Wind Monitoring Equipment available in Haiti

Available in Haiti| Near Haiti
565 Results found

We couldn't find any results in Haiti

Here is a list of results available in Haiti

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Wind Monitoring ×

  • Available in: Latin America ×

  • Available in: Haiti ×

Helipad, Helicopter & Oilrig Systems

by MTECH Systems Pty Ltd     based in Braeside, AUSTRALIA

Mtech has developed customized solutions for both attended and un-attended helipad and oilrig systems. Using specialized hardware and software systems the AWOS is able to allow the incoming pilot to automatically turn on lights and listen to automatically generated ATIS messages with current and accurate weather data for the landing location. ...

Grid Connectivity Solutions

by S&C Electric Company     based in Oswego, ILLINOIS (USA)

Through S&C’s century-long history of innovation, not only have we developed deep expertise in the switching and protection technologies needed to direct the flow of electricity, we’ve become a leading provider of advanced communication systems for making the grid smarter. It’s a combination unmatched by other suppliers. This ...

JDC-WWS - Model 1 - Wind Warning Kit

by Skyview Systems Ltd     based in Sudbury, UNITED KINGDOM

The NEW and improved JDC Skywatch Wind Warning System was developed for the protection of individuals and assets that may be subject to strong damaging winds. It consists of two parts: A display unit showing the wind force, with 4 programmable warning thresholds (2 minimum and 2 maximum). A multidirectional turbine (wind sensor) enabling ...

Met One Instruments - Model 50.5 - Solid State Wind Sensor

by Met One Instruments, Inc.     based in Grants Pass, OREGON (USA)

The 50.5 Solid State Wind Sensor is a continuation of the development work started with NOAA on sonic wind sensors over 25 years ago. This sensor design contains the same wind distortion algorithm and factoring that has been proven and accepted in applications around the world. No other sensor technology has the history of time proven field ...

Wind Speed Profiling

by Logic Beach Inc     based in La Mesa, CALIFORNIA (USA)

Spinning Cup Anemometer Basics - Wind speed and direction are basic parameters typically collected at weather / meteorological data collection sites. One of the most common methods for measuring wind speed is with a wind driven spinning device called a cup anemometer. The spinning cup anemometer consists of three (typically) conical shaped cups ...

LeWL - Wind Logger

by WindLogger     based in Glasgow, UNITED KINGDOM

The new LeWL WindLogger has been manufactured since 2008. We have sold thousands of these little wind data loggers all over the world and they have an excellent reputation for their stability, accuracy and endurance.

Scintec - Model SFAS Series - Flat Array Sodar

by Scintec AG     based in Rottenburg, GERMANY

The Scintec SFAS is a very compact acoustic profiler for the measurement of wind and turbulence up to 500 m above the ground. The operation is based on the reflection of acoustic pulses at temperature inhomogeneities in the air with subsequent doppler analysis.

Kintech - Wind Transmitter

by Kintech Engineering     based in Zaragoza, SPAIN

The wind transmitter is designed for the acquisition of the horizontal component of the wind speed in the field of meteorology and environmental measuring technology, evaluation of location, and measurement of capacity characteristics of wind power systems. Special characters are defined and optimised, dynamic behaviour also at high turbulence ...

WindSonic - Low Cost Ultrasonic Wind Sensor

by Gill Instruments Limited     based in Lymington, UNITED KINGDOM

WindSonic is a robust, low cost ultrasonic wind sensor with no moving parts. This 2-axis ultrasonic wind sensor offers maintenance-free wind speed and direction monitoring for true ‘fit and forget’ wind sensing.The Gill WindSonic is a genuine low cost alternative to conventional cup and vane or propeller wind sensors, with all of the ...

