Wind Speed Monitor (Wind Speed Monitoring) Equipment
-
Manufactured by Broadweighbased in UNITED KINGDOM
The pre-calibrated Broadweigh Wind Speed Sensor (BW-WSS) anemometer provides both real-time display and in conjunction with LOG100, full logging of wind speeds. With user definable sampling rates and easy wireless installation this anemometer makes an ideal choice for general wind speed ...
-
Manufactured by East 30 Sensorsbased in USA
Affordable and accurate non-directional heated needle anemometer for low wind speeds. The East 30 Sensors anemometer uses heat transfer to monitor air flow as it passes the needle. It is appropriate for many settings including:, Air flow monitoring in greenhouses, Point wind speed determination, ...
-
Manufactured by Richard Paul Russell Limitedbased in UNITED KINGDOM
to end IoT connected wind speed and direction monitoring solution. A WindSonic connector is required for wiring to the ...
-
Manufactured by Richard Paul Russell Limitedbased in UNITED KINGDOM
to end IoT connected wind speed and direction monitoring solution. A WindSonic connector is required for wiring to the ...
-
Manufactured by Richard Paul Russell Limitedbased in UNITED KINGDOM
to end IoT connected wind speed and direction monitoring solution. A WindSonic connector is required for wiring to the ...
-
Manufactured by Aston Evaporative Servicesbased in USA
Alleviates overspray and reduce fallback. Monitors Water Flows in real time. Tracks monthly Gallons /Liters atomized. Monitors Wind Speed with live Shutdown or Slowdown. Remotely stops and starts from the convenience of your computer. Accesses Live Humidity and Barometric Pressure Readings. Download daily, weekly and monthly ...
-
Manufactured by Eigenbrodt GmbH & Co. KGbased in GERMANY
The ship rain gauge is designed to measure rain fall on moving ships or buoys. The high relative flow velocities on a cruising vessel may carry the rain almost horizontally over the ship. By measuring the amount of water that is collected by a vertical surface, a correction for the wind effect is possible. Evidently the local relative wind ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 014A, manufactured by Met One, is a three-cup anemometer that monitors wind speed for the range of 0 to 45 m/s with a threshold of 0.45 m/s. You connect the 014A directly to a Campbell Scientific data logger, which measures the anemometer's pulse signal and converts the signal to engineering units (mph, m/s, ...
-
Manufactured by Gill Instruments Limitedbased in UNITED KINGDOM
The R3-50 3-axis anemometer has been designed for scientific research, particularly suitable for determining fluxes using the eddy covariance technique.This precision ultrasonic anemometer will monitor wind speeds up to 45m/s, with a fast data output rate of 50Hz (100Hz model available, click here to view). U, V, W and SOS (sonic ...
-
Manufactured by Gill Instruments Limitedbased in UNITED KINGDOM
The R3-100 anemometer is ideal for scientific research applications, with a fast sampling rate of 100Hz. This 3-axis ultrasonic anemometer is used extensively for the determination of fluxes using the Eddy Covariance method.R3-100 will monitor wind speeds of 0-45m/s at environmental operating temperatures of -40ºC to +60ºC. ...
-
Manufactured by Gill Instruments Limitedbased in UNITED KINGDOM
WindSonic is a robust, low cost ultrasonic wind sensor with no moving parts. This 2-axis ultrasonic wind sensor offers maintenance-free wind speed and direction monitoring for true ‘fit and forget’ wind sensing.The Gill WindSonic is a genuine low cost alternative to conventional cup ...
-
Manufactured by Gill Instruments Limitedbased in UNITED KINGDOM
The HS-100 3-axis anemometer features a horizontal head design, which allows for accurate measurement of vertical flows with minimum flow interruption from the anemometer geometry.Ideal for scientific research applications, HS-100 is capable of monitoring wind speeds of 0-45m/s and offers a fast update rate of 100Hz for precision ...
-
Manufactured by Gill Instruments Limitedbased in UNITED KINGDOM
from the anemometer geometry. The head features a built-in inclinometer for simple positioning of the instrument on a tower or mast. A separate electronic unit allows easy access to the PRT and 6 analogue inputs.HS-50 will monitor wind speeds of 0-45m/s, with a fast sampling rate of 50Hz. The instrument can be positioned close to the ground or ...
-
Manufactured by Gill Instruments Limitedbased in UNITED KINGDOM
The WindMaster 3D sonic anemometer will monitor wind speeds of 0-45m/s (0-100mph), providing digital outputs for U, V, and W vectors. Outputs for Speed of Sound and Sonic Temperature are available as standard.WindMaster is constructed from aluminium and carbon fibre and is available with either a 20Hz or 32 Hz data output rate. ...
-
Manufactured by Shandong Fengtu IOT Technology Co., Ltdbased in CHINA
FT-WQX series ultrasonic weather station is designed by the standard of WMO(World of Meteorological Orgnization). The instrument is widely used in meteorological monitoring, navigation, environmental protection, animal breeding, pier, bridge, tunnel etc. It can monitor wind speed, wind direction, ambient ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The P2546A, manufactured by WINDSENSOR, is a Class 1 anemometer often used for wind speed resource assessment and wind turbine power performance monitoring. Wind speed is sensed by a three-cup rotor assembly. Magnets mounted on the shaft cause a switch to close and open two times per revolution. ...
-
Manufactured by Adams Environmental Systems, Inc.based in USA
Our standard 10 Meter (33 ft.) Tower comes complete with: R.M. Young Wind Monitor Wind Speed and Direction sensor w/ 40 ft. cable. CSL Temperature and Relative Humidity Sensor w/ 40 ft. cable. R.M. Young 6 plate Solar Radiation Shield for Temp/RH sensor. R.M. Young Barometric Pressure Sensor w/ Pressure Port, 600-1100 hPa, 0-5 ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 034B, manufactured by Met One, combines a three-cup anemometer and vane into a single integrated package to measure wind speed and direction. It is cabled for use with our data loggers, and it can provide you with measurements for a variety of ...
-
Manufactured by Turnkey Instruments Ltdbased in UNITED KINGDOM
The Vibrosound Analyser CM3 is the most simple and reliable way to monitor your site for compliance with noise and vibration legislation. Available in simultaneous Vibration & Type 1 Noise Leq monitoring or Vibration/Noise only, with option for wind speed and direction. The CM3 is fast, accurate and efficient, with tabulation ...
-
Manufactured by Comptus Inc.based in USA
C48 Eight Set Point Wind ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you