Wind Tunnels Equipment For Monitoring And Testing In Asia & Middle East
-
Manufactured by Campbell Scientific, Inc.based in USA
The P2546D, manufactured by WINDSENSOR, is a Class 1 cup anemometer commonly used in wind resource assessment and power performance applications. Each anemometer is individually calibrated compliant with IEC 61400-12-1 and is shipped with a MEASNET calibration certificate. The P2546D features permanent magnets mounted on the shaft that activate an electronic switching current. In response, this ...
-
Manufactured by FT Technologiesbased in UNITED KINGDOM
Precision and reliability are paramount for optimal performance. The DM50 wind sensor sets the industry standard, delivering accurate wind speed, direction and temperature measurements even in the most challenging conditions. For ease of installation, it fits onto a 47.9 to 50.2mm OD pipe and reads wind speeds up to 75m/s. Special alignment collar and mounting tool are available as optional ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The P2546A, manufactured by WINDSENSOR, is a Class 1 anemometer often used for wind speed resource assessment and wind turbine power performance monitoring. Wind speed is sensed by a three-cup rotor assembly. Magnets mounted on the shaft cause a switch to close and open two times per revolution. Our data loggers measure the switch closure and convert the signal to engineering units (mph, m/s, ...
-
Manufactured by R. M. Young Companybased in USA
Introducing the YOUNG Model 86000 next generation 2D Ultrasonic Anemometer. The sensor offers high performance and low power consumption in a compact size. It is ideal for the most demanding wind sensing ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The P2546C, manufactured by WINDSENSOR, is a Class 1 cup anemometer commonly used in wind resource assessment and power performance applications. Each anemometer is individually calibrated compliant with IEC 61400-12-1 and is shipped with a MEASNET calibration certificate. The P2546C features a durable construction and is suitable for both on-shore and off-shore environments. The “C” ...
-
Manufactured by Scarlet Tech Ltd.based in TAIWAN
Scarlet WindSmart bluetooth anemometer turns your smartphone into a high-tech meteorological tool. The professional cup anemometer takes the real-time data of current, average, maximum wind speed, temperature, and wind direction (optional). The sensor can operate with multiple smart devices at the same time. The user may set an audible alarm based on the wind speed value. Every unit has been ...
-
Manufactured by FT Technologiesbased in UNITED KINGDOM
The Flat Front wind sensor is designed for quick and easy installation against a metal bar. Designed to last for up to 20 years, even in an offshore environment, the FT702 model is used by turbine manufacturers around the world. The updated FT722 version reads speeds up to 50m/s and the FT742 reads speeds up to 75m/s. Highly resistant to electromagnetic and acoustic interference, it is also an ...
-
Manufactured by FT Technologiesbased in UNITED KINGDOM
The Pipe Mount wind sensor is designed for installation on top of a pipe or post using the FT090 Pipe Mount Adaptor. Designed to last for up to 20 years, even in an offshore environment, the FT702 model is used by turbine manufacturers around the world. The updated FT722 version reads speeds up to 50m/s and the FT742 reads speeds up to 75m/s. Highly resistant to electromagnetic and acoustic ...
-
Manufactured by FT Technologiesbased in UNITED KINGDOM
Made from a graphite and nylon composite, and weighing only 100g (3.5oz), our lightweight sensors have been specifically designed for use on drones and unmanned aerial vehicles (UAV). Resistant to electrical interference, they are able to operate at altitudes up to 4000m and at temperatures between -20°C and +70°C. The FT205 model measures wind speed, direction, and temperature and ...
-
Manufactured by METEK Meteorologische Messtechnik GmbHbased in GERMANY
Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A convenient user interface offers a flexible adaption to ...
-
Manufactured by FT Technologiesbased in UNITED KINGDOM
The FT742-SM Surface Mount wind sensor is designed for delivering exceptional performance in various applications, including marine and top IMOCA sailing teams. Featuring an electronic compass and a thermostatic heater, this versatile sensor has proven its capabilities in UAVs, drones, military vehicles, autonomous robots, handheld weather stations, drifter buoys, vehicle-mounted, and ship-based ...
-
Manufactured by METEK Meteorologische Messtechnik GmbHbased in GERMANY
Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A convenient user interface offers a flexible adaption to ...
-
Manufactured by METEK Meteorologische Messtechnik GmbHbased in GERMANY
Metek’s ultrasonic anemometers uSonic-3, uSonic-2 and uSonic-1 have acquired wide acceptance as measuring sensors for wind and turbulence. uSonics are made from stainless steel and allow an efficient heating to prevent icing. uSonics are used in eddy-flux installations, in operational networks, at wind turbines or in any industry. A convenient user interface offers a flexible adaption to ...
-
Manufactured by FT Technologiesbased in UNITED KINGDOM
The Direct Mount wind sensor fits directly onto a 33.7mm OD pipe and reads wind speeds up to 75m/s. This makes it ideal for a wide range of meteorological ...
-
Manufactured by R. M. Young Companybased in USA
Introducing the YOUNG Model 86004 next generation 2D Ultrasonic Anemometer. The sensor offers high performance and low power consumption in a compact size. It is ideal for the most demanding wind sensing applications. For extended cold weather use, the 86004 features thermostatically controlled heaters in transducer and housing ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you