KONCAR - Model RWFDS - Rotor Winding Fault Detection Sensor

by KONCAR - Electrical Engineering Institute Inc.     based in Zagreb, CROATIA

RWFDS represents a new concept in rotor winding fault detection. This smart sensor enables detection of inter coil short circuits in rotor excitation winding based on the differential magnetic field measurement method (DMFM) inside the machine air gap. The DMFM method eliminates the contribution

WindSonic - Model USWSC - Lightweight Ultrasonic Wind Sensor

by RainWise Inc.     based in Trenton, MAINE (USA)

A lightweight ultrasonic wind sensor, WindSonic is of a robust, high strength construction designed to withstand installation and use with no fear of the damage commonly experienced with the more fragile cups, vanes or propellers. Windsonic does not require expensive on-site calibration or maintenance, and with a corrosion free exterior, WindSonic ...

Delta-T - Model AN3-03 - Hi-Res Anemometer (3m Cable)

by Delta-T Devices Ltd     based in Cambridge, UNITED KINGDOM

Suitable for fast changing wind speed measurements such as gusts. Provided with both an analogue and a digital output.

Scarlet - Model WS - Wind Smart Anemometer Wind Smart Anemometer

by Scarlet Tech Ltd.     based in Taipei City, TAIWAN

Scarlet WS wind smart meter turns your smartphone into a high-tech meteorological tool. Takes accurate wind readings, at wind speeds from 0.6 – 40 m/s, with a precision of +/- 3%. The design is inspired by professional cup anemometers and suitable for professional use. Every unit has been through wind tunnel calibration to ensure precision.

Remote Wind Monitoring Data Logger

by WindLogger     based in Glasgow, UNITED KINGDOM

Ideal for wind monitoring applications: remote wind site assessment, wind noise monitoring and acoustics for wind turbine planning applications, safety and climate disputes on construction sites. LeNETmobile, our GPRS remote monitoring unit is a combined hardware data logger with built-in central web server portal to access all your data ...

Felix - Model FT4000 - Wind Sensor (Anemometer) Used for Transmission of Electrically Measured Wind Speed

by Felix Technology Inc.     based in Concord, ONTARIO (CANADA)

The wind speed sensor FT4000 series are used for transmission of electrically measured wind speed. This wind sensor is designed for automatic weather stations which can be used in a wide range of locations such as airports, research vessels, and industrial sites. The availability of simultaneous outputs makes the wind sensor suitable for a wide ...

200-81000 Ultrasonic Anemometer

by NovaLynx Corporation     based in Grass Valley, CALIFORNIA (USA)

The 200-81000 Ultrasonic Anemometer is a three-dimensional no-moving-parts wind sensor. Two-dimensional anemometers meet the need for economy, but they ignore the important vertical wind component. The 200-81000 measure three dimensional wind velocity based on the transit time of ultrasonic acoustic signals. From speed of sound, sonic temperature ...

200-WS-04 WeatherPort Wind Direction Sensors

by NovaLynx Corporation     based in Grass Valley, CALIFORNIA (USA)

This series of WeatherPort Wind Sensors are moderately priced quality transducers designed for general application. A combination of injection molded thermoplastic, anodized aluminum, and stainless steel parts contribute to reliable operation in adverse environments.

Wind Farming Maps

by La Tene Maps     based in Foxrock, IRELAND

The maps in this section deal specifically with wind energy installations, projects and licences.. Apart from the maps listed below which deal specifically with wind farming all of our Electricity Generation and Transmission maps (incl. renewable energy) will have the wind farms on them as will the maps in Renewable Energy Installations section. ...

Model 80m XHD - Wind Resource Assessment Systems

by Renewable NRG Systems     based in Hinesburg, VERMONT (USA)

Bundle your 80 meter tower with a logger kit and a sensor kit to complete the three-part NOW System. Significantly more cost-effective than purchasing components individually, this system offers a fully integrated, easy-to-install approach to wind resource assessment. RNRG offers free surface shipping to most major ports worldwide and directly to ...

Need help finding the right suppliers?

Let the XPRTs do the work for you