufactured by XOCEANbased in IRELAND
XOCEAN’s USVs can be integrated with a full suite of sensors for the collection of environmental and metocean data including wind speed/direction, air temperature, pressure, wave height/direction, tidal flows and water ...
-
based in USA
The Impact Echo Method is used to determine the thickness of concrete, wood, stone, and masonry structural members. It can also be used to determine the condition when voids, honeycombing and/or cracks are suspected. A solenoid is used to create a high frequency compressional wave that reflects off the bottom of the structure or from a flaw in the structure. The reflected wave is then recorded, ...
-
based in NEW ZEALAND
NIWA run a computer model which simulates wave heights across the Canterbury continental shelf and along the coast. NIWA offers a more advanced wave forecast for the Southwest Pacific and Southern Ocean as a commercial service, contact Richard Gorman for further information, details at bottom onf this page. For the Canterbury model, we use a wave refraction model to simulate wave heights across ...
-
by Eliosoftbased in ITALY
Acquisition and processing of multi-component data for the characterization of vast (2D and 3D) areas. Thanks to the opportunities which originated from the synergies with European partner companies and our procedures based on multi-component FVS (Full Velocity Spectrum - Dal Moro et al., 2014) approach, we are now capable of acquiring and processing multi-component data aimed at characterizing ...
-
based in GREECE
Passive Seismic Tomography is the gem in our exploration toolbox. A methodology originating from regional seismology, downscaled after years of experience at an exploration level. Easily applicable, cost effective and environmentally friendly, it is a robust exploration alternative in cases where conventional practices wouldn’t be an option, either due to block size, penetration issues, ...
-
by Eliosoftbased in ITALY
Eliosoft has always distinguished for the educational activity about organizing meetings and workshops focused on all the techniques (active and passive) used to determine the vertical shear-wave velocity (Vs) profile: MASW and MFA (Rayleigh and Love waves), HoliSurface®, ESAC, ReMi, MAAM, HVSR, etc. The workshops are organized in cooperation with institutions and private companies that want ...
-
by SeaLab SRLbased in BELGIUM
Nearshore structures can significantly impact the local hydrodynamics and water exchanges, modifying the environment. It can also lead to unwanted situations such as the transport of pollution in protected areas or the creation of stagnant water areas. We provide modeling tools that allow you to study the global impact of artificial structures on your area of interest. Design and test different ...
-
based in CANADA
The oceanography group at Rescan specializes in characterizing the physical, chemical and biological marine, estuarine and coastal environment. Conceptual and numerical models are developed to provide insight into coastal processes, potential environmental impacts from project activities, and ultimately to implement design solutions for coastal ...
-
based in ISRAEL
Geotec offers various measurement services of ground vibrations and air blast, caused by blasts, heavy duty construction equipment and other sources. The purpose of the measurements is to prevent damage to structures and discomfort to people. Additionally, vibration measurements enable contractors to plan their activities on the basis of accurate scientific information and maximize the efficiency ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you