Wind Turbine Monitoring Articles

  • Karl Erik Widell, professor emeritus at the University of Aalborg, Institute of Energy Technology, played a key role in the development of MagFan

    Six decades of experience and knowledge Professor Widell’s career spans over almost six decades since he graduated, and includes several advanced R&D projects for The Danish Defence Research Board, ABB, Siemens Industrial Turbomachinery, Grundfos and many other leading companies worldwide. As a leading specialist in aerodynamics on wind turbines, turbo compressors, steam turbines and ...


    By DACS A/S

  • Case study - Use of the Nor848A acoustic camera on wind turbines

    The acoustic camera system Nor848 is a powerful tool to investigate noise sources. In realtime you listen to a beamformed audio signal so that you can hear individual sources one by one. Immediately you can identify the strongest over all noise source in a multisource environment, and you can do the same analysis for single frequencies, 1/3 or 1/1 octave bands or any given frequency range. This ...


    By Norsonic AS

  • Adoption hurdles and challenges with small wind turbines

    Adoption Hurdles and Challenges with Small Wind Turbines Wind energy is very promising. It can be harvested without any costs, and like solar panels, wind turbines are environmentally-friendly. However, such machines are not living up to their potential. Some users have reported low efficiency rates, unpredictable performance and costly adoption barriers. ...


    By Larson Electronics LLC

  • Automated Oil Particle Analysis Helps Prevent Gearbox Failures

    The major issue for premature failure in wind turbine gearboxes is bearing failure, which leads to gearbox failure. A wind turbine gearbox will not survive if the oil is not clean and especially if the hard ferrous particles are not removed from ...


    By Spectro Scientific

  • How RNRG`s Hybrid XT Solutions Can Keep Your Turbine Output from Freezing Over This Winter

    At RNRG’s headquarters in Hinesburg, Vermont, the hillsides are painted with the vibrant hues of autumn. While breathtakingly beautiful, nature’s colorful display is also a reminder that winter is right around the corner. As the first frost looms, now is the perfect time to consider Hybrid XT Turbine Control ...


    By NRG Systems

  • Introducing The RNRG Goalpost Boom

    We are happy to introduce a new goalpost mounting solution for installing redundant class 1 anemometers. This new boom, designed specifically for use with our 80m XHD TallTower, positions anemometer cups at exactly 80 m above ground level—2.5 m away from each other—and 1.99 m ...


    By NRG Systems

  • Wind power is about to get a whole lot cheaper

    Wind energy is soaring around the world, thanks to technology advances and energy policies that have reduced its cost. And things are only going to get better — with prices dropping substantially by mid-century, according to a survey of 163 of the world’s leading wind energy ...


    By Ensia

  • Opening the envelope on bearing vibration

    A sophisticated signal processing technique can help to pinpoint bearing failure at an early stage. Chris Hansford, Managing Director at Hansford Sensors, explains. Experienced operators can often tell if a machine is not working properly, on the basis that is does not ‘sound right’. The same principle can be applied – using modern electronics – to identify the exact cause ...


    By Hansford Sensors

  • Offshore wind installation vessel capacity to tighten after 2020

    The existing fleet of turbine and foundation installation vessels is well suited to serve the European offshore wind market in the short and mid-term but it will not be sufficient to support installation demand after 2020, Michael Guldbrandtsen, senior consultant at MAKE Consulting, told Wind Energy Update. The next 2-3 years will continue to be dominated by orders for jack-up ...

  • Does Wind Turbine Blade Length Really Matter?

    Simply put: Longer wind turbine blade length means greater power production. Blades capture the wind which forces the rotation of the rotor; longer blades means more area for the wind to push against, which means greater force and rotational power. However, how much difference does blade length make overall, in comparison to other factors? There is a standard formula that can be used to apply the ...

  • Wind turbine controlling of the future

    Higher, more robust, more reliable: Parallel to the growing requirements for wind turbines, the requirements for monitoring sensors grow as well. But how can wind sensor manufacturers fulfil these wishes? And how should a future wind sensors look like? After analysing the current conditions and trends on the wind energy market, our CEO Klaus Hirzel compiled a wish list for future wind sensors. ...

  • Power curve measured and verified – Case Study

    In 2010 RSE SpA (Energy System Research Inc.) within a Program Agreement with the Italian Ministry of Economic Development started a measurement campaign on a Libellula wind plant installed in Tuscany. The campaign lasted 1 ½ years and during this time RSE measured the turbine’s power curve following the requirements of the relevant IEC Standard ...


    By Aria s.r.l

  • Animation: How Wind Turbines Work

    The windmill, which converts wind into rotational energy to mill grain or pump water, has been around since antiquity. It’s even been claimed that Ancient Babylonians planned to harness wind as early as almost 4,000 years ago, as part of a scheme for one of Hammurabi’s ambitious irrigation projects. By the end of the 19th century, wind energy took on a whole new meaning as engineers ...


    By GLOBE Foundation

  • Small Wind Turbines tested: “Fortis Montana best performance”

    The market for commercial wind turbines is maturing even as they get bigger and bigger, but the market for small wind turbines is quite young, with some people comparing it to the car industry early in the 19th century. Although some manufacturers have been in the business for over two decades, most suppliers are from this millennium. And that shows. As in most immature markets, there are ...


    By Fortis Wind Energy

  • Occupational safety and health in the wind energy sector

    As the European Union power sector continues its move away from oil, coal and nuclear fuels,wind energy has experienced tremendous growth over the past decade and this is expected to continue. The wind energy sector is relatively young with turbine technology constantly progressing and this creates an ongoing responsibility to ensure workers that conduct tasks such as installations, ...

  • Drones for Wind Turbine Inspection

    Unmanned Aerial Vehicles and Inspection Services for Wind Turbines: Global Market Assessment and Forecasts By the beginning of 2015, there were nearly 270,000 individual wind turbines operating globally. The more than 800,000 blades spinning on these turbines are battered by the elements over time and gradually wear out. Deterioration can cause reduced energy ...

  • UK offshore load factors accelerate on tech breakthroughs: 10-year study

    UK offshore load factors accelerate on tech breakthroughs: 10-year study The Crown Estate’s Offshore Wind Operational report 2015 shows there has been a gradual increase in the load factor for the UK fleet since 2004 on the back of more productive wind turbines, wind farms being built at windier sites and improved plant availability. The Crown Estate manages UK sovereign ...

  • Rising offshore plant capacities lead to greater data-based O&M gains

    The growing size of offshore wind farms provides greater scope for data optimisation during Operations and Maintenance, while software solutions can also help mitigate risk during the development phase, Marcus Ihle, Senior Consultant at Outsmart, said. Further gains could be made if operators share more data from their growing databases with other plant owners, Ihle said. The ...

  • Monopiles to remain Dominant Offshore Foundation in Europe: Consultant

    Monopiles will be Europe’s dominant offshore wind foundation for the next five years despite increasing turbine capacity, Tim Fischer, Head of Wind at German consultancy Ramboll, said. Monopile projects have dominated the offshore wind market but windfarms are moving towards larger turbines requiring larger foundations. While many proponents are promoting ...

  • Athea-Dromada Wind Farm Design and Compliance Studies - Case Study

    Location: Ireland Key Facts: Client: Powerteam Electrical Services Ltd Disciplines: Power Systems Project Description: Project Team: Performed by in-house TNEI Power Systems experts Objective: To conduct a set of wind farm design and ...


    By TNEI Services Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you