Wear Debris Monitoring Equipment For Monitoring And Testing In USA
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
FieldLab 58 is a battery-powered, Integrated oil analysis system that provides quick and comprehensive oil analysis in the field. Commercial field service professionals managing fleets of high-value assets require portable, lightweight devices that provide rapid oil analysis results with quality similar to oil analysis labs. Funded by the United States Department of Defense (DoD), then developed ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
LaserNet 200 Series is a contamination and wear debris analyzer that monitors lubricant condition for predictive maintenance. Particle Analyzer: The LaserNet 200 Series allows reliability professionals to quickly and easily assess machinery health in just minutes. By testing only a few milliliters of fluid, users see a complete picture of machine wear and particulate contamination. This enables ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
Oil is the lifeblood of equipment, and as such carries wear debris and other important information from all parts of the operating system. Thus analysis of oil samples provides a non-invasive indication of component and overall machinery health, making it an essential tool for maintenance programs. Oil analysis is often able to identify problems before vibration analysis can detect them. ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The SpectroT2FM 500 Analytical Ferrography Laboratory is a complete analytical system for the separation and interpretation of wear and contaminant particles in used lubricant oils, hydraulic fluids, coolants and fuels. It consists of the T2FM Ferrogram maker, a bichromatic microscope, video camera and image capture software. The SpectroT2FM 500 is fast because there is no delay time as sample is ...
-
Manufactured by Combustion Technologiesbased in USA
Mettle Plus Gold EP Grease is superior lithium complex grease designed to provide excellent lubricating qualities over a wide range of temperatures. Designed for work under the toughest conditions with excellent mechanical and chemical stability. Mettle Plus Gold EP Grease is designed to “always stay in place” under the worst operating conditions of water-dirt-mud, providing you with ...
-
Manufactured by Altra Industrial Motion, part of Regal Rexnordbased in USA
Series 2000 gear drives feature enhanced performance, design flexibility, fast and easy installation and low maintenance. Units are dimensional drop-in replacements for SEW Eurodrive® KA and R Series ...
-
Manufactured by Poseidon Systems, LLCbased in USA
A real-time, in-line fluid sensing technology for the detection of metallic wear debris and particulates in a lubrication system. By continuously monitoring wear debris generation, the device alerts users to faults in their earliest stages allowing for lower cost corrective actions than conventional schedule based maintenance. The DM4600 integrates directly with CJC™ Fine Filters. The ...
-
Manufactured by Dynamic Sealing Technologies, Inc.based in USA
The EST Series thru-bore slip rings feature a 1.5 inch thru-bore for shaft mounting or fluid transfer and incorporate low-wear, fiber brush contacts. EST slip rings do not require lubrication and produce virtually no wear debris. Models are available in 6, 12, 18, and 24 circuits. Ethernet options also ...
-
Manufactured by TYMCO, Inc.based in USA
The TYMCO Model 210 is the parking lot sweeper with both power and maneuverability that you need to get the job done. With a height clearance as low as 6’6” and a large 2.4 cubic yard hopper, the Model 210 is ideal for tackling a downtown parking garage or the largest of parking lots. When other parking lot sweepers are too large, and small outdoor ride-on or walk-behind sweepers ...
-
Manufactured by Metron-Farnier, LLCbased in USA
Venturi Inlet (Single Jet) – The Venturi inlet conditions the water into a jet directing the flow and force of water towards the tips of the impeller. This gives single jet meters the following advantages over traditional meters: Allows the meter to be installed without any straight pipe in front or behind the meter. Takes force off the bearing and shaft transferring the energy or force of ...
-
Manufactured by Poseidon Systems, LLCbased in USA
A real-time, in-line fluid sensing technology for the detection of metallic wear debris and particulates in a lubrication system. By continuously monitoring wear debris generation, the device alerts users to faults in their earliest stages allowing for lower cost corrective actions than conventional schedule based maintenance. The DM4600 integrates directly with CJC™ Fine Filters. The ...
-
Manufactured by Poseidon Systems, LLCbased in USA
A real-time, in-line fluid sensing technology for the detection of metallic wear debris and particulates in a lubrication system. By continuously monitoring wear debris generation, the device alerts users to faults in their earliest stages allowing for lower cost corrective actions than conventional schedule based maintenance. The DM4500 is a standalone sensor with customizable hose fittings. ...
-
Manufactured by TYMCO, Inc.based in USA
We introduced the TYMCO Model 435 over a decade ago, and our engineering design principles remain the same – deliver street sweeping performance in a parking lot sweeping package. Not only is it built using the high-efficiency, time-tested TYMCO Regenerative Air System that provides unprecedented reliability, but it also delivers incredible performance and an amazingly clean sweep. All of ...
-
Manufactured by Insulation Machinesbased in USA
If you are a contractor that gets an occasional insulation removal job, this machine is perfect! With good production and an excellent price point, this insulation vacuum will give your business the flexibility to take on retrofit and insurance ...
-
Manufactured by Freudenberg Filtration Technologiesbased in GERMANY
micronAir particle filters provide effective protection against fine dust as well as pollen, road dust, wear debris, soot, bacteria, industrial dusts and other respirable fine particles. Exhaust gases from diesel vehicles contain fine dust and soot particles that are smaller than 2,5 micrometers. The mucous membranes of the nose and throat or nasal hairs are able to capture only some of ...
-
Manufactured by TYMCO, Inc.based in USA
The TYMCO® Model 210h® parking lot sweeper is powered by the TYMCO hDrive®Power System. hDrive is an optimized hydraulic power system that gives Model 210h owners all the simplicity and low maintenance of sweeping without an auxiliary engine. The Model 210h delivers everything Model 210 owners have come to love about the TYMCO Regenerative Air System – air sweeping with a dual ...
-
Manufactured by TYMCO, Inc.based in USA
The TYMCO Model 500x truly is refined perfection. We took the best of the Model 600 – unprecedented reliability and incredible power – and integrated cutting edge multiplex electronics and the industry’s highest dumping hopper lift assembly to build the most advanced high dump street sweeper available today. Whether you’re sweeping state highways, city streets or sweeping ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you